Empowering Engineers with Configurable Components
Our Business Hours: Mon. - Fri. 7 a.m. - 9 p.m. ET | Sat. 8 a.m. - 5 p.m. ET
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- Connector
- Wire/Cable
- Crimp terminal
- Equipment supported cable
- Zip tie
- Cable gland
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Protection tube
- Duct/Wiring
- General purpose tool
- Dedicated tools
- Soldering supplies
- Personal computer/AV cable
- LAN/Network cable
- Cable with connector
- RS232C Cable
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Milling Cutter Insert / Holder
- Customized Straight Blade End Mill
- Dedicated Cutter
- Turning Tool
- Drill
- Screw Hole Related Tools
- Reamer
- Chamfering, Centering Tool
- Cutting Tool Related Equipment
- Step Drill
- Hole Saw
- Clean Key Cutter
- Core Drill (Tip Tool)
- Magnetic Drilling Machine Cutter
- Drill for Electric Drill
- Woodworking Drill Cutter
- Drill for Concrete
- Processing Tools
- Material Handling & Storage
- Tape Supplies
- Cushioning
- Stretch Film
- Cardboard
- Plastic Bag
- PP Band
- Magic Tape / Binding Tape
- Rubber Band
- String / Rope
- Cable Tie
- Label
- Labeler
- Cutter for Unpacking
- Packing Support Equipment
- Cloth / Sheet for Packing
- Carriage / Hand Truck
- Tool Wagon
- Tool Cabinet / Container Rack
- Lifter / Hand Pallet
- Container / Pallet
- Storage Supplies
- Shelf / Rack
- Workbench
- Hanging Clamp / Hanging Belt
- Jack / Winch
- Chain Block / Crane
- Bottle / Container
- Bike Storage
- Safety & General Supplies
- Lab & Clean Room Supplies
- General-purpose Equipment for Research
- Measurement Equipment for Research
- Research Equipment / Storage / Transportation Supplies
- Culture / Separation / Analysis Supplies
- Laboratory Containers
- Laboratory Essentials
- Laboratory Equipment
- Washing / Sterilization / Cleaning Supplies
- Clean Environment-Related Equipment
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components for Molding
- Components of Large Mold, Die Casting
- Injection Molding Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Precision Linear Shafts - Both Ends Tapped (Part Numbers)
- Lead Time Reduction
Selectable from 2 Types: Perpendicularity 0.03 Guaranteed Precision Type and Standard Type.
- METRIC
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment |
|||
| Precision Type | Standard | |||||
| D Tol. g6 | D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
| VFJW | SFJW | SFUW | - | 52100 Bearing Steel | Effective Hardened Depth of Induction Hardened >>Click here 52100 Bearing Steel 58HRC~ 440C Stainless Steel 56HRC~ |
- |
| VSFJW | SSFJW | SSFUW | - | 440C Stainless Steel | ||
| VPFJW | PSFJW | PSFUW | - | 52100 Bearing Steel | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More |
|
| VPSFJW | PSSFJW | PSSFUW | - | 440C Stainless Steel | ||
| VRJW | RSFJW | - | - | 52100 Bearing Steel | Low Temp. Black Chrome Plating | |
| - | - | - | PSFGW | 1045 Carbon Steel | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
| - | - | - | PSSFGW | 304 Stainless Steel | ||
Specifications
| Part Number | - | L | - | M | - | N |
| VFJW8 SSFJW20 |
- - |
200 500 |
- - |
M4 M6 |
- - |
N4 N10 |
| D Tol. | |||
| D | g6 | h5 | f8 |
| 4 | -0.004 -0.012 |
0 -0.005 |
- |
| 5 | |||
| 6 | -0.010 -0.028 |
||
| 8 | -0.005 -0.014 |
0 -0.006 |
-0.013 -0.035 |
| 10 | |||
| 12 | -0.006 -0.017 |
0 -0.008 |
-0.016 -0.043 |
| 13 | |||
| 15 | |||
| 16 | |||
| 18 | |||
| 20 | -0.007 -0.020 |
0 -0.009 |
-0.020 -0.053 |
| 25 | |||
| 30 | |||
| 35 | -0.009 -0.025 |
0 -0.011 |
-0.025 -0.064 |
| 40 | |||
| 50 | |||
| Part Number | L 1mm Increment |
M (Coarse Thread), N (Coarse Thread) | C | |||||||||||
| Type | D | |||||||||||||
| Precision Type (D Tolerance g6) VFJW VSFJW VPFJW VPSFJW VRJW |
4 | 25~200 | 2 | 0.2 or Less | ||||||||||
| 5 | 25~300 | 2.6 | 3 | |||||||||||
| 6 | 25~300 | 3 | 0.5 or Less | |||||||||||
| 8 | 25~300 | 3 | 4 | 5 | ||||||||||
| 10 | 25~350 | 3 | 4 | 5 | 6 | |||||||||
| 12 | 25~350 | 4 | 5 | 6 | 8 | |||||||||
| 13 | 25~350 | 4 | 5 | 6 | 8 | |||||||||
| 15 | 25~350 | 4 | 5 | 6 | 8 | 10 | ||||||||
| 16 | 25~350 | 4 | 5 | 6 | 8 | 10 | ||||||||
| 18 | 25~350 | 4 | 5 | 6 | 8 | 10 | 12 | |||||||
| 20 | 30~450 | 4 | 5 | 6 | 8 | 10 | 12 | 1.0 or Less | ||||||
| 25 | 30~450 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | ||||||
| 30 | 30~450 | 6 | 8 | 10 | 12 | 16 | 20 | |||||||
| Part Number | L 1mm Increment |
M (Coarse Thread), N (Coarse Thread) | C | ||||||||||||||
| Type | D | ||||||||||||||||
| Standard Type (D Tolerance g6) SFJW SSFJW PSFJW PSSFJW RSFJW(D≤30, L≤500) (D Tolerance f8) PSFGW PSSFGW |
(D Tolerance h5) SFUW SSFUW PSFUW PSSFUW |
4 | 20~ 300 | 2 | 0.2 or Less | ||||||||||||
| 5 | 20~ 400 | 2.6 | 3 | ||||||||||||||
| 6 | 20~ 600 | 3 | 0.5 or Less | ||||||||||||||
| 8 | 20~ 800 | 3 | 4 | 5 | |||||||||||||
| 10 | 20~ 800 | 3 | 4 | 5 | 6 | ||||||||||||
| 12 | 20~1000 | 4 | 5 | 6 | 8 | ||||||||||||
| 13 | 25~1000 | 4 | 5 | 6 | 8 | ||||||||||||
| 15 | 25~1000 | 4 | 5 | 6 | 8 | 10 | |||||||||||
| 16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | |||||||||||
| 18 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | ||||||||||
| 20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 1.0 or Less | |||||||||
| 25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | |||||||||
| 30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | ||||||||||
| 35 | 35~1500 | 8 | 10 | 12 | 16 | 20 | 24 | ||||||||||
| 40 | 50~1500 | 10 | 12 | 16 | 20 | 24 | 30 | ||||||||||
| 50 | 65~1500 | 12 | 16 | 20 | 24 | 30 | |||||||||||
Alterations
Alteration Details >> Click here
For details, see Shaft Alteration Overview >> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here
For details, see Shaft Alteration Overview >> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.
