Key Flat Shank Tapped Punches -HW Coating- (Part Numbers)

Part Number

Configured Part Number is shown.

 
Part Number
GHW-MPHRS20-[40-100/10]-P[5-19.97/0.01]-W[5-17.8/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-[40-100/10]-P[5-19.97/0.01]-WC[2.5-4.99/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-[40-100/10]-PC[2.5-4.99/0.01]-W[5-17.8/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-[40-100/10]-PC[2.5-4.99/0.01]-WC[2.5-4.99/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-LC[32-99.9/0.1]-P[5-19.97/0.01]-W[5-17.8/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-LC[32-99.9/0.1]-P[5-19.97/0.01]-WC[2.5-4.99/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-LC[32-99.9/0.1]-PC[2.5-4.99/0.01]-W[5-17.8/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS20-LC[32-99.9/0.1]-PC[2.5-4.99/0.01]-WC[2.5-4.99/0.01]-R[0.15-8.89/0.01]
GHW-MPHRS25-[40-100/10]-P[6-24.97/0.01]-W[6-22.8/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-[40-100/10]-P[6-24.97/0.01]-WC[3-5.99/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-[40-100/10]-PC[3-5.99/0.01]-W[6-22.8/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-[40-100/10]-PC[3-5.99/0.01]-WC[3-5.99/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-LC[32-99.9/0.1]-P[6-24.97/0.01]-W[6-22.8/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-LC[32-99.9/0.1]-P[6-24.97/0.01]-WC[3-5.99/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-LC[32-99.9/0.1]-PC[3-5.99/0.01]-W[6-22.8/0.01]-R[0.15-11.39/0.01]
GHW-MPHRS25-LC[32-99.9/0.1]-PC[3-5.99/0.01]-WC[3-5.99/0.01]-R[0.15-11.39/0.01]
GHW-MPHRX6-[60-80/10]-P[3.5-5.97/0.01]-W[3.5-4.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX6-LC[32-79.9/0.1]-P[3.5-5.97/0.01]-W[3.5-4.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX8-[60-100/10]-P[5-7.97/0.01]-W[5-5.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX8-LC[32-99.9/0.1]-P[5-7.97/0.01]-W[5-5.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX10-[60-100/10]-P[5-9.97/0.01]-W[5-7.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX10-LC[32-99.9/0.1]-P[5-9.97/0.01]-W[5-7.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX13-[60-100/10]-P[5-12.97/0.01]-W[5-10.8/0.01]-R[0.15-5.39/0.01]
GHW-MPHRX13-LC[32-99.9/0.1]-P[5-12.97/0.01]-W[5-10.8/0.01]-R[0.15-5.39/0.01]
Part NumberVolume DiscountDays to Ship RoHSTip shape B (Tip length) D (Shank diameter)
(mm)
P (Tip dimension)
(mm)
L (L Dimension)
(mm)
LC (Full length alteration)
(mm)
PC (Tip dimension alteration)
(mm)
R (Tip corner R)
(mm)
W (Tip dimension)
(mm)
WC (Tip dimension alteration)
(mm)

5 Days or more

CompliantRS205 ~ 19.9740 ~ 100--0.15 ~ 8.895 ~ 17.8-

5 Days or more

CompliantRS205 ~ 19.9740 ~ 100--0.15 ~ 8.89-2.5 ~ 4.99

5 Days or more

CompliantRS20-40 ~ 100-2.5 ~ 4.990.15 ~ 8.895 ~ 17.8-

5 Days or more

CompliantRS20-40 ~ 100-2.5 ~ 4.990.15 ~ 8.89-2.5 ~ 4.99

5 Days or more

CompliantRS205 ~ 19.97-32 ~ 99.9-0.15 ~ 8.895 ~ 17.8-

5 Days or more

CompliantRS205 ~ 19.97-32 ~ 99.9-0.15 ~ 8.89-2.5 ~ 4.99

5 Days or more

CompliantRS20--32 ~ 99.92.5 ~ 4.990.15 ~ 8.895 ~ 17.8-

5 Days or more

CompliantRS20--32 ~ 99.92.5 ~ 4.990.15 ~ 8.89-2.5 ~ 4.99

5 Days or more

CompliantRS256 ~ 24.9740 ~ 100--0.15 ~ 11.396 ~ 22.8-

5 Days or more

CompliantRS256 ~ 24.9740 ~ 100--0.15 ~ 11.39-3 ~ 5.99

5 Days or more

CompliantRS25-40 ~ 100-3 ~ 5.990.15 ~ 11.396 ~ 22.8-

5 Days or more

CompliantRS25-40 ~ 100-3 ~ 5.990.15 ~ 11.39-3 ~ 5.99

5 Days or more

CompliantRS256 ~ 24.97-32 ~ 99.9-0.15 ~ 11.396 ~ 22.8-

5 Days or more

CompliantRS256 ~ 24.97-32 ~ 99.9-0.15 ~ 11.39-3 ~ 5.99

5 Days or more

CompliantRS25--32 ~ 99.93 ~ 5.990.15 ~ 11.396 ~ 22.8-

5 Days or more

CompliantRS25--32 ~ 99.93 ~ 5.990.15 ~ 11.39-3 ~ 5.99

5 Days or more

CompliantRX63.5 ~ 5.9760 ~ 80--0.15 ~ 5.393.5 ~ 4.8-

5 Days or more

CompliantRX63.5 ~ 5.97-32 ~ 79.9-0.15 ~ 5.393.5 ~ 4.8-

5 Days or more

CompliantRX85 ~ 7.9760 ~ 100--0.15 ~ 5.395 ~ 5.8-

5 Days or more

CompliantRX85 ~ 7.97-32 ~ 99.9-0.15 ~ 5.395 ~ 5.8-

5 Days or more

CompliantRX105 ~ 9.9760 ~ 100--0.15 ~ 5.395 ~ 7.8-

5 Days or more

CompliantRX105 ~ 9.97-32 ~ 99.9-0.15 ~ 5.395 ~ 7.8-

5 Days or more

CompliantRX135 ~ 12.9760 ~ 100--0.15 ~ 5.395 ~ 10.8-

5 Days or more

CompliantRX135 ~ 12.97-32 ~ 99.9-0.15 ~ 5.395 ~ 10.8-

Loading...

Basic Information

Heavy-load punches No Shank type Single-stepped Jector None
Material Powdered high-speed steel Surface treatment HW coating Shank (mounting part) shape With key flat tap
Shank diameter D tolerance +0.005/0 Specification Tapped standard type

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET