90 Degree Curved Aluminum Frames for Corner -For FS8 Series-

90 Degree Curved Aluminum Frames for Corner -For FS8 Series-:Related Image
・Materials
[ M ] Material: A6N01SS-T5 Aluminum Alloy
[ S ] Surface Treatment: Anodize

Specifications

Part Number-R
HFSMGQ8-4040-R140
Part NumberRSlot WidthMass kgSectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSMGQ8-4040140101.264010.4x10410.4x104

Alterations

90 Degree Curved Aluminum Frames for Corner -For FS8 Series-:Related Image
 Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  
 

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Loading...
Part Number
HFSMGQ8-4040-R140
HFSMGQ8-4040-R140-LCH
HFSMGQ8-4040-R140-LCP
HFSMGQ8-4040-R140-LCV
HFSMGQ8-4040-R140-LDH
HFSMGQ8-4040-R140-LDV
HFSMGQ8-4040-R140-LMH
HFSMGQ8-4040-R140-LMV
HFSMGQ8-4040-R140-LSH
HFSMGQ8-4040-R140-LSV
HFSMGQ8-4040-R140-LTP
HFSMGQ8-4040-R140-RCH
HFSMGQ8-4040-R140-RCP
HFSMGQ8-4040-R140-RCV
HFSMGQ8-4040-R140-RDH
HFSMGQ8-4040-R140-RDV
HFSMGQ8-4040-R140-RMH
HFSMGQ8-4040-R140-RMV
HFSMGQ8-4040-R140-RSH
HFSMGQ8-4040-R140-RSV
HFSMGQ8-4040-R140-RTP
HFSMGQ8-4040-R140-TPW
Part NumberVolume DiscountDays to Ship RoHSAlterations
Available

4 Days or more

CompliantNot Provided
Available

5 Days or more

CompliantLCH (Fastening Location Wrench Access Hole Machining, Left, Horizontal)
Available

5 Days or more

CompliantLCV (Fastening Location Wrench Access Hole Machining, Left, Crossed)
Available

5 Days or more

CompliantLCV (Fastening Location Wrench Access Hole Machining, Left, Vertical)
Available

5 Days or more

CompliantLDH (D Hole Machining, Left, Horizontal)
Available

5 Days or more

CompliantLDV (D Hole Alterations, Left, Vertical)
Available

5 Days or more

CompliantLMH (M Hole Machining, Left, Horizontal)
Available

5 Days or more

CompliantLMV (M Hole Machining, Left, Vertical)
Available

5 Days or more

CompliantLSH (S Hole Machining, Left, Horizontal)
Available

5 Days or more

CompliantLSV (S Hole Machining, Left, Vertical)
Available

5 Days or more

CompliantLTP (Tapping Alterations, Left)
Available

5 Days or more

CompliantRCH (Fastening Location Wrench Access Hole Machining, Right, Horizontal)
Available

5 Days or more

CompliantRCP (Fastening Location Wrench Access Hole Alterations, Right, Crossed)
Available

5 Days or more

CompliantRCV (Fastening Location Wrench Access Hole Machining, Right, Vertical)
Available

5 Days or more

CompliantRDH (D Hole Alterations, Right, Horizontal)
Available

5 Days or more

CompliantRDV (D Hole Machining, Right, Vertical)
Available

5 Days or more

CompliantRMH (M Hole Machining, Right, Horizontal)
Available

5 Days or more

CompliantRMV (M Hole Machining, Right, Vertical)
Available

5 Days or more

CompliantRSH (S Hole Alterations, Right, Horizontal)
Available

5 Days or more

CompliantRSV (S Hole Machining, Right, Vertical)
Available

5 Days or more

CompliantRTP (Tapping Alterations, Right)
Available

5 Days or more

CompliantTPW (Tapping Alterations, Both)

Loading...

  1. 1

Lead Time

90 Degree Curved Aluminum Frames for Corner -For FS8 Series-:Related Image

Example

90 Degree Curved Aluminum Frames for Corner -For FS8 Series-:Related Image
HDJRN8 (>> Click here)
HDJFSN8 (>> Click here)
 

Basic Information

Standard Extrusion Size(mm) 40 Extrusion Size 40x40 Extrusion Series 8 Series
Extrusion Type Curved Number of Extrusion Slots 1 Slot-1 Slot Extrusion Type HFS
Surface Finish Clear Anodize Number of Grooved Surfaces Four Side Slots Surface Milled None
Material A6N01SS-T5 Aluminum Alloy Extrusion Size - Width (A)(mm)(mm) 40 Extrusion Size - Thickness (T)(mm)(mm) 40
L Dimension Fixed, Specified Standard, Fixed Extrusion Bending Radius R 140

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET