Empowering Engineers with Configurable Components

  • 10 Million Products
  • 30,000 Same Day Shipping Products
  • Competitive Prices

All Categories

Automation Components
Press Die Components
Plastic Mold Components

Need Help?

お見積り・ご注文・サイトに関するお問い合わせ

QCTマーケティングセンター0120-343-066
受付時間: 8:00~20:00
※日曜日・年末年始は除く

一般流通品(ミスミブランド以外のメーカー品)の
納期調整・商品に関するお問合せ

VONAサポートセンター0120-343-256
受付時間: 平日 9:00~18:00
土・祝 9:00~17:00
※日曜日・年末年始は除く

商品・技術に関するお問合せ窓口一覧

受付時間: 9:00~12:00、13:00~18:00 ※日曜日・年末年始は除く

  • FA用メカニカル標準部品03-5805-7290 / 7291
  • FA用メカニカル加工部品03-5805-7224
  • プレス金型用標準部品03-5805-7240
  • プラ型用標準部品03-5805-7190

Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-

Part Number Configured Part Number is shown.
•Material Table

Part Number
TypeStepShape
Shaft diameter (D) selection typeShaft diameter (P) designation type
Shaft diameter tolerance
V•A tolerance ±0.015
Shaft diameter tolerance
V•A tolerance ±0.01
Shaft diameter tolerance
V•A tolerance ±0.015
Shaft diameter tolerance
V•A tolerance ±0.01
SKD61(H13)(1.2344) eqivalent
48~52HRC
S-CPD-S-CPP-S-CPDB-S-CPPB-1A

1B

1C

1D
Not
processed

C

T

R

B
SKH51(M2)(1.3343) eqivalent
58~60HRC
S-CPX-S-CPH-S-CPXB-S-CPHB-


Step type selected from 1A~1D below Shape (Tip shape: V is dimension before tip processing.)

Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
ℓ≥0.3+α
(Not processed)
Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
Designation of the shape is unnecessary when tip processing is not required
α=0 θ<10°

Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
ℓ≥0.4+α
(C chamfered)
Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
0.1≤G 0.1mm increments
α=G θ<10°

Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
ℓ≥Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image+0.3+α

ℓ≥Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image+0.3+α
(Tapered)
Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
0.1≤S<
0.1mm increments
10≤K≤45
1° increments
α=S θ

Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
ℓ≥C+0.3+α
C=Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related ImageTip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image1C
(R chamfered)
Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
0.2≤Q 0.1mm increments
α=Q θ<10°
(Spherical processed)
Tip (L) Short One-Step Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-:Related Image
α=V/2 θ<10°
Refer to the drawing for L tolerance

(Calculation of tip gradient θ Click here)

Basic Information

Shape type One-step Surface treatment No Head thickness 4mm(T4)
Step (Step shape of the second step) No second step

Configure

Clear All

Specification/Dimensions

  • Shape type

    • One-step
  • Material

    • M2
    • H13
  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02
  • L dimension tolerance

    • +0.02/0
    • 0/-0.1
  • Tip gradient tolerance

    • ±0.01
    • ±0.015
  • Surface treatment

    • No
  • Head thickness

    • 4mm(T4)
  • D/P (Shaft diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    [0.8-119.5/0.01mm increments] [0.8-119.505/0.005mm increments] [0.8-12.999/0.001mm increments] [6.5-6.99/0.005mm increments] [7-7.99/0.005mm increments] [8-9.99/0.005mm increments] [10-12.99/0.005mm increments] [13-15.99/0.005mm increments] [16-19.99/0.005mm increments]
  • Step (Step shape of the first step)

    • 1A
    • 1B
    • 1C
    • 1D
  • Step (Step shape of the second step)

    • No second step
  • Shape (Tip shape)

    • No processing
    • C
    • T
    • R
    • B
  • No. (Nominal diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
  • A (Step shape diameter)(mm)

    [0.4-5.99/0.01mm increments]
  • C (Step type taper width)(mm)

    [0.1-0.5/0.01mm increments]
  • F (Bearing bore length)(mm)

    [10-99.7/0.01mm increments]
  • FC (Makes F dimension shorter than F min)(mm)

    [5-9.99/0.01mm increments]
  • G (Tip C chamfering width)(mm)

    [0.1-2.9/0.1mm increments] [0.1-2.95/0.05mm increments]
  • K (Tip angle)(°)

    [10-45/1° increments]
  • L (L dimension)(mm)

    [6.5-100/0.01mm increments]
  • Q (Tip R chamfering)(mm)

    [0.2-1.2/0.5mm increments] [0.2-2.9/0.1mm increments] [0.2-2.95/0.05mm increments]
  • S (Tip tapered width)(mm)

    [0.1-7.8/0.05mm increments] [0.1-7.8/0.1mm increments]
  • V (Tip diameter)(mm)

    [0.5-5.99/0.01mm increments]
  • VC (V dimension alteration, smaller than V min)(mm)

    [0.4-1.99/0.01mm increments]
  • Type

    • S-CPD-1CT
    • S-CPDB-1CT
    • S-CPX-1CT
    • S-CPXB-1CT
    • S-CPP-1C
    • S-CPPB-1DC
    • S-CPPB-1DB
    • S-CPPB-1B
    • S-CPXB-1BB
    • S-CPHB-1B
    • S-CPP-1DT
    • S-CPDB-1AC
    • S-CPPB-1C
    • S-CPDB-1BC
    • S-CPX-1AC
    • S-CPX-1BB
    • S-CPD-1DT
    • S-CPP-1CB
    • S-CPXB-1DB
    • S-CPH-1DB
    • S-CPPB-1AT
    • S-CPX-1DC
    • S-CPHB-1DB
    • S-CPHB-1CR
    • S-CPHB-1DR
    • S-CPX-1AR
    • S-CPXB-1DC
    • S-CPDB-1AT
    • S-CPPB-1DT
    • S-CPPB-1BB
    • S-CPX-1D
    • S-CPD-1AT
    • S-CPP-1DB
    • S-CPD-1DR
    • S-CPX-1BT
    • S-CPDB-1B
    • S-CPHB-1BB
    • S-CPP-1B
    • S-CPPB-1A
    • S-CPH-1CR
    • S-CPD-1DC
    • S-CPXB-1BC
    • S-CPX-1A
    • S-CPH-1D
    • S-CPH-1BB
    • S-CPH-1C
    • S-CPH-1AR
    • S-CPDB-1A
    • S-CPHB-1CC
    • S-CPP-1AT
    • S-CPDB-1D
    • S-CPDB-1BB
    • S-CPP-1BR
    • S-CPX-1BC
    • S-CPXB-1DR
    • S-CPD-1A
    • S-CPHB-1AT
    • S-CPD-1BR
    • S-CPH-1A
    • S-CPPB-1CB
    • S-CPHB-1BR
    • S-CPXB-1AT
    • S-CPX-1AB
    • S-CPD-1B
    • S-CPDB-1CR
    • S-CPP-1A
    • S-CPHB-1AC
    • S-CPD-1CR
    • S-CPXB-1BT
    • S-CPPB-1D
    • S-CPXB-1C
    • S-CPHB-1AR
    • S-CPDB-1BR
    • S-CPD-1AR
    • S-CPPB-1AR
    • S-CPHB-1C
    • S-CPH-1DR
    • S-CPDB-1AB
    • S-CPDB-1C
    • S-CPHB-1BT
    • S-CPX-1BR
    • S-CPD-1AC
    • S-CPD-1BT
    • S-CPH-1BT
    • S-CPX-1DB
    • S-CPDB-1AR
    • S-CPPB-1CT
    • S-CPH-1CT
    • S-CPXB-1DT
    • S-CPP-1AB
    • S-CPXB-1AC
    • S-CPX-1B
    • S-CPP-1BT
    • S-CPD-1BC
    • S-CPX-1DR
    • S-CPP-1BB
    • S-CPHB-1A
    • S-CPP-1DC
    • S-CPP-1BC
    • S-CPDB-1DR
    • S-CPXB-1CB
    • S-CPPB-1BT
    • S-CPHB-1CB
    • S-CPXB-1AB
    • S-CPP-1CT
    • S-CPHB-1BC
    • S-CPX-1DT
    • S-CPX-1CR
    • S-CPH-1CB
    • S-CPXB-1AR
    • S-CPD-1AB
    • S-CPXB-1D
    • S-CPDB-1DB
    • S-CPPB-1CR
    • S-CPP-1CC
    • S-CPHB-1AB
    • S-CPH-1DT
    • S-CPD-1DB
    • S-CPHB-1DC
    • S-CPH-1CC
    • S-CPX-1AT
    • S-CPXB-1A
    • S-CPPB-1CC
    • S-CPP-1DR
    • S-CPH-1AB
    • S-CPDB-1DT
    • S-CPP-1AR
    • S-CPXB-1CR
    • S-CPXB-1BR
    • S-CPD-1C
    • S-CPDB-1CC
    • S-CPX-1CB
    • S-CPPB-1AB
    • S-CPX-1C
    • S-CPH-1DC
    • S-CPD-1BB
    • S-CPP-1AC
    • S-CPPB-1BR
    • S-CPD-1D
    • S-CPP-1D
    • S-CPXB-1CC
    • S-CPPB-1BC
    • S-CPHB-1D
    • S-CPH-1BC
    • S-CPDB-1BT
    • S-CPX-1CC
    • S-CPHB-1DT
    • S-CPD-1CB
    • S-CPH-1AT
    • S-CPH-1BR
    • S-CPDB-1DC
    • S-CPPB-1DR
    • S-CPHB-1CT
    • S-CPD-1CC
    • S-CPH-1B
    • S-CPXB-1B
    • S-CPH-1AC
    • S-CPP-1CR
    • S-CPPB-1AC
    • S-CPDB-1CB
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • 5 Days or Less

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
TEL:847-843-9105 (ext.370) / FAX:847-843-9107
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry