Empowering Engineers with

Configurable Components

Our business hours: Mon. - Fri. 7 a.m. - 9 p.m. ET | Sat. 8 a.m - 5 p.m. ET.

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

90 Degree Curved Aluminum Frames for Corner -For FS8 Series-

Part Number Configured Part Number is shown.
90 Degree Curved Aluminum Frames for Corner -For FS8 Series-:Related Image




[ M ] Material: A6N01SS-T5 Aluminum Alloy
[ S ] Surface Treatment: Anodize

Specifications

Part Number-R
HFSMGQ8-4040-R140
Part NumberRSlot WidthMass kgSectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSMGQ8-4040140101.264010.4x10410.4x104

Alterations

90 Degree Curved Aluminum Frames for Corner -For FS8 Series-:Related Image
 Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  
 

Basic Information

Standard Extrusion Size(mm) 40 Extrusion Size 40x40 Extrusion Series 8 Series
Extrusion Type Curved Number of Extrusion Slots 1 Slot-1 Slot Extrusion Type HFS
Surface Finish Clear Anodize Number of Grooved Surfaces Four Side Slots Surface Milled None
Material A6N01SS-T5 Aluminum Alloy Extrusion Size - Width (A)(mm)(mm) 40 Extrusion Size - Thickness (T)(mm)(mm) 40
L Dimension Fixed, Specified Standard, Fixed Extrusion Bending Radius R 140

Configure

Clear All

Specification/Dimensions

  • Standard Extrusion Size(mm)

    • 40
  • Extrusion Size

    • 40x40
  • Extrusion Series

    • 8 Series
  • Extrusion Type

    • Curved
  • Number of Extrusion Slots

    • 1 Slot-1 Slot
  • Extrusion Type

    • HFS
  • Surface Finish

    • Clear Anodize
  • Number of Grooved Surfaces

    • Four Side Slots
  • Surface Milled

    • None
  • Material

    • A6N01SS-T5 Aluminum Alloy
  • Extrusion Size - Width (A)(mm)(mm)

    • 40
  • Extrusion Size - Thickness (T)(mm)(mm)

    • 40
  • L Dimension Fixed, Specified

    • Standard, Fixed
  • Alterations

    • LCH (Fastening Location Wrench Access Hole Machining, Left, Horizontal)
    • LCV (Fastening Location Wrench Access Hole Machining, Left, Crossed)
    • LCV (Fastening Location Wrench Access Hole Machining, Left, Vertical)
    • LDH (D Hole Machining, Left, Horizontal)
    • LDV (D Hole Alterations, Left, Vertical)
    • LMH (M Hole Machining, Left, Horizontal)
    • LMV (M Hole Machining, Left, Vertical)
    • LSH (S Hole Machining, Left, Horizontal)
    • LSV (S Hole Machining, Left, Vertical)
    • LTP (Tapping Alterations, Left)
    • Not Provided
    • RCH (Fastening Location Wrench Access Hole Machining, Right, Horizontal)
    • RCP (Fastening Location Wrench Access Hole Alterations, Right, Crossed)
    • RCV (Fastening Location Wrench Access Hole Machining, Right, Vertical)
    • RDH (D Hole Alterations, Right, Horizontal)
    • RDV (D Hole Machining, Right, Vertical)
    • RMH (M Hole Machining, Right, Horizontal)
    • RMV (M Hole Machining, Right, Vertical)
    • RSH (S Hole Alterations, Right, Horizontal)
    • RSV (S Hole Machining, Right, Vertical)
    • RTP (Tapping Alterations, Right)
    • TPW (Tapping Alterations, Both)
  • Extrusion Bending Radius R

    • 140
  • Type

    • HFSMGQ8-4040
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • ALL
    • 4 Days or Less
    • 5 Days or Less

Tech Support

Automation Components Group
TEL:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET
Technical Inquiry