{"id":1172,"date":"2015-06-19T17:43:11","date_gmt":"2015-06-19T22:43:11","guid":{"rendered":"http:\/\/blog.misumiusa.com\/?p=1172"},"modified":"2015-06-19T17:43:11","modified_gmt":"2015-06-19T22:43:11","slug":"video-locatingpins-part1","status":"publish","type":"post","link":"https:\/\/blog.misumiusa.com\/video-locatingpins-part1\/","title":{"rendered":"E2E Video: Locating Pins Part 1 – Workholding Concepts"},"content":{"rendered":"

The Basics of Workholding Concepts introduces our newest Engineer to Engineer<\/a> series on Locating Pins<\/a>. As this series progresses, we will delve deeper into the types of locating pins and their uses.<\/p>\n

Workholding is a term used when manufacturing products, but not everyone is aware of what this entails.\u00a0 Workholding, at its purest form, is simply securing a workpiece to allow for machining or other similar industrial processes to be done in a uniform and repeatable fashion.\u00a0 The introduction of basic workholding methods like locating and clamping paved the way for high volume assembly and manufacturing lines, as parts were able to be reproduced accurately in mass quantities.<\/p>\n

Typically, a workholding unit is referred to as a jig or a fixture<\/a>, depending on whether the assembly is being used to guide a tool or operation, like drilling, tapping, or assembly of dowel pins <\/a>[jig], or is simply holding the workpiece in place, relative to the cutting tool or operation [fixture].<\/p>\n

Subscribe to our YouTube Channel at http:\/\/www.youtube.com\/MisumiUSA<\/a> to be the first to know when the next video in this series is available, with\u00a0a focus\u00a0on\u00a0different locating pin head types.<\/p>\n