One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type- (Part Numbers)

One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
CPNKG-5ET12-[70-500/0.01]-P[10-11.99/0.01]-F[50-499.5/0.01]-A[2-11.99/0.01]-V[2-11.99/0.01]-R[0.3-5/0.1]-K[21-45/1]-S[0.1-50/0.1]
Part NumberVolume DiscountDays to Ship RoHSHead thickness D/P (Shaft diameter)
(mm)
Step (Step shape) Shape (Tip shape) A/V (Tip tolerance) No. (Nominal diameter)
(mm)
A (Tip part)
(mm)
C (Tip part)
(mm)
F (Shaft diameter length)
(mm)
G (Tip C chamfering width on the tip part)
(mm)
K (Tip part angle)
(°)
L (L dimension)
(mm)
Q (Tip R chamfering on the tip part)
(mm)
R (Tip part)
(mm)
S (Tip tapered width on the tip part)
(mm)
V (Tip diameter in the tip part)
(mm)

7 Days or more

Compliant4mm(T4)10 ~ 11.99ET±0.01122 ~ 11.99-50 ~ 499.5-21 ~ 4570 ~ 500-0.3 ~ 50.1 ~ 502 ~ 11.99

Loading...

Basic Information

Material SKD61 Surface treatment Nitrided Shaft diameter tolerance -0.01/-0.02 (Reference tolerance)
Shape One-step Applicable sleeve hole diameter tolerance +0.01/0 or H7 With/without cooling hole No

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET