Free Expedite Available! Choose "Express C" to get your Linear Shafts 1 day faster!
*AVAILABLE ONLY FOR Diameter 6 to Diameter 30!!
*AVAILABLE ONLY FOR AL,AR,CT,DE,GA,IA,IL,IN,KY,LA,MA,MD,MI,MN,MO,MS,NC,NJ,NY,OH,PA,RI,SC,TN,VA,WI,WV
Part Number
Configured Part Number is shown.
Type | D Tol. | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | ||||
Solid | One End Tapped | One End Stepped and Tapped | One End Threaded | One End Threaded with O.D. same as Shaft O.D. | ||||
PSFCJ | PSFCT | PSFCG | PSFCN | PSFCQ | g6 | 52100 Bearing Steel | Effective Hardened Depth of Induction Hardened >> Click here 58HRC~ | Electroless Nickel Plating |
Part Number | - | L | - | F | - | B | - | P | - | M |
PSFCJ20 | - | 75 | ||||||||
PSFCT20 | - | 525 | - | M8 | ||||||
PSFCG20 | - | 400 | - | F25 | - | P16 | - | M10 | ||
PSFCN20 | - | 950 | - | F50 | - | B30 | - | P10 | ||
PSFCQ12 | - | 500 | - | B20 |
Part Number | 1mm Increment | Selection | (Y)Max. | R | C | |||||||||||||||||||||||||
Type | D | L (Solid / One End Tapped) | L (One End Stepped and Tapped) | F | P | M (One End Tapped) | M (One End Stepped and Tapped) | |||||||||||||||||||||||
Solid Type PSFCJ One End Tapped Type PSFCT One End Stepped and Tapped PSFCG | 8 | 20~ 800 | 25~798 | 2≤F≤Px4 | 6 | 3 | 4 | 5 | 3 | 800 | 0.3 or Less | 0.5 or Less | ||||||||||||||||||
10 | 20~ 800 | 25~798 | 6~ 8 | 3 | 4 | 5 | 6 | 3 | 4 | 5 | 800 | |||||||||||||||||||
12 | 20~1000 | 25~998 | 6~10 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 1000 | ||||||||||||||||||
15 | 25~1000 | 25~998 | 6~13 | 4 | 5 | 6 | 8 | 10 | 3 | 4 | 5 | 6 | 8 | 10 | 1000 | |||||||||||||||
20 | 30~1000 | 25~998 | 6~17 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 1000 | 1.0 or Less | |||||||||||||
25 | 35~1000 | 25~998 | 8~22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1000 | ||||||||||||
30 | 35~1000 | 25~998 | 9~27 | 6 | 8 | 10 | 12 | 16 | 20 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 1000 | |||||||||||||
35 | 35~1000 | 25~998 | 9~32 | 8 | 10 | 12 | 16 | 20 | 24 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | 0.5 or Less | |||||||||||
40 | 50~1000 | 25~998 | 11~37 | 10 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | ||||||||||||
50 | 65~1000 | 25~998 | 11~47 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 |
Part Number | 1mm Increment | P Selecttion | (Y)Max. | R | C | |||||||||||||
Type | D | L | F | B | ||||||||||||||
One End Threaded PSFCN | 8 | 25~798 | 2≤F≤Px5 | (When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (P≥12) B≤F-5 [ ! ]B≥Pitchx3 | 3 | 4 | 5 | 6 | 800 | 0.3 or Less | 0.5 or Less | |||||||
10 | 25~798 | 4 | 5 | 6 | 8 | 800 | ||||||||||||
12 | 25~998 | 5 | 6 | 8 | 10 | 1000 | ||||||||||||
15 | 25~998 | 5 | 6 | 8 | 10 | 12 | 1000 | 1.0 or Less | ||||||||||
20 | 25~998 | 6 | 8 | 10 | 12 | 16 | 1000 | |||||||||||
25 | 25~998 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | ||||||||||
30 | 25~998 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | ||||||||||
35 | 25~998 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | 0.5 or Less | |||||||||
40 | 25~998 | 12 | 16 | 20 | 24 | 30 | 1000 | |||||||||||
50 | 25~998 | 16 | 20 | 24 | 30 | 1000 |
Coarse Thread Dimension | |
M | Pitch |
3 | 0.5 |
4 | 0.7 |
5 | 0.8 |
6 | 1.0 |
8 | 1.25 |
10 | 1.5 |
12 | 1.75 |
16 | 2.0 |
20 | 2.5 |
24 | 3.0 |
30 | 3.5 |
Part Number | 1mm Increment | M | (Y)Max. | R | C | ||
Type | D | L | B | ||||
One End Threaded with O.D. same as Shaft O.D. PSFCQ | 8 | 25~793 | 7~ 40 | 8 | 800 | 0.3 or Less | 0.5 or Less |
10 | 25~795 | 8~ 50 | 10 | 800 | |||
12 | 25~991 | 9~ 60 | 12 | 1000 | |||
20 | 25~987 | 13~100 | 20 | 1000 | 1.0 or Less | ||
30 | 25~982 | 18~150 | 30 | 1000 |
Part Number |
---|
PSFCG8-[20-800/1]-F[2-24/1]-P6-M3 |
PSFCG10-[20-800/1]-F[2-32/1]-P[6-8/1]-M[3,4,5] |
PSFCG12-[20-1000/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6] |
PSFCG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10] |
PSFCG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-MSC8 |
PSFCG20-[25-1000/1]-F[2-68/1]-P[6-17/1]-M[4,5,6,8,10,12] |
PSFCG20-[25-1000/1]-F[2-68/1]-P[6-17/1]-MSC[8,10] |
PSFCG25-[35-1000/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16] |
PSFCG25-[35-1000/1]-F[2-88/1]-P[8-22/1]-MSC[8,10,12,14] |
PSFCG30-[35-1000/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20] |
PSFCG35-[35-1000/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24] |
PSFCG35-[35-1000/1]-F[2-128/1]-P[9-32/1]-MSC[8,10,12,14,18] |
PSFCG40-[50-1000/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30] |
PSFCG40-[50-1000/1]-F[2-148/1]-P[11-37/1]-MSC[8,10,12,14,18] |
PSFCG50-[65-1000/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30] |
PSFCG50-[65-1000/1]-F[2-188/1]-P[11-47/1]-MSC[10,12,14,18] |
PSFCJ8-[20-800/1] |
PSFCJ10-[20-800/1] |
PSFCJ12-[20-1000/1] |
PSFCJ15-[25-1000/1] |
PSFCJ20-[30-1000/1] |
PSFCJ25-[35-1000/1] |
PSFCJ30-[35-1000/1] |
PSFCJ35-[35-1000/1] |
PSFCJ40-[50-1000/1] |
PSFCJ50-[65-1000/1] |
PSFCN8-[25-800/1]-F[2-30/1]-B[2-28/1]-P[3,4,5,6] |
PSFCN8-[25-800/1]-F[2-30/1]-B[2-28/1]-PMC[3,4,5,6] |
PSFCN10-[25-800/1]-F[2-40/1]-B[2-38/1]-P[4,5,6,8] |
PSFCN10-[25-800/1]-F[2-40/1]-B[2-38/1]-PMC[4,5,6,8] |
PSFCN12-[25-1000/1]-F[2-50/1]-B[2-48/1]-P[5,6,8,10] |
PSFCN12-[25-1000/1]-F[2-50/1]-B[2-48/1]-PMC[5,6,8,10] |
PSFCN12-[25-1000/1]-F[2-50/1]-B[2-48/1]-PMS10 |
PSFCN15-[25-1000/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12] |
PSFCN15-[25-1000/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12] |
PSFCN15-[25-1000/1]-F[2-60/1]-B[2-58/1]-PMS[10,12,14] |
PSFCN20-[25-1000/1]-F[2-80/1]-B[2-78/1]-P[6,8,10,12,16] |
PSFCN20-[25-1000/1]-F[2-80/1]-B[2-78/1]-PMC[6,8,10,12,15,17] |
PSFCN20-[25-1000/1]-F[2-80/1]-B[2-78/1]-PMS[10,12,14,18] |
PSFCN25-[25-1000/1]-F[2-120/1]-B[2-118/1]-P[8,10,12,16,20,24] |
PSFCN25-[25-1000/1]-F[2-120/1]-B[2-118/1]-PMC[8,10,12,15,17,20] |
PSFCN25-[25-1000/1]-F[2-120/1]-B[2-118/1]-PMS[10,12,14,18] |
PSFCN30-[25-998/1]-F[2-120/1]-B[2-118/1]-P[8,10,12,16,20,24] |
PSFCN30-[25-998/1]-F[2-120/1]-B[2-118/1]-PMC[8,10,12,15,17,20,25] |
PSFCN30-[25-998/1]-F[2-120/1]-B[2-118/1]-PMS[10,12,14,18] |
PSFCN35-[25-1000/1]-F[2-150/1]-B[2-148/1]-P[10,12,16,20,24,30] |
PSFCN35-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMC[10,12,15,17,20,25,30] |
PSFCN35-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMS[10,12,14,18] |
PSFCN40-[25-1000/1]-F[2-150/1]-B[2-148/1]-P[12,16,20,24,30] |
PSFCN40-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMC[12,15,17,20,25,30] |
PSFCN40-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMS[12,14,18] |
PSFCN50-[25-1000/1]-F[2-150/1]-B[2-148/1]-P[16,20,24,30] |
PSFCN50-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMC[15,17,20,25,30] |
PSFCN50-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMS[14,18] |
PSFCQ8-[25-800/1]-B[2-40/1] |
PSFCQ10-[25-800/1]-B[2-50/1] |
PSFCQ12-[25-1000/1]-B[2-60/1] |
PSFCQ20-[25-1000/1]-B[2-100/1] |
PSFCQ30-[25-1000/1]-B[2-150/1] |
PSFCT8-[20-800/1]-M[3,4,5] |
Loading...
Shaft End Perpendicularity | Perpendicularity (0.2) | Material | 52100 Bearing Steel | Heat Treated | Induction Hardened |
---|---|---|---|---|---|
Surface Finish | Electroless Nickel | Shaft Fits Tolerance | g6 |
MISUMI
Days to Ship : 3 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy