Empowering Engineers with

Configurable Components

Adjustable Pins For Runner Flow

Part Number Configured Part Number is shown.
Type (Select the runner groove shape from the drawings below)
■Stopper
RFAN (L dimension selection type)
RFAL (L dimension designation type)
Adjustable Pins For Runner Flow:Related Image
 The hexagon socket is finished by electric discharge.(Adjustable Pins For Runner Flow:Related Image)
*ℓ= L dimension selection type
F=L dimension designation type
 Pin SKD61(H13)(1.2344)
48~52HRC
 Stopper SKD61(H13)(1.2344) comparable
Left-hand screw special screw plug

Shape1 Top shape
N (No groove)
Adjustable Pins For Runner Flow:Related Image
I
Adjustable Pins For Runner Flow:Related Image
Y
Adjustable Pins For Runner Flow:Related Image

Shape2 Side shape
Shape A (Trapezoid)
Adjustable Pins For Runner Flow:Related Image
Available to select the trapezoidal taper angle (GC°).
For details, refer to the Alterations column at lower right.
Without GC, taper angle is 10°.
Not available for D8
When Shape 1 is Y, A5 and A6 are impossible to process for the hexagonal wrench fitness get worse.
Shape B (Semicircle)
Adjustable Pins For Runner Flow:Related Image
When Shape 1 is Y, B3~B4 are impossible to process for the hexagonal wrench fitness get worse.
Shape C (Arc+Tangent)
Adjustable Pins For Runner Flow:Related Image
When Shape 1 is Y, C3.5 and C4 are impossible to process for the hexagonal wrench fitness get worse.

Basic Information

Flow quantity adjustable pin type Pin

Configure

Clear All

Specification/Dimensions

  • Type

    • RFAL
    • RFAN
  • Flow quantity adjustable pin type

    • Pin
  • D (Runner flow rate adjustment pin diameter)(mm)

    • 8
    • 10
    • 13
    • 16
  • Top shape

    • N
    • I
    • Y
  • Dimension designation type

    • L dimension designation
    • L dimension selection
  • A (Groove width, Runner groove, Shape A)(mm)

    • 3
    • 4
    • 5
    • 6
  • B (Semicircle, Runner groove, Shape B)(mm)

    • 1
    • 1.25
    • 1.5
    • 1.75
    • 2
    • 2.25
    • 2.5
    • 3
    • 3.5
    • 4
  • C (Virtual circle diameter, Runner groove, Shape C)(mm)

    • 2
    • 2.5
    • 3
    • 3.5
    • 4
  • F (Ejector pin guide length)(mm)

    [8-30/0.1mm increments]
  • L (L dimension)(mm)

    • 20
    • 25
    • 30
    • 35
    • 40
    • 50
    • 60
    [15-60/0.1mm increments]
  • LC (L dimension alteration)(mm)

    [20-59.9/0.1mm increments]
  • P (Inner diameter)(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • ALL
    • 5 Days or Less

Tech Support

Die & Mold Division
TEL:847-843-9105 (ext.370) / FAX:847-843-9107
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry