Empowering Engineers with Configurable Components

  • 10 Million Products
  • 30,000 Same Day Shipping Products
  • Competitive Prices

All Categories

Automation Components
Press Die Components
Plastic Mold Components

Need Help?

お見積り・ご注文・サイトに関するお問い合わせ

QCTマーケティングセンター0120-343-066
受付時間: 8:00~20:00
※日曜日・年末年始は除く

一般流通品(ミスミブランド以外のメーカー品)の
納期調整・商品に関するお問合せ

VONAサポートセンター0120-343-256
受付時間: 平日 9:00~18:00
土・祝 9:00~17:00
※日曜日・年末年始は除く

商品・技術に関するお問合せ窓口一覧

受付時間: 9:00~12:00、13:00~18:00 ※日曜日・年末年始は除く

  • FA用メカニカル標準部品03-5805-7290 / 7291
  • FA用メカニカル加工部品03-5805-7224
  • プレス金型用標準部品03-5805-7240
  • プラ型用標準部品03-5805-7190

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-

Part Number Configured Part Number is shown.
•Material Table

Part Number
Type Step Shape D•DC A•V
NAK80(P21 group)(Ni-Cr-Mo-steel)
37~43HRC
GV-CPN- 1A
1B
1C
1D
Not processed
C
G
T
R
B
-0.01
-0.02
±0.015
DH2F(H13 group)(1.2344 group)
38~42HRC
GV-CPF-
SKD61(H13)(1.2344) equivalent
48~52HRC
GV-CPD-
SKH51(M2)(1.3343) equivalent
58~60HRC
GV-CPX-
NAK80(P21 group)(Ni-Cr-Mo-steel)
37~43HRC
GV-CPK- 0
-0.005
±0.01
DH2F(H13 group)(1.2344 group)
38~42HRC
GV-CPG-
SKD61(H13)(1.2344) equivalent
48~52HRC
GV-CPP-
SKH51(M2)(1.3343) equivalent
58~60HRC
GV-CPH-

Step type selected from 1A~1D below   Shape (Tip shape: V is dimension before tip processing.)

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
When D, DC=D
can't be designated DC
ℓ≥0.5+α
(Not processed)
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
Designation of the shape is unnecessary when tip processing is not required
α=0

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
When D, DC=D
can't be designated DC
ℓ≥0.7+α
(C chamfered)
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
0.5≤G 0.1mm increments
α=G θ<45°

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
When D, DC=D
can't be designated DC
ℓ≥+0.5+α

ℓ≥+0.5+α
(Cone)
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
20 1° increments
α=θ

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
When D, DC=D
can't be designated DC
ℓ≥C+0.5+α
C=Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image1C
(Tapered)
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
0.1≤S<
0.1mm increments
10≤K≤45
1° increments
α=S θ
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
(R chamfered)
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
0.2≤Q 0.1mm increments
α=Q
(Spherical processed)
Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-:Related Image
α=V/2
(Calculation of tip gradient θ Click here)

Basic Information

Shape type One-step gas release Surface treatment No Head thickness 4mm(T4)
Step (Step shape of the second step) No second step

Configure

Clear All

Specification/Dimensions

  • Shape type

    • One-step gas release
  • Material

    • M2
    • H13
    • NAK80
    • DH2F
  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02
  • L dimension tolerance

    • +0.02/0
    • 0/-0.1
  • Tip gradient tolerance

    • ±0.01
    • ±0.015
  • Surface treatment

    • No
  • Head thickness

    • 4mm(T4)
  • D/P (Shaft diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 10
    • 13
    [0.8-119.5/0.01mm increments] [0.8-119.505/0.005mm increments] [0.8-12.999/0.001mm increments] [6.5-6.99/0.005mm increments] [7-7.99/0.005mm increments] [8-9.99/0.005mm increments] [10-12.99/0.005mm increments] [13-15.99/0.005mm increments] [16-19.99/0.005mm increments]
  • Step (Step shape of the first step)

    • 1A
    • 1B
    • 1C
    • 1D
  • Step (Step shape of the second step)

    • No second step
  • Shape (Tip shape)

    • No processing
    • C
    • G
    • T
    • R
    • B
  • A (Step shape diameter)(mm)

    [0.4-12.99/0.01mm increments]
  • C (Step type taper width)(mm)

    [0.1-4/0.1mm increments]
  • CVC (Designation of C dimension in increments of 0.01mm)(mm)

    • 0.5
    [0.5-1/0.01mm increments]
  • DC (Gas release section diameter)(mm)

    [0.92-0.995/0.005mm increments] [1.42-1.495/0.005mm increments] [1.92-1.995/0.005mm increments] [2.42-2.495/0.005mm increments] [2.92-2.995/0.005mm increments] [3.42-3.495/0.005mm increments] [3.92-3.995/0.005mm increments] [4.42-4.495/0.005mm increments] [4.92-4.995/0.005mm increments] [5.42-5.495/0.005mm increments] [5.92-5.995/0.005mm increments] [6.92-6.999/0.001mm increments] [7.92-7.999/0.001mm increments] [9.92-9.999/0.001mm increments] [12.92-12.999/0.001mm increments]
  • Extend the flat section SV to the bottom

    • SVC
  • F (Bearing bore length)(mm)

    [14.5-119.8/0.01mm increments]
  • FC (Makes F dimension shorter than F min)(mm)

    [5-14.49/0.01mm increments]
  • G (Tip C chamfering width)(mm)

    • 0.4
    • 0.5
    [0.5-6.4/0.1mm increments]
  • K (Tip angle)(°)

    [10-60/1° increments]
  • L (L dimension)(mm)

    [16.5-120/0.01mm increments]
  • N (Gas release section diameter)(mm)

    [0.3-15/0.1mm increments]
  • Q (Tip R chamfering)(mm)

    [0.2-2.9/0.1mm increments]
  • S (Tip tapered width)(mm)

    [0.1-36.8/0.1mm increments]
  • SV (Gas release facet cutting length)(mm)

    [2-60/0.5mm increments]
  • V (Tip diameter)(mm)

    [0.5-12.99/0.01mm increments]
  • VC (V dimension alteration, smaller than V min)(mm)

    [0.4-0.49/0.01mm increments] [0.7-1.99/0.01mm increments]
  • When DC = D, DCX is applied

    • DCX
  • Type

    • GV-CPP-1BC
    • GV-CPG-1DT
    • GV-CPN-1D
    • GV-CPF-1AG
    • GV-CPF-1AT
    • GV-CPK-1CG
    • GV-CPP-1C
    • GV-CPP-1CB
    • GV-CPP-1BB
    • GV-CPG-1DC
    • GV-CPF-1AR
    • GV-CPG-1BG
    • GV-CPG-1CG
    • GV-CPG-1DG
    • GV-CPP-1DG
    • GV-CPG-1DR
    • GV-CPG-1AG
    • GV-CPF-1CG
    • GV-CPF-1A
    • GV-CPN-1CG
    • GV-CPG-1AT
    • GV-CPD-1DC
    • GV-CPD-1BT
    • GV-CPD-1BR
    • GV-CPX-1CG
    • GV-CPG-1BT
    • GV-CPP-1BG
    • GV-CPK-1B
    • GV-CPH-1CR
    • GV-CPP-1DB
    • GV-CPH-1BR
    • GV-CPH-1D
    • GV-CPF-1D
    • GV-CPX-1AT
    • GV-CPK-1AB
    • GV-CPN-1AC
    • GV-CPN-1BG
    • GV-CPN-1BB
    • GV-CPN-1AR
    • GV-CPP-1BR
    • GV-CPD-1CT
    • GV-CPK-1BB
    • GV-CPG-1A
    • GV-CPD-1CC
    • GV-CPF-1AB
    • GV-CPP-1AR
    • GV-CPN-1DB
    • GV-CPG-1AC
    • GV-CPG-1CB
    • GV-CPP-1AG
    • GV-CPH-1AR
    • GV-CPG-1BC
    • GV-CPK-1DG
    • GV-CPK-1CB
    • GV-CPD-1BC
    • GV-CPK-1CC
    • GV-CPK-1AG
    • GV-CPX-1BC
    • GV-CPN-1CT
    • GV-CPG-1CR
    • GV-CPG-1AB
    • GV-CPF-1C
    • GV-CPX-1AB
    • GV-CPH-1B
    • GV-CPD-1CB
    • GV-CPP-1CT
    • GV-CPH-1AB
    • GV-CPK-1DB
    • GV-CPH-1DT
    • GV-CPD-1DT
    • GV-CPF-1B
    • GV-CPN-1DR
    • GV-CPG-1CT
    • GV-CPD-1DG
    • GV-CPG-1BB
    • GV-CPD-1AB
    • GV-CPH-1CC
    • GV-CPF-1BG
    • GV-CPP-1D
    • GV-CPD-1C
    • GV-CPX-1AC
    • GV-CPN-1BT
    • GV-CPH-1BG
    • GV-CPF-1CT
    • GV-CPX-1AG
    • GV-CPH-1CB
    • GV-CPD-1DR
    • GV-CPH-1C
    • GV-CPN-1DC
    • GV-CPD-1CG
    • GV-CPX-1BG
    • GV-CPG-1C
    • GV-CPK-1AC
    • GV-CPG-1D
    • GV-CPX-1CT
    • GV-CPN-1CB
    • GV-CPN-1DT
    • GV-CPP-1A
    • GV-CPN-1B
    • GV-CPP-1BT
    • GV-CPK-1DT
    • GV-CPK-1DC
    • GV-CPX-1CC
    • GV-CPF-1AC
    • GV-CPK-1D
    • GV-CPX-1D
    • GV-CPF-1DC
    • GV-CPF-1BT
    • GV-CPN-1AB
    • GV-CPF-1CB
    • GV-CPF-1CC
    • GV-CPX-1A
    • GV-CPX-1C
    • GV-CPF-1DT
    • GV-CPN-1DG
    • GV-CPK-1A
    • GV-CPD-1BG
    • GV-CPP-1AT
    • GV-CPH-1DB
    • GV-CPK-1BR
    • GV-CPF-1BR
    • GV-CPN-1AT
    • GV-CPX-1BR
    • GV-CPD-1B
    • GV-CPP-1DR
    • GV-CPX-1CB
    • GV-CPF-1BC
    • GV-CPF-1BB
    • GV-CPP-1DC
    • GV-CPN-1BR
    • GV-CPK-1AT
    • GV-CPN-1CC
    • GV-CPD-1AR
    • GV-CPH-1DG
    • GV-CPH-1BC
    • GV-CPN-1A
    • GV-CPX-1B
    • GV-CPP-1CR
    • GV-CPK-1DR
    • GV-CPG-1DB
    • GV-CPH-1CG
    • GV-CPX-1DR
    • GV-CPX-1BB
    • GV-CPX-1CR
    • GV-CPK-1AR
    • GV-CPK-1C
    • GV-CPF-1DB
    • GV-CPK-1CR
    • GV-CPP-1CC
    • GV-CPK-1CT
    • GV-CPG-1CC
    • GV-CPH-1AT
    • GV-CPH-1CT
    • GV-CPN-1BC
    • GV-CPX-1DB
    • GV-CPD-1AG
    • GV-CPG-1B
    • GV-CPK-1BT
    • GV-CPK-1BG
    • GV-CPF-1CR
    • GV-CPP-1AC
    • GV-CPH-1DC
    • GV-CPF-1DG
    • GV-CPD-1DB
    • GV-CPP-1AB
    • GV-CPD-1CR
    • GV-CPH-1BB
    • GV-CPD-1BB
    • GV-CPX-1DT
    • GV-CPH-1DR
    • GV-CPP-1DT
    • GV-CPF-1DR
    • GV-CPH-1AC
    • GV-CPP-1B
    • GV-CPX-1DC
    • GV-CPX-1DG
    • GV-CPN-1AG
    • GV-CPN-1CR
    • GV-CPH-1A
    • GV-CPH-1AG
    • GV-CPD-1D
    • GV-CPP-1CG
    • GV-CPX-1BT
    • GV-CPD-1A
    • GV-CPN-1C
    • GV-CPX-1AR
    • GV-CPD-1AT
    • GV-CPH-1BT
    • GV-CPG-1BR
    • GV-CPK-1BC
    • GV-CPD-1AC
    • GV-CPG-1AR
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • 5 Days or Less

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
TEL:847-843-9105 (ext.370) / FAX:847-843-9107
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry