Empowering Engineers with

Configurable Components

Our business hours: Mon. - Fri. 7 a.m. - 9 p.m. ET | Sat. 8 a.m - 5 p.m. ET.

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List
inCAD Library
inCAD Library

Please read before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. Misumi reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

inCAD Library Features

  1. Get great new design ideas for these application examples.
  2. Over 300 design application ideas
    collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Page top

Keyword Search
No. Search
SNS: 

No.000142 Stroke Lift Device

Lifting device utilizing two cylinders

Relevant category

Sensor Target

Product name Switch Flags - Setscrew, One Ends Cone with Thru Hole
Part number DGSM40-16-30
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable as a Target Sensor Flag for Limit Switch

Back to page top

Available sizes

■Sensor Flag for Limit Switch, Set Screw Type

Shape Shaft Bore Material Surface Treatment Accessory
One End Cone Type Through Hole 1045 Carbon Steel Black Oxide Set screw 2pcs.
Both Ends Cone Type
One End Cone Type Tapped hole Set Screw 2 pcs.
Brass Ball 2 pcs.
Both Ends Cone Type

■Sizes and Dimensions

Shape Shaft Bore Type Shaft bore Dia. O.D. Inclination Angle Overall thickness
One End Cone Type Through Hole φ10 φ30 45° 22
φ12・φ16 φ40 30°・45° 24
φ50 28
Both Ends Cone Type φ10 φ30 45° 30
φ12・φ16 φ40 30°・45° 34
φ50 42
One End Cone Type Tapped hole M10 φ30 45° 22
M12・M16 φ40 30°・45° 24
φ50 28
Both Ends Cone Type M10 φ30 45° 30
M12・M16 φ40 30°・45° 34
φ50 42

Back to page top

Shaft

Product name Precision Linear Shafts - One End Threaded with Undercut and Wrench Flat -Precision Type
Part number PSSAGS16-535-F15-M12-SC10
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable as a stroke part for elevating mechanism

Back to page top

Available sizes

■Shaft (One End Threaded with Undercut, with Wrench Flats)

Material Hardness Surface Treatment O.D. Tolerance
g6 h5 f8
52100 Bearing Steel Induction hardened 58HRC〜
440C Stainless Steel Induction hardened 56HRC〜
52100 Bearing Steel Induction hardened 58HRC〜 Hard chrome plating
Plating hardness HV750~
Plating thickness 5μ or more
440C Stainless Steel Induction hardened 56HRC〜
52100 Bearing Steel Induction hardened 58HRC〜 Low Temp. Black Chrome Plating
1045 Carbon Steel Hard chrome plating
Plating hardness HV750~
Plating thickness 10μ or more
304 Stainless Steel

■Sizes

O.D. Tolerance Shaft Dia. Screw Dia. (Coarse) Shaft Length Thread Length Max.
Full Length
Wrench Flats
M6 M8 M10 M12 M16 M20 M24
g6

h5

f8
φ8 - - - - - - 25〜795 5
-
Screw Dia. x 3
800 7
φ10 - - - - - 8
φ12 - - - - 25〜995 1000 10
φ13 - - - 11
φ15 - - - 13
φ16 - - - 25〜1195 1200 14
φ18 - - 16
φ20 - - 17
φ25 - 22
φ30 - 25〜1495 1500 27

Back to page top

Accuracy Info

■O.D. tolerance table

Shaft Dia. O.D. Tolerance
g6 h5 f8
φ8 -0.005
-0.014
 0
-0.006
-0.013
-0.035
φ10
φ12 -0.006
-0.017
 0
-0.008
-0.016
-0.043
φ13
φ15
φ16
φ18
φ20 -0.007
-0.020
 0
-0.009
-0.020
-0.053
φ25
φ30

Back to page top

Shock Absorbers

Product name Shock Absorbers - Preset Dampening
Part number MAKC1612M
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable for shock absorbing parts that can be easily secured.

Back to page top

Available sizes

■Shock Absorbers (Fixed)

Collision Speed Type Impact Speed Range Maximum use cycle
Low Speed 0.3〜1m/s 60cycle/min *
Medium Speed 0.3〜2m/s
High Speed 0.3〜3m/s

* 45 cycle/min for No. 0404, 0604, and 0805, 30 cycle/min for No. 3035

■Specifications / Sizes and Dimensions

(Name No.) Cap Body material Surface Treatment Speed Thread Dia.
x Pitch
Stroke Overall Length Thread
Length
Cap
Dia.
Rod
Dia.
Cap
Height
With Cap Without Cap
404 With and without 303 Stainless Steel - Low speed 1 M4×0.5 4 32.6 28.6 19.6 φ3 φ1.2 4
Low speed 2
604 Low speed 1 M6×0.75 33 29 20 φ4.6 φ1.8
Low speed 2
Low speed 3
805 C36000 Brass Electroless
Nickel Plating
Low speed 1 M8×0.75 5 37 32 20.5 φ6 φ2 5
Low speed 2
1005 Carbon Steel Low speed 1 M10×1 39 φ3 7
Low speed 2
1008 Low speed 1 8 53 46 31.5
Low speed 2
Low speed 3 55 48 33
Medium Speed
High Speed
1210 Low speed 1 M12×1 10 68 60 43.5 φ8 φ3.5 8
Low speed 2
Low speed 3 71 63 47.5
Medium Speed
High Speed
1412 Low speed 3 M14×1.5 12 78 70 52.5 φ10
Medium Speed
High Speed
1612 Low speed 3 M16×1.5 12 90 75 57.5 φ13.5 φ5 15
Medium Speed
High Speed
2016 Low speed 3 M20×1.5 16 110 93 63 φ18 φ6 17
Medium Speed
High Speed
2022 A570.36 Pipe Steel Low speed 3 22 126.5 112 76 14.5
Medium Speed
High Speed
2530 Low speed 3 M25×1.5 30 158 140 95 φ22 φ8 18
Medium Speed
High Speed
2725 Low speed 3 M27×1.5 25 137.5 117.5 77.5 φ23 20
Medium Speed
High Speed
3035 Low speed 3 M30×1.5 35 190 171.5 116.5 φ27 φ10 18.5
Medium Speed
High Speed

Back to page top

Selection steps

■Shock Absorbers Selection Steps

(1) Calculate the inertia energy (E1)

Calculate the energy based on the collision material mass (m), collision velocity (V), moment of inertia (I) and collision angle velocity (Ω).
Please see the technical information for details.

(2) Temporarily select the absorber stroke

Determine the temporary stroke (S') according to the figure below.

(3) Calculate the additional energy (E2')

Verify the existence of thrust force (F) and calculate the additional energy according to the selection calculation example.

(4) Calculate the total energy

Calculate the total energy by adding inertia energy (E1) and addition energy (E2') together.

(5) Check the equivalent mass

Calculate the equivalent mass according to the selection calculation example to check if it is less than or equal to the maximum equivalent mass (me') shown in the catalog.

(6) Select the absorption property structure from the energy ratio.

Temporarily select the orifice type according to the figure below.

Back to page top

Performance info.

■Load Info. of Shock Absorbers

(Name No.) Speed Max. Absorption Energy(E’) Max. Equivalent
Mass
Piston
Rod
Restoring Force
Max.
Drag Value
Each Time Per Minute (me’)
(J) (J) (kg) (N) (N)
404 Low speed 1 0.1 4.5 1 2.5 or less 214
Low speed 2 0.3 13.5 3
604 Low speed 1 0.1 4.5 1 3 or less 363
Low speed 2 0.3 13.5 2
Low speed 3 0.5 22.5 3
805 Low speed 1 0.39 17.6 3 4.9 or less 490
Low speed 2 0.68 22.5 5 588
1005 Low speed 1 41.1 5.88 or less 735
Low speed 2 0.98 8
1008 Low speed 1 58.8 7 5.88 or less
Low speed 2 1.47 10
Low speed 3 2.94 20 4.9 or less 1078
Medium Speed 6
High Speed 2.5
1210 Low speed 1 1.96 98 15 9.8 or less 1470
Low speed 2 2.45 30
Low speed 3 6.86 50 1960
Medium Speed 14
High Speed 6
1412 Low speed 3 9.8 176 75 8.9 or less 2156
Medium Speed 20
High Speed 8
1612 Low speed 3 14.7 235 110 9.8 or less 2940
Medium Speed 30
High Speed 13
2016 Low speed 3 29.4 343 230 18.1 or less 3528
Medium Speed 60
High Speed 25
2022 Low speed 3 44.1 392 73 39.2 or less 3920
Medium Speed 30
High Speed 15
2530 Low speed 3 88.2 490 390 29.4 or less 6370
Medium Speed 175
High Speed 75
2725 Low speed 3 79 539 420 27.3 or less 6370
Medium Speed 105
High Speed 47
3035 Low speed 3 196 1176 1560 47.1 or less 14700
Medium Speed 390
High Speed 173

Back to page top

IDEA NOTE Dual-stage changeover of lift stroke

Two cylinders enable dual-stage changeover.

IDEA NOTE Transfer of device

To facilitate transfer of the device body, swivel type casters are provided at the bottom of the base.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The dimensions of the MISUMI parts in the Data, which can be specifed at 1mm intervals, can be edited under historical data.
    6. The Data including the third-part components are made by the Company.

    Page top

  • * Unit assembly Data consists of some sub-assemblies.
       It is configured so that each sub-assembly unit can be used as it is or edited.

Application Overview

Purpose

  • Purpose
    • Provide dual positions lifting mechanism.
  • Operation
    • Machine is assumed to be manually operated in the raising, lowering, and removing of the workpiece.

Points for use

  • Allows manual operation in factory and suitable for small-lot production.

Target workpiece

  • Shape: container bottle
  • Size:φ64xH160mm
  • Weight:100g

Design Specifications

Operating Conditions or Design Requirements

  • Outer dimensions: W460 x D412 x H808mm
    Operation:
    Dual-stage stroke changeover with a table lift distance of 100 + 100mm
    For container height of up to 200mm, only the upper cylinder strokes for 100mm.
    For container height of up to 300mm, the lower cylinder also strokes for 100mm (however, the stroke length is changed according to the counterpart machine). 

Required Performance

  • Positioning accuracy:±3mm
    Load: 50N

Selection Criteria for Main Components

  • For the 1st lift unit, φ50 air cylinder is selected to lift 546N load.
    For the 2nd lift unit, φ40 air cylinder is selected to lift 350N load.

Design Evaluation

Verification of main components

  • The cylinder thrust is verified to see whether the lifting power requirement is satisfied.
    • 1st lift unit: fromφ50 air cylinder and air pressure of 0.4MPa producing 780N × 0.7 (mechanical efficiency) = 546N,
      and lift unit weight of 160N (including φ40 cylinder), there is no problem.
      2nd lift unit: fromφ40 air cylinder and air pressure of 0.4MPa producing 500N × 0.7 (mechanical efficiency) = 350N,
      and lift unit weight of 80N, there is no problem.

Other Design Consideration

  • Uses two stages of lift stroke depending on the height of the container.
  • Equipped with shock absorbers as a safety measure against malfunction during full-stroke lift.
  • Equipped with cylinder-mounted switch to detect full stroke.
  • Equipped with limit switches to facilitate height adjustment for a variety of bottles.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample Picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Casters CSTUN75B-R 4
2 Switch Flags DGSM40-16-30 2
3 Aluminum Extrusion HFS6-3030-400 1
4 Hex Socket Cap Screws For Aluminum Extrusion HNTR6-6 6
5 Linear Shaft PSSAGS16-535-F15-M12-SC10 2
6 Shock Absorbers MAKC1612M 1
7 Stopper for Shock Absorber STNC16 1
8 Cross Recesed Flat Head Screw TRSS5-10 24
  • The part list above only contains MISUMI parts.
    Part list download (CSV) includes MISUMI and third party components used in this example.
  • For price and shipping date see the Web Order System.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The dimensions of the MISUMI parts in the Data, which can be specifed at 1mm intervals, can be edited under historical data.
    6. The Data including the third-part components are made by the Company.

    Page top

Page top