Empowering Engineers with

Configurable Components

Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

Part Number Configured Part Number is shown.
SKD61(H13)(1.2344) equivalent +Nitrided
Surface:900HV~
Base material:40±3HRC

Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-:Related Image

Part Number VApplicable center pin shaft diameter tolerance
ESJLH7-0.01
-0.02
*Note that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance is not available. The reason for this is fitting sections S are longer. (Details Click here)

D Tolerance
D≤12D≥15
-0.01
-0.02
-0.01
-0.03

VH7 Tolerance
V≤33.5≤V≤66.5≤V≤10V≥12
+0.010
0
+0.012
0
+0.015
0
+0.018
0

S dimension depends on the designated L dimension.
  S=L-Z
L80.00~
100.00
100.01~
120.00
120.01~
140.00
140.01~
160.00
160.01~
180.00
180.01~
225.00
225.01~
250.00
250.01~
275.00
275.01~
300.00
300.01~
325.00
325.01~
350.00
350.01~
375.00
375.01~
400.00
400.01~
425.00
425.01~
450.00
450.01~
475.00
475.01~
500.00
Z50
(60)
70
(80)
90
(100)
85105125150175185210235225250275300325350
Figures in parentheses are applicable for V1.5.
Note that the stepped center pin's shaft diameter (D) is too large to fit in the recess (C).(Details Click here)

b1(Range of guaranteed shaft diameter precision)(Details Click here)
x1 max.=30
Range of guaranteed base material hardness (Details Click here)
Range of guaranteed surface hardness for nitriding (Details Click here)

Basic Information

Product composition Single sleeve Material H13 Surface treatment Nitrided
Concentricity between the hole and shaft diameters ◎0.06 Boring method Reaming Inner dia. tolerance H7
Tapered or not No Center pin tip shape No

Configure

Clear All

Specification/Dimensions

  • Type

    • ESJL
  • Product composition

    • Single sleeve
  • Material

    • H13
  • Surface treatment

    • Nitrided
  • Head thickness

    • 6mm(JIS)
    • 8mm(JIS)
  • Shaft diameter tolerance

    • -0.01/-0.02
    • -0.01/-0.03
  • D/P (Shaft diameter)(mm)

    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 9
    • 10
    • 12
    • 15
    • 20
    [2.5-15.99/0.01mm increments] [16.01-19.99/0.01mm increments]
  • V (Hole diameter)(mm)

    • 1.5
    • 2
    • 2.5
    • 3
    • 5
    • 8
    • 8.5
    • 9
    • 10
    • 12
    • 15
    [0.8-12.2/0.01mm increments] [1-8.5/0.5mm increments] [1.5-16/0.1mm increments] [2.1-2.4/0.1mm increments] [2.6-2.9/0.1mm increments] [3.1-3.9/0.1mm increments] [3.6-3.9/0.1mm increments] [4.1-5.9/0.1mm increments] [6.1-7.9/0.1mm increments] [7-10/1mm increments] [8-8.5] [80-300/0.01mm increments]
  • Concentricity between the hole and shaft diameters

    • ◎0.06
  • Boring method

    • Reaming
  • Inner dia. tolerance

    • H7
  • Tapered or not

    • No
  • Center pin tip shape

    • No
  • L (L dimension)(mm)

    [80-500/0.01mm increments]
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • 5 Days or Less

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
TEL:847-843-9105 (ext.370) / FAX:847-843-9107
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry