Empowering Engineers with

Configurable Components

R-Chamfered Rectangular Block Core Pins -Straight Type/Flange Type-

Part Number Configured Part Number is shown.
•Material Table
Type
()
Part Number
One place of R Two places of R Three places of R Four places of R
Straight SKH51(M2)(1.3343)
(61~64HRC)
SPHD-1AR SPHD-2AR
SPHD-2BR
SPHD-2CR
SPHD-3AR SPHD-4R
NAK80(P21 group)(Ni-Cr-Mo-steel)
(37~43HRC)
BCSSN-1AR BCSSN-2AR
BCSSN-2BR
BCSSN-2CR
BCSSN-3AR BCSSN-4R
With flange SKH51(M2)(1.3343)
(61~64HRC)
BCSH-1AR
BCSH-
1BR
BCSH-2AR
BCSH-2BR
BCSH-2CR
BCSH-2DR
BCSH-3AR
BCSH-3BR
BCSH-4R
NAK80(P21 group)(Ni-Cr-Mo-steel)
(37~43HRC)
BCSN-1AR
BCSN-1BR
BCSN-2AR
BCSN-2BR
BCSN-2CR
BCSN-2DR
BCSN-3AR
BCSN-3BR
BCSN-4R

R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image

Type Shape (Details of R position)
One place of R Two places of R Three places of R Four places of R
Straight 1AR (1) Upper left 2AR (1) Upper left (2) Upper right 2BR (1) Upper left (3) Lower left 2CR (1) Upper left (4) Lower right 3AR (1) Upper left (2) Upper right (3) Lower left 4R Four places
R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image
With flange 1AR (1) Upper left 2AR (1) Upper left (2) Upper right 2CR (1) Upper left (4) Lower right 3AR (1) Upper left (2) Upper right (3) Lower left 4R Four places
R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image
1BR (2) Upper right 2BR (1) Upper left (3) Lower left 2DR (2) Upper right (4) Lower right 3BR (1) Upper left (2) Upper right (4) Lower right
R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image R tolerance (reference value)
within +0.02

No. of R machining Shape R position
(1) Upper left (2) Upper right (3) Lower left (4) Lower right
One place 1AR (1) - - -
1BR - (2) - -
Two places 2AR (1) (2) - -
2BR (1) - (3) -
2CR (1) - - (4)
2DR - (2) - (4)
Three places 3AR (1) (2) (3) -
3BR (1) (2) - (4)
Four places 4R (1) (2) (3) (4)
R-CHAMFERED  RECTANGULAR  BLOCK  CORE  PINS  -STRAIGHT  TYPE/FLANGE  TYPE-:Related Image

Basic Information

Tip shape No tip processing Number of engraving characters Without engraving characters

Configure

Clear All

Specification/Dimensions

  • Type

    • SPHD-1AR
    • BCSN-2AR
    • SPHD-4R
    • BCSH-1BR
    • BCSN-2BR
    • BCSH-1AR
    • BCSH-4R
    • SPHD-2BR
    • SPHD-2AR
    • BCSN-3AR
    • BCSSN-2BR
    • BCSN-1AR
    • BCSH-3BR
    • BCSSN-1AR
    • BCSN-1BR
    • BCSSN-3AR
    • BCSN-3BR
    • BCSH-2AR
    • BCSN-2DR
    • BCSH-2DR
    • BCSSN-2CR
    • SPHD-2CR
    • BCSN-2CR
    • BCSH-3AR
    • SPHD-3AR
    • BCSH-2CR
    • BCSSN-2AR
    • BCSSN-4R
    • BCSH-2BR
    • BCSN-4R
  • Material

    • M2
    • NAK80
  • With/without flange

    • Yes
    • No
  • Tip shape

    • No tip processing
  • R-chamfered position

    • 1AR
    • 2AR
    • 2BR
    • 2CR
    • 3AR
    • 4R
    • 1BR
    • 2DR
    • 3BR
  • Number of engraving characters

    • Without engraving characters
  • F (Flange position)(°)

    • 0
  • Hardness

    • 37~43HRC
    • 61~64HRC
  • H (Flange thickness)(mm)

    • 4
    • 6
  • HC (Changes the flange thickness)(mm)

    [2-5.9/0.1mm increments]
  • L (L dimension)(mm)

    [10-70/0.01mm increments]
  • P (Outer diameter)(mm)

    [1-20/0.01mm increments]
  • R (Corner R)(mm)

    • 0.1
    • 0.15
    • 0.2
  • W (External shape)(mm)

    [1-20/0.01mm increments]
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • 5 Days or Less

Tech Support

Die & Mold Division
TEL:847-843-9105 (ext.370) / FAX:847-843-9107
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry