Shaped Pilot Punches for Fixing to Stripper Plates (Part Numbers)

Shaped Pilot Punches for Fixing to Stripper Plates

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
A-TPDP2.0-[12-32/0.1]-P[0.3-1.95/0.01]-W[0.3-1.95/0.01]-A[5,​10,​15]
A-TPDP2.5-[12-32/0.1]-P[0.5-2.45/0.01]-W[0.5-2.45/0.01]-A[5,​10,​15]
A-TPDP3-[12-32/0.1]-P[0.7-2.95/0.01]-W[0.7-2.95/0.01]-A[5,​10,​15]
A-TPDP4-[12-32/0.1]-P[1-3.95/0.01]-W[1-3.95/0.01]-A[5,​10,​15]
A-TPEP2.0-[12-32/0.1]-P[0.3-1.95/0.01]-W[0.3-1.95/0.01]-A[5,​10,​15]
A-TPEP2.5-[12-32/0.1]-P[0.5-2.45/0.01]-W[0.5-2.45/0.01]-A[5,​10,​15]
A-TPEP3-[12-32/0.1]-P[0.7-2.95/0.01]-W[0.7-2.95/0.01]-A[5,​10,​15]
A-TPEP4-[12-32/0.1]-P[1-3.95/0.01]-W[1-3.95/0.01]-A[5,​10,​15]
TPDP2.0-[12-32/0.1]-P[0.3-1.95/0.01]-W[0.3-1.95/0.001]-A[5,​10,​15]
TPDP2.5-[12-32/0.1]-P[0.5-2.45/0.001]-W[0.5-2.45/0.001]-A[5,​10,​15]
TPDP3-[12-32/0.1]-P[0.7-2.95/0.001]-W[0.7-2.95/0.001]-A[5,​10,​15]
TPDP4-[12-32/0.1]-P[1-3.95/0.001]-W[1-3.95/0.001]-A[5,​10,​15]
TPEP2.0-[12-32/0.1]-P[0.3-1.95/0.01]-W[0.3-1.95/0.01]-A[5,​10,​15]
TPEP2.5-[12-32/0.1]-P[0.5-2.45/0.01]-W[0.5-2.45/0.01]-A[5,​10,​15]
TPEP3-[12-32/0.1]-P[0.7-2.95/0.01]-W[0.7-2.95/0.01]-A[5,​10,​15]
TPEP4-[12-32/0.1]-P[1-3.95/0.01]-W[1-3.95/0.01]-A[5,​10,​15]
Part NumberVolume DiscountDays to Ship RoHSShank diameter D tolerance Tip shape D (Shank diameter)
(mm)
A (Taper angle)
(°)
L (L dimension)
(mm)
P (Tip dimension)
(mm)
W (Tip dimension)
(mm)

5 Days or more

Compliant+0.005/0D2.05 ~ 1512 ~ 320.3 ~ 1.950.3 ~ 1.95

5 Days or more

Compliant+0.005/0D2.55 ~ 1512 ~ 320.5 ~ 2.450.5 ~ 2.45

5 Days or more

Compliant+0.005/0D35 ~ 1512 ~ 320.7 ~ 2.950.7 ~ 2.95

5 Days or more

Compliant+0.005/0D45 ~ 1512 ~ 321 ~ 3.951 ~ 3.95

5 Days or more

Compliant+0.005/0E2.05 ~ 1512 ~ 320.3 ~ 1.950.3 ~ 1.95

5 Days or more

Compliant+0.005/0E2.55 ~ 1512 ~ 320.5 ~ 2.450.5 ~ 2.45

5 Days or more

Compliant+0.005/0E35 ~ 1512 ~ 320.7 ~ 2.950.7 ~ 2.95

5 Days or more

Compliant+0.005/0E45 ~ 1512 ~ 321 ~ 3.951 ~ 3.95

5 Days or more

Compliantm5D2.05 ~ 1512 ~ 320.3 ~ 1.950.3 ~ 1.95

5 Days or more

Compliantm5D2.55 ~ 1512 ~ 320.5 ~ 2.450.5 ~ 2.45

5 Days or more

Compliantm5D35 ~ 1512 ~ 320.7 ~ 2.950.7 ~ 2.95

5 Days or more

Compliantm5D45 ~ 1512 ~ 321 ~ 3.951 ~ 3.95

5 Days or more

Compliantm5E2.05 ~ 1512 ~ 320.3 ~ 1.950.3 ~ 1.95

5 Days or more

Compliantm5E2.55 ~ 1512 ~ 320.5 ~ 2.450.5 ~ 2.45

5 Days or more

Compliantm5E35 ~ 1512 ~ 320.7 ~ 2.950.7 ~ 2.95

5 Days or more

Compliantm5E45 ~ 1512 ~ 321 ~ 3.951 ~ 3.95

Loading...

  1. 1

Basic Information

Shank type Standard Tip shape Tapered tip deformation Material SKD11 Equivalen
Surface treatment None Mounting plate Stripper plate Shank (mounting part) shape Standard

Additional Products in this Category

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET