[High Accuracy] Z Axis Feed Screw -Square- -Reinforced Clamp- -Dovetail Groove-

[High Accuracy] Z Axis Feed Screw -Square- -Reinforced Clamp- -Dovetail Groove-

Z Dovetail Slide Stage with the position holding performance improved by directly clamping the feed knob shaft. This is suitable for fine feeding of 0.5mm lead.

[ M ] Material: (Main Body) Low Cadmium Brass
(Feed Knob) Aluminum
[ S ] Surface Treatment: Black Fluororesin Treatment


Part Number
Part NumberStage Surface (mm)Travel Distance (mm)Travel per Knob Rotation (mm)Load Capacity (N)Travel AccuracyMoment Load Capacity (N·m)Weight (kg)Accessories (4 pcs.)
TypeNo.Straightness (µm)PitchingYawingRollingType M-L
ZEGCL2525x25±50.59.8302.0 1.5 1.5 0.10SCB2-8
4040x40±79.84.0 3.0 3.0 0.27SCB3-8
6060x60±919.65.0 4.0 4.0 0.71SCB4-10
[ ! ]Resolution (Vernier Scale Indication): 0.1mm/division
[ ! ]Extension Cover HDEXT12 (Sold Separately): Ø12 feed screw knob can be extended. >> Click here
[ ! ]XY-Axis Mounting Plate XPLTE: Use this plate when connecting stages with non-matching mounting holes. >> Click here
[ ! ]There will be residual clearances with carriages retained only with a Reinforced Clamp. Use a Clamp Screw in combination.
[ ! ]For orders larger than indicated quantity, please request a quotation.


Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Part Number
Part NumberVolume DiscountDays to Ship RoHSTable Size (Length) L (Range)
Table Size (Width) W (Range)
Table Size (Length) L
Table Size (Width) W
Allowable Load
Travel Distance (Z Distance)
Table Straightness

7 Days or more


7 Days or more


7 Days or more



  1. 1

Lead Time


Basic Information

Stage Surface Orientation Z-Axis Travel Distance (Selection Range) ~ ±10mm Load Capacity (Range)(N) 5~30
Feeding Method Feed Screw Guiding Mechanism Dovetail Slide Table Material Low Cadmium Brass
Z-Axis Stage Surface Z-Axis Through Hole (Table Center Hole) No Feed Knob Position Center
Clamp Reinforced Clamp Split Fastening Reversed Standard Feed method (feed screw type) Knob
Feed method (with vernier scale) With Vernier Scale Feed method (feed pitch)(mm) 0.5

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET