Carbide Straight Block Punches

Carbide Straight Block Punches

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
ZFCD-[40-70/10]-P[2-16/0.01]-W[2-16/0.01]-F[0,​90]
ZFCD-LC[20-69.9/0.1]-P[2-16/0.01]-W[2-16/0.01]-F[0,​90]
ZFCE-[40-70/10]-P[2-16/0.01]-W[2-16/0.01]-F0
ZFCE-LC[20-69.9/0.1]-P[2-16/0.01]-W[2-16/0.01]-F0
ZFCR-[40-70/10]-P[2-16/0.01]-W[2-16/0.01]-R[0.15-9.99/0.01]-F[0,​90]
ZFCR-LC[20-69.9/0.1]-P[2-16/0.01]-W[2-16/0.01]-R[0.15-9.99/0.01]-F[0,​90]
ZKCD-[40-70/10]-P[2-20/0.01]-W[2-20/0.01]-T[2-65/0.1]-K[0,​90]
ZKCD-LC[20-69.9/0.1]-P[2-20/0.01]-W[2-20/0.01]-T[2-65/0.1]-K[0,​90]
ZKCE-[40-70/10]-P[2-20/0.01]-W[2-20/0.01]-T[2-65/0.1]-K[0,​90]
ZKCE-LC[20-69.9/0.1]-P[2-20/0.01]-W[2-20/0.01]-T[2-65/0.1]-K[0,​90]
ZKCR-[40-70/10]-P[2-20/0.01]-W[2-20/0.01]-R[0.15-10/0.01]-T[2-65/0.1]-K[0,​90]
ZKCR-LC[20-69.9/0.1]-P[2-20/0.01]-W[2-20/0.01]-R[0.15-10/0.01]-T[2-65/0.1]-K[0,​90]
ZMCD-[40-70/10]-P[12-20/0.01]-W[12-20/0.01]
ZMCD-LC[30-69.9/0.1]-P[12-20/0.01]-W[12-20/0.01]
ZMCE-[40-70/10]-P[12-20/0.01]-W[12-20/0.01]
ZMCE-LC[30-69.9/0.1]-P[12-20/0.01]-W[12-20/0.01]
ZMCR-[40-70/10]-P[12-20/0.01]-W[12-20/0.01]-R[0.2-10/0.01]
ZMCR-LC[30-69.9/0.1]-P[12-20/0.01]-W[12-20/0.01]-R[0.2-10/0.01]
ZPCD-[40-70/10]-P[2-20/0.01]-W[2-20/0.01]
ZPCD-LC[20-69.9/0.1]-P[2-20/0.01]-W[2-20/0.01]
ZPCE-[40-70/10]-P[2-20/0.01]-W[2-20/0.01]
ZPCE-LC[20-69.9/0.1]-P[2-20/0.01]-W[2-20/0.01]
ZPCR-[40-70/10]-P[2-20/0.01]-W[2-20/0.01]-R[0.15-10/0.01]
ZPCR-LC[20-69.9/0.1]-P[2-20/0.01]-W[2-20/0.01]-R[0.15-10/0.01]
ZWCD-[40-70/10]-P[2-16/0.01]-W[2-16/0.01]-WF[0,​90]
ZWCD-LC[20-69.9/0.1]-P[2-16/0.01]-W[2-16/0.01]-WF[0,​90]
ZWCE-[40-70/10]-P[2-16/0.01]-W[2-16/0.01]-WF0
ZWCE-LC[20-69.9/0.1]-P[2-16/0.01]-W[2-16/0.01]-WF0
ZWCR-[40-70/10]-P[2-16/0.01]-W[2-16/0.01]-R[0.15-9.99/0.01]-WF[0,​90]
ZWCR-LC[20-69.9/0.1]-P[2-16/0.01]-W[2-16/0.01]-R[0.15-9.99/0.01]-WF[0,​90]
Part NumberVolume DiscountDays to Ship RoHSTip shape Shank (mounting part) shape L (L dimension)
(mm)
F (Flange position designation)
(°)
K (Key groove position designation)
(°)
LC (Full length alteration)
(mm)
P (Tip dimension)
(mm)
R (Tip corner R)
(mm)
T (Key groove position)
(mm)
W (Tip dimension)
(mm)
WF (Flange position designation)
(°)

7 Days or more

6DSingle-flanged40 ~ 700 ~ 90--2 ~ 16--2 ~ 16-

7 Days or more

6DSingle-flanged-0 ~ 90-20 ~ 69.92 ~ 16--2 ~ 16-

7 Days or more

6ESingle-flanged40 ~ 700--2 ~ 16--2 ~ 16-

7 Days or more

6ESingle-flanged-0-20 ~ 69.92 ~ 16--2 ~ 16-

7 Days or more

6RSingle-flanged40 ~ 700 ~ 90--2 ~ 160.15 ~ 9.99-2 ~ 16-

7 Days or more

6RSingle-flanged-0 ~ 90-20 ~ 69.92 ~ 160.15 ~ 9.99-2 ~ 16-

7 Days or more

6DWith key groove40 ~ 70-0 ~ 90-2 ~ 20-2 ~ 652 ~ 20-

7 Days or more

6DWith key groove--0 ~ 9020 ~ 69.92 ~ 20-2 ~ 652 ~ 20-

7 Days or more

6EWith key groove40 ~ 70-0 ~ 90-2 ~ 20-2 ~ 652 ~ 20-

7 Days or more

6EWith key groove--0 ~ 9020 ~ 69.92 ~ 20-2 ~ 652 ~ 20-

7 Days or more

6RWith key groove40 ~ 70-0 ~ 90-2 ~ 200.15 ~ 102 ~ 652 ~ 20-

7 Days or more

6RWith key groove--0 ~ 9020 ~ 69.92 ~ 200.15 ~ 102 ~ 652 ~ 20-

7 Days or more

6DTapped40 ~ 70---12 ~ 20--12 ~ 20-

7 Days or more

6DTapped---30 ~ 69.912 ~ 20--12 ~ 20-

7 Days or more

6ETapped40 ~ 70---12 ~ 20--12 ~ 20-

7 Days or more

6ETapped---30 ~ 69.912 ~ 20--12 ~ 20-

7 Days or more

6RTapped40 ~ 70---12 ~ 200.2 ~ 10-12 ~ 20-

7 Days or more

6RTapped---30 ~ 69.912 ~ 200.2 ~ 10-12 ~ 20-

7 Days or more

6DStandard40 ~ 70---2 ~ 20--2 ~ 20-

7 Days or more

6DStandard---20 ~ 69.92 ~ 20--2 ~ 20-

7 Days or more

6EStandard40 ~ 70---2 ~ 20--2 ~ 20-

7 Days or more

6EStandard---20 ~ 69.92 ~ 20--2 ~ 20-

7 Days or more

6RStandard40 ~ 70---2 ~ 200.15 ~ 10-2 ~ 20-

7 Days or more

6RStandard---20 ~ 69.92 ~ 200.15 ~ 10-2 ~ 20-

7 Days or more

6DDouble-flanged40 ~ 70---2 ~ 16--2 ~ 160 ~ 90

7 Days or more

6DDouble-flanged---20 ~ 69.92 ~ 16--2 ~ 160 ~ 90

7 Days or more

6EDouble-flanged40 ~ 70---2 ~ 16--2 ~ 160

7 Days or more

6EDouble-flanged---20 ~ 69.92 ~ 16--2 ~ 160

7 Days or more

6RDouble-flanged40 ~ 70---2 ~ 160.15 ~ 9.99-2 ~ 160 ~ 90

7 Days or more

6RDouble-flanged---20 ~ 69.92 ~ 160.15 ~ 9.99-2 ~ 160 ~ 90

Loading...

  1. 1

Basic Information

Type Straight With/without air hole W/O Material Carbide V30 (HIP)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET