• MISUMI USA’s online catalog has upgraded to a new version. We hope you enjoy your experience. Click here for login assistance.
    If you have any questions about our site, please contact us.

Flange Stopper Pilot Punches DLC Coating Sharp Tip Angle Type (Part Numbers)

Part Number

Configured Part Number is shown.

 
Part Number
N-PATHAL4-[42,​52]-P[0.5-2/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-6/1]
N-PATHAL4-[42,​52]-P[0.5-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
N-PATHAL4-LC[40-51.9/0.1]-P[0.5-2/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-6/1]
N-PATHAL4-LC[40-51.9/0.1]-P[0.5-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
N-PATHAL4-LCT[40-51.9/0.1]-P[0.5-2/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-6/1]
N-PATHAL4-LCT[40-51.9/0.1]-P[0.5-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
N-PATHAL5-[42,​52]-P[1-3/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-8/1]
N-PATHAL5-[42,​52]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
N-PATHAL5-LC[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-8/1]
N-PATHAL5-LC[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
N-PATHAL5-LCT[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-8/1]
N-PATHAL5-LCT[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
N-PATHAL6-[42,​52,​62]-P[1.5-4/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
N-PATHAL6-[42,​52,​62]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
N-PATHAL6-LC[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
N-PATHAL6-LC[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
N-PATHAL6-LCT[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
N-PATHAL6-LCT[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
N-PATHAL8-[42,​52,​62]-P[2-6/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
N-PATHAL8-[42,​52,​62]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
N-PATHAL8-LC[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
N-PATHAL8-LC[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
N-PATHAL8-LCT[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
N-PATHAL8-LCT[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
NW-PATHAL4-[42,​52]-P[1-2/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-6/1]
NW-PATHAL4-[42,​52]-P[1-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
NW-PATHAL4-LC[40-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-6/1]
NW-PATHAL4-LC[40-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
NW-PATHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-6/1]
NW-PATHAL4-LCT[40-51.9/0.1]-P[1-2/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-6/1]
NW-PATHAL5-[42,​52]-P[1-3/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-8/1]
NW-PATHAL5-[42,​52]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
NW-PATHAL5-LC[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-8/1]
NW-PATHAL5-LC[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
NW-PATHAL5-LCT[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-8/1]
NW-PATHAL5-LCT[40-51.9/0.1]-P[1-3/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-8/1]
NW-PATHAL6-[42,​52,​62]-P[1.5-4/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
NW-PATHAL6-[42,​52,​62]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
NW-PATHAL6-LC[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
NW-PATHAL6-LC[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
NW-PATHAL6-LCT[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
NW-PATHAL6-LCT[40-61.9/0.1]-P[1.5-4/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
NW-PATHAL8-[42,​52,​62]-P[2-6/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
NW-PATHAL8-[42,​52,​62]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
NW-PATHAL8-LC[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
NW-PATHAL8-LC[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
NW-PATHAL8-LCT[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-T[13,​16,​20,​25]-B[2-13/1]
NW-PATHAL8-LCT[40-61.9/0.1]-P[2-6/0.01]-A[10-30/5]-TC[13.1-24.9/0.1]-B[2-13/1]
Part NumberVolume DiscountDays to Ship RoHSSurface treatment D (Shank diameter)
(mm)
A (Taper angle)
(°)
B (Tip length)
(mm)
L (L dimension)
(mm)
LC (Full length alteration)
(mm)
LCT (Head thickness tolerance change + Total length alteration)
(mm)
P (Tip dimension)
(mm)
T (Head length)
(mm)
TC (T dimension alteration)
(mm)

10 Days or more

CompliantWithout DLC foundation410 ~ 302 ~ 642 ~ 52--0.5 ~ 213 ~ 25-

10 Days or more

CompliantWithout DLC foundation410 ~ 302 ~ 642 ~ 52--0.5 ~ 2-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation410 ~ 302 ~ 6-40 ~ 51.9-0.5 ~ 213 ~ 25-

10 Days or more

CompliantWithout DLC foundation410 ~ 302 ~ 6-40 ~ 51.9-0.5 ~ 2-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation410 ~ 302 ~ 6--40 ~ 51.90.5 ~ 213 ~ 25-

10 Days or more

CompliantWithout DLC foundation410 ~ 302 ~ 6--40 ~ 51.90.5 ~ 2-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation510 ~ 302 ~ 842 ~ 52--1 ~ 313 ~ 25-

10 Days or more

CompliantWithout DLC foundation510 ~ 302 ~ 842 ~ 52--1 ~ 3-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation510 ~ 302 ~ 8-40 ~ 51.9-1 ~ 313 ~ 25-

10 Days or more

CompliantWithout DLC foundation510 ~ 302 ~ 8-40 ~ 51.9-1 ~ 3-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation510 ~ 302 ~ 8--40 ~ 51.91 ~ 313 ~ 25-

10 Days or more

CompliantWithout DLC foundation510 ~ 302 ~ 8--40 ~ 51.91 ~ 3-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation610 ~ 302 ~ 1342 ~ 62--1.5 ~ 413 ~ 25-

10 Days or more

CompliantWithout DLC foundation610 ~ 302 ~ 1342 ~ 62--1.5 ~ 4-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation610 ~ 302 ~ 13-40 ~ 61.9-1.5 ~ 413 ~ 25-

10 Days or more

CompliantWithout DLC foundation610 ~ 302 ~ 13-40 ~ 61.9-1.5 ~ 4-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation610 ~ 302 ~ 13--40 ~ 61.91.5 ~ 413 ~ 25-

10 Days or more

CompliantWithout DLC foundation610 ~ 302 ~ 13--40 ~ 61.91.5 ~ 4-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation810 ~ 302 ~ 1342 ~ 62--2 ~ 613 ~ 25-

10 Days or more

CompliantWithout DLC foundation810 ~ 302 ~ 1342 ~ 62--2 ~ 6-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation810 ~ 302 ~ 13-40 ~ 61.9-2 ~ 613 ~ 25-

10 Days or more

CompliantWithout DLC foundation810 ~ 302 ~ 13-40 ~ 61.9-2 ~ 6-13.1 ~ 24.9

10 Days or more

CompliantWithout DLC foundation810 ~ 302 ~ 13--40 ~ 61.92 ~ 613 ~ 25-

10 Days or more

CompliantWithout DLC foundation810 ~ 302 ~ 13--40 ~ 61.92 ~ 6-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC410 ~ 302 ~ 642 ~ 52--1 ~ 213 ~ 25-

10 Days or more

CompliantDLC foundation WPC410 ~ 302 ~ 642 ~ 52--1 ~ 2-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC410 ~ 302 ~ 6-40 ~ 51.9-1 ~ 213 ~ 25-

10 Days or more

CompliantDLC foundation WPC410 ~ 302 ~ 6-40 ~ 51.9-1 ~ 2-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC410 ~ 302 ~ 6--40 ~ 51.91 ~ 213 ~ 25-

10 Days or more

CompliantDLC foundation WPC410 ~ 302 ~ 6--40 ~ 51.91 ~ 2-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC510 ~ 302 ~ 842 ~ 52--1 ~ 313 ~ 25-

10 Days or more

CompliantDLC foundation WPC510 ~ 302 ~ 842 ~ 52--1 ~ 3-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC510 ~ 302 ~ 8-40 ~ 51.9-1 ~ 313 ~ 25-

10 Days or more

CompliantDLC foundation WPC510 ~ 302 ~ 8-40 ~ 51.9-1 ~ 3-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC510 ~ 302 ~ 8--40 ~ 51.91 ~ 313 ~ 25-

10 Days or more

CompliantDLC foundation WPC510 ~ 302 ~ 8--40 ~ 51.91 ~ 3-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC610 ~ 302 ~ 1342 ~ 62--1.5 ~ 413 ~ 25-

10 Days or more

CompliantDLC foundation WPC610 ~ 302 ~ 1342 ~ 62--1.5 ~ 4-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC610 ~ 302 ~ 13-40 ~ 61.9-1.5 ~ 413 ~ 25-

10 Days or more

CompliantDLC foundation WPC610 ~ 302 ~ 13-40 ~ 61.9-1.5 ~ 4-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC610 ~ 302 ~ 13--40 ~ 61.91.5 ~ 413 ~ 25-

10 Days or more

CompliantDLC foundation WPC610 ~ 302 ~ 13--40 ~ 61.91.5 ~ 4-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC810 ~ 302 ~ 1342 ~ 62--2 ~ 613 ~ 25-

10 Days or more

CompliantDLC foundation WPC810 ~ 302 ~ 1342 ~ 62--2 ~ 6-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC810 ~ 302 ~ 13-40 ~ 61.9-2 ~ 613 ~ 25-

10 Days or more

CompliantDLC foundation WPC810 ~ 302 ~ 13-40 ~ 61.9-2 ~ 6-13.1 ~ 24.9

10 Days or more

CompliantDLC foundation WPC810 ~ 302 ~ 13--40 ~ 61.92 ~ 613 ~ 25-

10 Days or more

CompliantDLC foundation WPC810 ~ 302 ~ 13--40 ~ 61.92 ~ 6-13.1 ~ 24.9

Loading...

  1. 1

Basic Information

Shank type Standard Tip shape Sharp tip angle Material Powdered high-speed steel
Mounting plate Punch plate Shank (mounting part) shape Flange stopper Shank diameter D tolerance +0.005/0

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET