Empowering Engineers with

Configurable Components

Our business hours are 7:00 am ~ 9:00 pm ET (Monday to Friday).

All Categories

Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

XY-Axis Automatic Stages - Linear Ball Guide

XY-Axis Automatic Stages - Linear Ball Guide

XY-Axis Motorized Stages with High Rigidity / High Precision

Part Number Configured Part Number is shown.

MSCB (Cable, Sold Separately >> Click here)




[ M ] Material: 440C Stainless Steel
[ S ] Surface Treatment: Electroless Nickel Plating

Specifications

Part Number-Sensor
XYMSG413-RA5
[ ! ]24VDC sensors cannot be operated from the MSCTL102 controller.
[ ! ]If the 5V sensors are selected, applying voltages exceeding 5V will damage the sensors.
[Common Specifications] [ ! ]The accuracy specifications below are certified for single-axis horizontal mounting orientation.
Feed ScrewBall Screw Ø6, Lead 1
GuideLinear Ball Guide
Resolution *12µm/Pulse (Full)
1µm/Pulse (Half)
MAX Speed *210mm/sec
(Pulse Rate: 5kHz)

Repeatability±0.5µm or less
Lost Motion1µm or less
Backlash0.5µm or less
Motion Orthogonality5µm or less / Full Stroke
* 1 Stage travel per one pulse.
* 2 Max. speed capable with our controller (MSCTL102) driving in Full Step mode, stage loaded at a max load capacity.
(The value changes depending on the driver and controller used, or the load.)

Basic Information

Type XY-Axis Motorized Stages Motor, Motor Characteristics 5-Phase Stepping Motor Resolution(µm) 2μm
Material SUS440C Guide Linear Ball Guide Table feeding methods Ball screw
Surface Treatment Electroless Nickel Plating Through Hole (Table Center Hole) No Load Capacity (Range)(N) 50.1~100
Positioning Accuracy(µm) 6 Sensors Limit+Home

Configure

Clear All

Specification/Dimensions

  • Type

    • XY-Axis Motorized Stages
  • Motor, Motor Characteristics

    • 5-Phase Stepping Motor
  • Resolution(µm)

    • 2μm
  • Material

    • SUS440C
  • Guide

    • Linear Ball Guide
  • Table feeding methods

    • Ball screw
  • Table Length(mm)

    • 40
    • 50
    • 60
    • 70
  • Table width(mm)

    • 40
    • 50
    • 60
    • 70
  • Stroke (X Distance)(mm)

    • 13
    • 15
  • Stroke (Y Distance)(mm)

    • 13
    • 15
  • Surface Treatment

    • Electroless Nickel Plating
  • Through Hole (Table Center Hole)

    • No
  • Load Capacity (Range)(N)

    • 50.1~100
  • Allowable Load(N)

    • 89.2
    • 91.1
    • 92.1
    • 93.1
  • Positioning Accuracy(µm)

    • 6
  • Sensors

    • Limit+Home
  • Sensor Selection

    • LA5
    • LC5
    • RA5
    • RC5
    • LA24
    • LC24
    • RA24
    • RC24
  • Type

    • XYMSG
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • ALL
    • 7 Days or Less

Tech Support

Automation Components Group
TEL:800-681-7475 (ext.360) / FAX:800-681-7402
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry