Carbide Straight Pilot Punches for Fixing to Stripper Plates Tip R and Taper Combined Type, Minus Head tolerance, Normal, Lapping, TiCN Coating

Part Number

Configured Part Number is shown.

 
Part Number
H-WSPTF1.6-[10-32/0.1]-P[1-1.6/0.01]
H-WSPTF2.0-[10-32/0.1]-P[1-2/0.01]
H-WSPTF2.5-[10-32/0.1]-P[1-2.5/0.01]
H-WSPTF3-[10-40/0.1]-P[1-3/0.01]
L-WSPTF1.6-[10-32/0.1]-P[0.8-1.6/0.001]
L-WSPTF2.0-[10-32/0.1]-P[1-2/0.001]
L-WSPTF2.5-[10-32/0.1]-P[1-2.5/0.001]
L-WSPTF3-[10-40/0.1]-P[1-3/0.001]
WSPTF1.6-[10-32/0.1]-P[0.8-1.6/0.001]
WSPTF2.0-[10-32/0.1]-P[1-2/0.001]
WSPTF2.5-[10-32/0.1]-P[1-2.5/0.001]
WSPTF3-[10-40/0.1]-P[1-3/0.001]
Part NumberVolume DiscountDays to Ship RoHSSurface treatment No. (Nominal diameter)
(mm)
L (L dimension)
(mm)
P (Tip dimension)
(mm)

10 Days or more

CompliantTiCN1.610 ~ 321 ~ 1.6

10 Days or more

CompliantTiCN2.010 ~ 321 ~ 2

10 Days or more

CompliantTiCN2.510 ~ 321 ~ 2.5

10 Days or more

CompliantTiCN310 ~ 401 ~ 3

5 Days or more

CompliantLapping1.610 ~ 320.8 ~ 1.6

5 Days or more

CompliantLapping2.010 ~ 321 ~ 2

5 Days or more

CompliantLapping2.510 ~ 321 ~ 2.5

5 Days or more

CompliantLapping310 ~ 401 ~ 3

5 Days or more

CompliantNone1.610 ~ 320.8 ~ 1.6

5 Days or more

CompliantNone2.010 ~ 321 ~ 2

5 Days or more

CompliantNone2.510 ~ 321 ~ 2.5

5 Days or more

CompliantNone310 ~ 401 ~ 3

Loading...

  1. 1

Basic Information

Shank type Straight Tip shape Tip R & taper Material Carbide V30 (HIP)
Mounting plate Stripper plate Shank (mounting part) shape Standard

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET