Timing Pulleys & Idlers（Material：Stainless Steel）

Timing Pulleys and Idlers are toothed gears that mesh with a belt rather than each other. They are lubrication-free, corrosion-resistant, and have reduced noise and cost impact when compared to traditional chain and sprocket mechanisms. There are many tooth profiles to handle a variety of applications. Trapezoidal profiles like "L," "T," and "AT" are great for conveyance, where the belt will be running for hours continuously. Curvilinear profiles like "S#M," "GT," and "EV" are ideal for high-torque positioning applications where the belt will need to change directions often and require low backlash.

About Timing Pulleys, Idlers

Unit		Imperial Series (inch)				Metric Series (mm)
Application		General				Light Load Conveyance	Heavy Load Conveyance	High Torque		Super High Torque		High Accuracy Positioning	NEW High Positioning Accuracy, High Torque
Belt Type		MXL	XL	L	H	T5,T10	AT5,AT10	S2M-S14M	P2M-P8M	UP5M-UP8M	MTS8M	2GT-EV8YU	MR2-MR5
Pitch		0.800"	0.200"	0.375"	0.5"	5,10 mm	5,10 mm	2,3,5,8,14 mm	2,3,5,8 mm	5,8 mm	5 mm	2,3,5,8 mm	2,3,5 mm
Tooth Profile		Trapezoidal				Trapezoidal		Curvilinear Circular (S-Type)	Curvilinear with Dimple (R-Type)	Curvilinear Circula (S-Type)	Curvilinear with Dimple (R-Type)	Circular Round (H-Type)	Curvilinear Circular (GT2-Type)
Backlash		Medium				Medium	Low	Low*		Low*		Very Low	Very Low
Endless Belt		check				check		check		check		check	check
Open End Belt		-	check			check		check (selected pitches)		-		-	check
Belt Material (Tension Cord)		Rubber (Glass Fiber)			-	Polyurethane (Steel Cord)		Chloroprene Rubber (Glass Fiber)		Chloroprene Rubber (Glass Fiber)	Rubber (Glass Fiber)	Chloroprene Rubber (Glass Fiber)	Neoprene Rubber (Glass Fiber)
Belt Material (Tension Cord)		Polyurethane (Kevlar/Steel Cord)				Polyurethane (Steel Cord)		Polyurethane(Aramid Fiber) (S2M,S3M,S5M only)		Chloroprene Rubber (Glass Fiber)	Rubber (Glass Fiber)	Chloroprene Rubber (Glass Fiber)	Neoprene Rubber (Glass Fiber)
Typical Applications	Conveying	check				check	check	-	-	-	-	-	check
	Positioning	-				-	check	check	check	check	check	check	check
	Power Transmission	-				-	-	check	check	check	check	check	check
	High Speed	check				check	-	check	check	check	check	check	check

*MISUMI offers Special Zero Backlash S8M pulleys (For use with S-Type belts only)

Filter by Type

Timing Pulleys
Timing Pulley Bar Stock
Keyless Pulley
Idlers with Teeth
Idlers

29 items

Hide Filters XFilter Results

Activating the following links will update the content below

XL Timing Belt Pulley - Metric or Inch Bore

MISUMI

0.200" Pitch, General use Trapezoidal tooth profile often used in conveying or high speed applications.

Clean processed version also available, please click Here.

Volume Discount Available

Lead Time Reduction

Available in INCH

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S5M Timing Belt Pulley - High Torque

MISUMI

5mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.

Clean processed version also available, please click Here.

Volume Discount Available

Lead Time Reduction

Available in INCH

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S3M Timing Belt Pulley - High Torque

MISUMI

3mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.

Clean processed version also available, please click Here.

Volume Discount Available

Lead Time Reduction

Available in INCH

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
Backside Tension Timing Idler Pulley - Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days

Stock Items Included
MXL Timing Belt Pulley - Metric or Inch Bore

MISUMI

0.800" Pitch, General use Trapezoidal tooth profile often used in conveying or high speed applications.

Clean processed version also available, please click Here.

Volume Discount Available

Lead Time Reduction

Available in INCH

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S2M Timing Belt Pulley - High Torque

MISUMI

2mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.

Clean processed version also available, please click Here.

Volume Discount Available

Lead Time Reduction

Available in INCH

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
T5, T10 Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days

Stock Items Included
MXL, XL Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S5M, S8M Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days

Stock Items Included
S3M Timing Belt Pulley - High Torque, Standard Keyless Bushing

MISUMI

3mm pitch. MechaLock Standard Type incorporated Timing Pulley with centering function. For High torque applications, curvilinear circular S-Type tooth profile.

Clean processed version also available, please click Here.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S5M, S8M, S14M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
MXL, XL Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days

Stock Items Included
S2M, S3M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days

Stock Items Included
L, H Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
T5, T10 Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] XL Timing Belt Pulley

MISUMI

0.200" Pitch, General use Trapezoidal tooth profile often used in conveying or high speed applications.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
S5M Timing Belt Pulley - High Torque, Standard Keyless Bushing

MISUMI

5mm pitch. MechaLock Standard Type incorporated Timing Pulley with centering function. For High torque applications, curvilinear circular S-Type tooth profile.

Clean processed version also available, please click Here.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S2M, S3M Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
L, H Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days

Stock Items Included
[Clean & Pack] Keyless High Torque Timing Pulley - S3M, MechaLock Standard Built-in

MISUMI

3mm pitch. MechaLock Standard Type incorporated Timing Pulley with centering function. For High torque applications, curvilinear circular S-Type tooth profile.

Volume Discount Available

CAD Available in 2D and 3D
Configure Now

Ships as soon as 5 Days
[Clean & Pack] MXL Timing Belt Pulley

MISUMI

0.08" Pitch, General use Trapezoidal tooth profile often used in conveying or high speed applications.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] S5M Timing Belt Pulley

MISUMI

5mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] S3M Timing Belt Pulley

MISUMI

3mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] S2M Timing Belt Pulley

MISUMI

2mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
P5M, P8M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
P2M, P3M, P5M, P8M Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] Keyless High Torque Timing Pulley - S5M, MechaLock Standard Built-in

MISUMI

5mm pitch. MechaLock Standard Type incorporated Timing Pulley with centering function. For High torque applications, curvilinear circular S-Type tooth profile.

Volume Discount Available

CAD Available in 2D and 3D
Configure Now

Ships as soon as 5 Days


Brand
Product Series
CAD
Days to Ship
Specifications
Type
Belt Shape
Belt Width (in)
Belt Width (mm)
Number of Teeth(T)
Pulley Shape
Material
Surface Treatment
Cleaning Method
RoHS Compliance

	Lead Time Reduction	Lead Time Reduction	Lead Time Reduction	Spec Change	Lead Time Reduction	Lead Time Reduction		Spec Change	Spec Change		Spec Change	Spec Change	Spec Change	Spec Change		Spec Change			Spec Change	Spec Change						Spec Change	Spec Change	Spec Change
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	XL Timing Belt Pulley - Metric or Inch Bore	S5M Timing Belt Pulley - High Torque	S3M Timing Belt Pulley - High Torque	Backside Tension Timing Idler Pulley - Center Bearing	MXL Timing Belt Pulley - Metric or Inch Bore	S2M Timing Belt Pulley - High Torque	T5, T10 Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	MXL, XL Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	S5M, S8M Flanged Timing Idler Pulleys - Teeth, Center Bearing	S3M Timing Belt Pulley - High Torque, Standard Keyless Bushing	S5M, S8M, S14M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	MXL, XL Flanged Timing Idler Pulleys - Teeth, Center Bearing	S2M, S3M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	L, H Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	T5, T10 Flanged Timing Idler Pulleys - Teeth, Center Bearing	[Clean & Pack] XL Timing Belt Pulley	S5M Timing Belt Pulley - High Torque, Standard Keyless Bushing	S2M, S3M Flanged Timing Idler Pulleys - Teeth, Center Bearing	L, H Flanged Timing Idler Pulleys - Teeth, Center Bearing	[Clean & Pack] Keyless High Torque Timing Pulley - S3M, MechaLock Standard Built-in	[Clean & Pack] MXL Timing Belt Pulley	[Clean & Pack] S5M Timing Belt Pulley	[Clean & Pack] S3M Timing Belt Pulley	[Clean & Pack] S2M Timing Belt Pulley	P5M, P8M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Center Bearing	P2M, P3M, P5M, P8M Flanged Timing Idler Pulleys - Teeth, Center Bearing	[Clean & Pack] Keyless High Torque Timing Pulley - S5M, MechaLock Standard Built-in
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Days to Ship	7 Days	7 Days	7 Days	7 Days Stock Items Included	7 Days	7 Days	7 Days Stock Items Included	7 Days	7 Days Stock Items Included	7 Days	7 Days	7 Days Stock Items Included	7 Days	7 Days Stock Items Included	7 Days	7 Days	5 Days	7 Days	7 Days	7 Days Stock Items Included	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	5 Days
Specifications	Available in INCH Rapid Design	Available in INCH Rapid Design	Available in INCH Rapid Design	Rapid Design	Available in INCH Rapid Design	Available in INCH Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design		Rapid Design	Rapid Design	Rapid Design						Rapid Design	Rapid Design	Rapid Design
Type	Timing Pulleys	Timing Pulleys	Timing Pulleys	Idlers	Timing Pulleys	Timing Pulleys	Idlers with Teeth	Idlers with Teeth	Idlers with Teeth	Keyless Pulley	Idlers with Teeth	Idlers with Teeth	Idlers with Teeth	Idlers with Teeth	Idlers with Teeth	Idlers with Teeth	Timing Pulleys	Keyless Pulley	Idlers with Teeth	Idlers with Teeth	Keyless Pulley	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Idlers with Teeth	Idlers with Teeth	Idlers with Teeth	Keyless Pulley
Belt Shape	XL	S5M	S3M	-	MXL	S2M	T5 ～ T10	MXL ～ XL	S5M ～ S8M	S3M	S5M ～ S8M	MXL ～ XL	S2M ～ S3M	AT5 ～ AT10	H ～ L	T5 ～ T10	XL	S5M	S2M ～ S3M	H ～ L	S3M	MXL	S5M	S3M	S2M	P5M ～ P8M	AT5 ～ AT10	P2M ～ P8M	S5M
Belt Width (in)	0.25 in (1/4") ～ 0.50 in (1/2")	-	-	0.25 in (1/4") ～ 0.75 in (3/4")	0.25 in (1/4") ～ 0.37 in (3/8")	-	-	0.13 (1/8") ～ 0.50 in (1/2")	-	-	-	0.13 in (1/8") ～ 0.50 in (1/2")	-	-	0.50 in (1/2") ～ 1.00 in (1")	-	0.25 in (1/4") ～ 0.50 in (1/2")	-	-	0.50 in (1/2") ～ 1.00 in (1")	-	0.25 in (1/4") ～ 0.37 in (3/8")	-	-	-	-	-	-	-
Belt Width (mm)	6.4 ～ 12.7	10 ～ 15	6 ～ 10	4 ～ 19.1	6.4 ～ 9.5	4 ～ 6	10 ～ 30	3.3 ～ 12.7	10 ～ 30	10	10 ～ 30	3.3 ～ 12.7	4 ～ 15	10 ～ 25	12.7 ～ 25.4	10 ～ 25	6.4 ～ 12.7	10 ～ 15	4 ～ 15	12.7 ～ 25.4	10	6.4 ～ 9.5	10 ～ 15	6 ～ 10	4 ～ 6	10 ～ 25	10 ～ 25	6 ～ 25	10 ～ 15
Number of Teeth(T)	10 ～ 72	14 ～ 72	14 ～ 72	-	14 ～ 72	14 ～ 72	14 ～ 32	10 ～ 60	18 ～ 44	40 ～ 72	18 ～ 44	18 ～ 60	20 ～ 60	14 ～ 36	12 ～ 30	14 ～ 30	10 ～ 72	24 ～ 72	20 ～ 60	12 ～ 30	40 ～ 72	14 ～ 72	14 ～ 72	14 ～ 72	14 ～ 72	20 ～ 36	16 ～ 36	20 ～ 40	24 ～ 72
Pulley Shape	Shape A / Shape B	Shape A / Shape B	Shape A / Shape B / C Type	-	Shape A / Shape B / C Type	Shape A / Shape B / C Type	-	-	-	Shape E	-	-	-	-	-	-	Shape A / Shape B	Shape E / Shape F	-	-	Shape E	Shape A / Shape B / C Type	Shape A / Shape B	Shape A / Shape B / C Type	Shape A / Shape B / C Type	-	-	-	Shape E / Shape F
Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Surface Treatment	Electroless Nickel Plating ～ Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Cleaning Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Degreasing / Precision Cleaning	-	-	-	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	-	-	-	Degreasing / Precision Cleaning
RoHS Compliance	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Configure

Filters

Belt Shape
1.5GT

2GT

P2M

S2M

MR2 (for PowerGrip® GT®3)

T2.5

3GT

P3M

S3M

MR3 (for PowerGrip® GT®3)

5GT

AT5

P5M

S5M

T5

MR5 (for PowerGrip® GT®3)

8YU

P8M

S8M

AT10

T10

S14M

H

L

MXL

XL
Details

Clear

Metric / Inch
- metric
- inch
Clear

Belt Width Used
Belt Width (in)
0.13

0.13 (1/8")

0.13 in (1/8")

0.19

0.19 in (3/16")

0.25

0.25 in (1/4")

0.31

0.31 in (5/16")

0.37

0.37 in (3/8")

0.5

0.50 in (1/2")

0.75

0.75 in (3/4")

1

1.00 in (1")

1.5

1.50 in (1-1/2")

2

2.00 in (2")

3

3.00 in (3")
Clear
Belt Width Used
Belt Width (mm)
3.2

3.3

4

4.8

5

6

6.4

7

7.9

9

9.5

10

12

12.7

15

18

19.1

20

25

25.4

26

28

30

31

38.1

40

50

50.8

60

76.2

100
Clear

Number of Teeth(T)
10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

62

64

68

72
Clear

Pulley Shape
- Shape A
- Shape B
- C Type
- W Type
- Shape E
- Shape F
Images

Clear

Material
Aluminum

Resin

Stainless Steel

Steel
Clear

Surface Treatment
Black Anodize

Black Oxide Coating

Clear Anodize

Electroless Nickel Plating

Hard Clear Anodize

Not Provided
Clear

Cleaning Method
- Degreasing
- Precision Cleaning
Clear

RoHS Compliance
- RoHS Compliant (10 Substances)
Clear

Brand

- MISUMI (29)
- C-Value ()
- Mitsuboshi Belting (0)
Clear

CAD

- 2D
- 3D
Clear

Days to Ship

All

Same Day

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less

12 Days or Less
Clear

Application example related to this category

back next

Related Categories to Timing Pulleys & Idlers

- Timing Belts
- Timing Pulleys & Idlers

Timing Pulleys & Idlers（Material：Stainless Steel）

Filter by Type

Configure

Filters

Belt Shape

Metric / Inch

Belt Width Used

Belt Width (in)

Belt Width Used

Belt Width (mm)

Number of Teeth(T)

Pulley Shape

Material

Surface Treatment

Cleaning Method

RoHS Compliance

Brand

CAD

Days to Ship

Application example related to this category

Related Categories to Timing Pulleys & Idlers