Loading...
| Part Number |
|---|
| SFUW4-[20-300/1]-M2-N2 |
| SFUW5-[20-400/1]-M[2.6,3]-N[2.6,3] |
| SFUW6-[20-600/1]-M3-N3 |
| SFUW8-[20-800/1]-M[3,4,5]-N[3,4,5] |
| SFUW10-[20-800/1]-M[3,4,5,6]-N[3,4,5,6] |
| SFUW10-[20-800/1]-M[3,4,5,6]-ND6 |
| SFUW10-[20-800/1]-MD6-N[3,4,5,6] |
| SFUW10-[20-800/1]-MD6-ND6 |
| SFUW12-[20-1000/1]-M[4,5,6,8]-N[4,5,6,8] |
| SFUW12-[20-1000/1]-M[4,5,6,8]-ND[6,8] |
| SFUW12-[20-1000/1]-M[4,5,6,8]-NSC8 |
| SFUW12-[20-1000/1]-MD[6,8]-N[4,5,6,8] |
| SFUW12-[20-1000/1]-MD[6,8]-ND[6,8] |
| SFUW12-[20-1000/1]-MD[6,8]-NSC8 |
| SFUW12-[20-1000/1]-MSC8-N[4,5,6,8] |
| SFUW12-[20-1000/1]-MSC8-ND[6,8] |
| SFUW12-[20-1000/1]-MSC8-NSC8 |
| SFUW13-[25-1000/1]-M[4,5,6,8]-N[4,5,6,8] |
| SFUW13-[25-1000/1]-M[4,5,6,8]-ND[6,8] |
| SFUW13-[25-1000/1]-M[4,5,6,8]-NSC8 |
| SFUW13-[25-1000/1]-MD[6,8]-N[4,5,6,8] |
| SFUW13-[25-1000/1]-MD[6,8]-ND[6,8] |
| SFUW13-[25-1000/1]-MD[6,8]-NSC8 |
| SFUW13-[25-1000/1]-MSC8-N[4,5,6,8] |
| SFUW13-[25-1000/1]-MSC8-ND[6,8] |
| SFUW13-[25-1000/1]-MSC8-NSC8 |
| SFUW15-[25-1000/1]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| SFUW15-[25-1000/1]-M[4,5,6,8,10]-ND[6,8,10] |
| SFUW15-[25-1000/1]-M[4,5,6,8,10]-NSC[8,10] |
| SFUW15-[25-1000/1]-MD[6,8,10]-N[4,5,6,8,10] |
| SFUW15-[25-1000/1]-MD[6,8,10]-ND[6,8,10] |
| SFUW15-[25-1000/1]-MD[6,8,10]-NSC[8,10] |
| SFUW15-[25-1000/1]-MSC[8,10]-N[4,5,6,8,10] |
| SFUW15-[25-1000/1]-MSC[8,10]-ND[6,8,10] |
| SFUW15-[25-1000/1]-MSC[8,10]-NSC[8,10] |
| SFUW16-[30-1200/1]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| SFUW16-[30-1200/1]-M[4,5,6,8,10]-ND[6,8,10] |
| SFUW16-[30-1200/1]-M[4,5,6,8,10]-NSC[8,10] |
| SFUW16-[30-1200/1]-MD[6,8,10]-N[4,5,6,8,10] |
| SFUW16-[30-1200/1]-MD[6,8,10]-ND[6,8,10] |
| SFUW16-[30-1200/1]-MD[6,8,10]-NSC[8,10] |
| SFUW16-[30-1200/1]-MSC[8,10]-N[4,5,6,8,10] |
| SFUW16-[30-1200/1]-MSC[8,10]-ND[6,8,10] |
| SFUW16-[30-1200/1]-MSC[8,10]-NSC[8,10] |
| SFUW18-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| SFUW18-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12] |
| SFUW18-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12] |
| SFUW18-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12] |
| SFUW18-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12] |
| SFUW18-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12] |
| SFUW18-[30-1200/1]-MSC[8,10,12]-N[4,5,6,8,10,12] |
| SFUW18-[30-1200/1]-MSC[8,10,12]-ND[6,8,10,12] |
| SFUW18-[30-1200/1]-MSC[8,10,12]-NSC[8,10,12] |
| SFUW20-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| SFUW20-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12] |
| SFUW20-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14] |
| SFUW20-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12] |
| SFUW20-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12] |
| SFUW20-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12,14] |
| SFUW20-[30-1200/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12] |
Loading...
Lead Time
PSFJW, SFJW, SSFJW
PSFGW, PSFJW, PSFUW, PSSFGW, PSSFJW, SFJW, SFUW, SSFJW, SSFUW
>>Click here
[ ! ]Non-Returnable
[ ! ] A flat charge of $21.6 for 3 or more identical pieces.
PSFGW, PSFUW, PSSFGW, PSSFJW, SFUW, SSFUW
>>Click here
[ ! ]Non-Returnable
[ ! ] A flat charge of $21.6 for 3 or more identical pieces.
PSSFUW
>>Click here
[ ! ]Non-Returnable
VRJW
[X]Express is not available for VRJW.
VFJW, VPFJW, VPSFJW, VSFJW
>>Click here
[ ! ]Non-Returnable
[ ! ] A flat charge of $21.6 for 3 or more identical pieces.
RSFJW
PSFGW, PSFJW, PSFUW, PSSFGW, PSSFJW, SFJW, SFUW, SSFJW, SSFUW
>>Click here[ ! ]Non-Returnable
[ ! ] A flat charge of $21.6 for 3 or more identical pieces.
PSFGW, PSFUW, PSSFGW, PSSFJW, SFUW, SSFUW
>>Click here[ ! ]Non-Returnable
[ ! ] A flat charge of $21.6 for 3 or more identical pieces.
PSSFUW
>>Click here[ ! ]Non-Returnable
VRJW
[X]Express is not available for VRJW.
VFJW, VPFJW, VPSFJW, VSFJW
>>Click here[ ! ]Non-Returnable
[ ! ] A flat charge of $21.6 for 3 or more identical pieces.
RSFJW
More Information
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).>> Click here
[ ! ]Full Length Hardness Guaranteed Shafts >> Click here
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> Click here
[ ! ]Features of Low Temp. Black Chrome Plating >> Click here
[ ! ]Full Length Hardness Guaranteed Shafts >> Click here
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> Click here
[ ! ]Features of Low Temp. Black Chrome Plating >> Click here
Example
Basic Information
| Basic Shape | Straight | End Shape (Left) | Tapped | End Shape (Right) | Tapped |
|---|
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Shaft End Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treated
- Not Hardened
- Induction Hardened
-
Surface Finish
- None
- Hard Chrome
- Low Temperature Black Chrome
-
Shaft Fits Tolerance
-
Length L(mm)
-
Coarse Tapped [M] Depth=Mx2
-
Coarse Tapped [N] Depth=Nx2
-
Coarse Tapped [MD] Depth=Mx3
-
Coarse Tapped [ND] Depth=Nx3
-
Fine Tapped [MSC] for M
-
Fine Tapped [NSC] for N
-
type
- PSFGW
- PSFJW
- PSFUW
- PSSFGW
- PSSFJW
- PSSFUW
- RSFJW
- SFJW
- SFUW
- SSFJW
- SSFUW
- VFJW
- VPFJW
- VPSFJW
- VRJW
- VSFJW
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Days or Less
- 5 Days or Less
- 9 Days or Less
- 18 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Precision Linear Shafts - One End Threaded with Undercut
- Precision Linear Shafts - Both Ends Tapped and Stepped with Wrench Flat - Precision Type
- Precision Linear Shafts - Hexagon Socket Type
- Precision Hollow Linear Shafts - One End Stepped
- Precision Linear Shafts - One Stepped End - Both Ends Tapped (INCH)
- Precision Hollow Linear Shafts - One End Threaded
- Oil-Less Guide Shaft (BGS)
- Linear Shafts (Inch) - Straight, L Type
Complementary Products
-
Shaft-sliding Linear Bushings with Pillow Blocks -Single / Double-
MISUMI Days to Ship : Same Day or more
Tech Support
- Automation Components Group
- Tel：800-681-7475 (ext. 360） / FAX：800-681-7402
- Mon. - Fri. 8:30 a.m. - 8 p.m. ET
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy