Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
ESVFX3-[100-150/0.01]-P[2.5-3/0.01]-V[1-1.5/0.01]-N[50-120/1]-S[2-4/1]
ESVFX4-[100-150/0.01]-P[3-4/0.01]-V[1-2/0.01]-N[50-120/1]-S[2-6/1]
ESVFX5-[100-200/0.01]-P[3.5-5/0.01]-V[1-3/0.01]-N[50-170/1]-S[2-9/1]
ESVFX6-[100-200/0.01]-P[4.5-6/0.01]-V[1-4/0.01]-N[50-170/1]-S[2-12/1]
ESVFX7-[100-200/0.01]-P[5.5-7/0.01]-V[1-5/0.01]-N[50-170/1]-S[2-15/1]
ESVFX8-[100-200/0.01]-P[6.5-8/0.01]-V[1-6/0.01]-N[50-170/1]-S[2-18/1]
Part NumberVolume DiscountDays to Ship RoHSD/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
P (Tip diameter)
(mm)
L (L dimension)
(mm)
N
(mm)
S (V hole diameter length)
(mm)

5 Days or more

631 ~ 1.52.5 ~ 3100 ~ 15050 ~ 1202 ~ 4

5 Days or more

641 ~ 23 ~ 4100 ~ 15050 ~ 1202 ~ 6

5 Days or more

651 ~ 33.5 ~ 5100 ~ 20050 ~ 1702 ~ 9

5 Days or more

661 ~ 44.5 ~ 6100 ~ 20050 ~ 1702 ~ 12

5 Days or more

671 ~ 55.5 ~ 7100 ~ 20050 ~ 1702 ~ 15

5 Days or more

681 ~ 66.5 ~ 8100 ~ 20050 ~ 1702 ~ 18

Loading...

  1. 1

Basic Information

Product composition Single sleeve Material SKH51 Surface treatment No
Head thickness 4mm(T4) Shaft diameter tolerance 0/-0.005 Concentricity between the hole and shaft diameters ◎0.005
Boring method Grinding Inner dia. tolerance +0.005/0 Tapered or not Yes
Center pin tip shape No

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Die & Mold Division
Tel:847-843-9105 (ext. 370) / FAX:847-843-9107
Mon. - Fri. 9 a.m. - 6 p.m. ET