Carbide Straight Pilot Punches for Fixing to Stripper Plates -Sharp Tip Angle Type - TiCN Coating (Part Numbers)

Carbide Straight Pilot Punches for Fixing to Stripper Plates  -Sharp Tip Angle Type - TiCN Coating

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
H-WAPT1.6-[10-32/0.1]-P[1-1.6/0.01]-A[10,​15,​20,​25,​30]
H-WAPT1.6-[10-32/0.1]-P[1-1.6/0.01]-AC[16-45/1]
H-WAPT2.0-[10-32/0.1]-P[1-2/0.01]-A[10,​15,​20,​25,​30]
H-WAPT2.0-[10-32/0.1]-P[1-2/0.01]-AC[16-45/1]
H-WAPT2.5-[10-32/0.1]-P[1.5-2.5/0.01]-A[10,​15,​20,​25,​30]
H-WAPT2.5-[10-32/0.1]-P[1.5-2.5/0.01]-AC[16-45/1]
H-WAPT3-[10-40/0.1]-P[2-3/0.01]-A[15,​20,​25,​30]
H-WAPT3-[10-40/0.1]-P[2-3/0.01]-AC[16-45/1]
H-WAPT4-[10-40/0.1]-P[3-4/0.01]-A[15,​20,​25,​30]
H-WAPT4-[10-40/0.1]-P[3-4/0.01]-AC[16-45/1]
H-WAPT5-[10-40/0.1]-P[4-5/0.01]-A[15,​20,​25,​30]
H-WAPT5-[10-40/0.1]-P[4-5/0.01]-AC[16-45/1]
H-WAPT6-[10-40/0.1]-P[5-6/0.01]-A[15,​20,​25,​30]
H-WAPT6-[10-40/0.1]-P[5-6/0.01]-AC[16-45/1]
Part NumberVolume DiscountDays to Ship RoHSNo. (Nominal diameter)
(mm)
A (Taper angle)
(°)
L (L dimension)
(mm)
P (Tip dimension)
(mm)
Tip angle change [AC]
(°)

7 Days or more

Compliant1.610 ~ 3010 ~ 321 ~ 1.6-

7 Days or more

Compliant1.6-10 ~ 321 ~ 1.616 ~ 45

7 Days or more

Compliant2.010 ~ 3010 ~ 321 ~ 2-

7 Days or more

Compliant2.0-10 ~ 321 ~ 216 ~ 45

7 Days or more

Compliant2.510 ~ 3010 ~ 321.5 ~ 2.5-

7 Days or more

Compliant2.5-10 ~ 321.5 ~ 2.516 ~ 45

7 Days or more

Compliant315 ~ 3010 ~ 402 ~ 3-

7 Days or more

Compliant3-10 ~ 402 ~ 316 ~ 45

7 Days or more

Compliant415 ~ 3010 ~ 403 ~ 4-

7 Days or more

Compliant4-10 ~ 403 ~ 416 ~ 45

7 Days or more

Compliant515 ~ 3010 ~ 404 ~ 5-

7 Days or more

Compliant5-10 ~ 404 ~ 516 ~ 45

7 Days or more

Compliant615 ~ 3010 ~ 405 ~ 6-

7 Days or more

Compliant6-10 ~ 405 ~ 616 ~ 45

Loading...

  1. 1

Basic Information

Shank type Straight Tip shape Sharp tip angle Material Carbide V30 (HIP)
Surface treatment TiCN Mounting plate Stripper plate Shank (mounting part) shape Standard

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET