• MISUMI USA’s online catalog has upgraded to a new version. We hope you enjoy your experience. Click here for login assistance.
    If you have any questions about our site, please contact us.

Shafts -Tapped Pilot-

Shafts -Tapped Pilot-:Related Image
・Materials
Type[ M ]Material[ H ]Hardness[ S ]Surface
Treatment
One End TappedOne End Stepped and TappedOne End ThreadedOne End Threaded with O.D. same as Shaft O.D.
SFITSFIGSFINSFIQ52100 Bearing SteelEffective Hardened Depth of Induction Hardened >> Click here
52100 Bearing Steel 58HRC~
440C Stainless Steel 56HRC~
-
SSFITSSFIGSSFINSSFIQ440C Stainless Steel
PSFITPSFIGPSFINPSFIQ52100 Bearing SteelHard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
PSSFITPSSFIGPSSFINPSSFIQ440C Stainless Steel
MaterialsEND

Specifications

Part Number-L-F-B-P-M-N
SFIT12-500-M4-N4
PSSFIG30-1000-F4-P10-M6-N10
D Tol.
Dg6
12-0.006
-0.017
13
15
16
18
20-0.007
-0.020
25
30
■One End Tapped, One End Stepped and Tapped
Part Number1mm IncrementSelectionPilot Dimensions(Y)Max.RC
TypeDLFPM Coarse (Tapped)M Coarse
(Stepped and Tapped)
NV
Hole Diameter

Hole Depth
Tapped Type
SFIT
SSFIT
PSFIT
PSSFIT
Stepped and Tapped Type
SFIG
SSFIG
PSFIG
PSSFIG
1225~10002≤F≤Px46~10456845648910000.3 or Less0.5 or Less
1325~10006~11456845684510111000
1525~10006~13456810456810451000
1630~12006~1445681045681045612131200
1830~12008~16456810124568101245612001.0 or Less
2030~12008~1745681012456810125681016171200
2535~12008~224568101216456810121668101220211200
3035~15009~276810121620246810121620246810121500
[ ! ]L (Y)>Mx2.5+4+ℓ+Nx1.5+4 is required to have effective thread length. · One End Stepped and Tapped [ ! ]P dimensions require M+3≤P.
Coarse Thread Dimension
MPitch
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5
■One End Threaded, One End Threaded with O.D. same as Shaft O.D.
Part Number1mm IncrementSelectionPilot Dimensions(Y)Max.RC
TypeDLFB (Threaded)B (One End Threaded with O.D. same as Shaft O.D.)PNV
Hole Diameter

Hole Depth
Threaded Type
SFIN
SSFIN
PSFIN
PSSFIN
One End Threaded with O.D. same as Shaft O.D.
SFIQ
SSFIQ
PSFIQ
PSSFIQ
[ ! ]Shafts with O.D. same as Shaft O.D. are available for * sizes only.
*1225~9982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3
2≤B≤Px5


[ ! ]For One End Threaded with O.D. same as Shaft O.D., L dimensions have priority, thus the effective thread length will be B-(Pitchx2).
568101248910000.3 or Less0.5 or Less
1325~99856810124510111000
1525~9985681012451000
*1625~119856810121645612131200
1825~11985681012164561200
*2025~1198681012162056810161712001.0 or Less
2525~11988101216202468101220211200
*3025~149881012162024306810121500
[ ! ]Full length L requires Nx2.5+ℓ≤L.

Alterations

Shafts -Tapped Pilot-:Related Image
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
PSFIG12-[25-1000/1]-F[2-40/1]-P[6-10/1]-M[4,​5,​6]-N4
PSFIG13-[25-1000/1]-F[2-44/1]-P[6-11/1]-M[4,​5,​6,​8]-N[4,​5]
PSFIG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-M[4,​5,​6,​8,​10]-N[4,​5]
PSFIG16-[30-1200/1]-F[2-56/1]-P[6-14/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6]
PSFIG18-[30-1200/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6]
PSFIG20-[30-1200/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-N[5,​6,​8,​10]
PSFIG25-[35-1200/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-N[6,​8,​10,​12]
PSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
PSFIN12-[25-998/1]-F[2-60/1]-B[3-55/1]-P[5,​6,​8,​10,​12]-N4
PSFIN12-[25-998/1]-F[2-60/1]-B[3-55/1]-PMC[5,​6,​8,​10]-N4
PSFIN12-[25-998/1]-F[2-60/1]-B[3-55/1]-PMS10-N4
PSFIN13-[25-998/1]-F[2-60/1]-B[3-55/1]-P[5,​6,​8,​10,​12]-N[4,​5]
PSFIN13-[25-998/1]-F[2-60/1]-B[3-55/1]-PMC[5,​6,​8,​10,​12]-N[4,​5]
PSFIN13-[25-998/1]-F[2-60/1]-B[3-55/1]-PMS10-N[4,​5]
PSFIN15-[25-998/1]-F[2-60/1]-B[3-55/1]-P[5,​6,​8,​10,​12]-N[4,​5]
PSFIN15-[25-998/1]-F[2-60/1]-B[3-55/1]-PMC[5,​6,​8,​10,​12]-N[4,​5]
PSFIN15-[25-998/1]-F[2-60/1]-B[3-55/1]-PMS[10,​12]-N[4,​5]
PSFIN16-[25-1198/1]-F[2-80/1]-B[3-75/1]-P[5,​6,​8,​10,​12,​16]-N[4,​5,​6]
PSFIN16-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMC[5,​6,​8,​10,​12,​15]-N[4,​5,​6]
PSFIN16-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMS[10,​12,​14]-N[4,​5,​6]
PSFIN18-[25-1198/1]-F[2-80/1]-B[3-75/1]-P[5,​6,​8,​10,​12,​16]-N[4,​5,​6]
PSFIN18-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMC[5,​6,​8,​10,​12,​15,​17]-N[4,​5,​6]
PSFIN18-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMS[10,​12,​14]-N[4,​5,​6]
PSFIN20-[25-1198/1]-F[2-100/1]-B[3-95/1]-P[6,​8,​10,​12,​16,​20]-N[5,​6,​8,​10]
PSFIN20-[25-1198/1]-F[2-100/1]-B[3-95/1]-PMC[6,​8,​10,​12,​15,​17]-N[5,​6,​8,​10]
PSFIN20-[25-1198/1]-F[2-100/1]-B[3-95/1]-PMS[10,​12,​14,​18]-N[5,​6,​8,​10]
PSFIN25-[25-1198/1]-F[2-120/1]-B[3-115/1]-P[8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
PSFIN25-[25-1198/1]-F[2-120/1]-B[3-115/1]-PMC[8,​10,​12,​15,​17,​20]-N[6,​8,​10,​12]
PSFIN25-[25-1198/1]-F[2-120/1]-B[3-115/1]-PMS[10,​12,​14,​18]-N[6,​8,​10,​12]
PSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-P[8,​10,​12,​16,​20,​24,​30]-N[6,​8,​10,​12]
PSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMC[8,​10,​12,​15,​17,​20,​25]-N[6,​8,​10,​12]
PSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMS[10,​12,​14,​18]-N[6,​8,​10,​12]
PSFIQ12-[25-998/1]-B[3-55/1]-N4
PSFIQ16-[25-1198/1]-B[3-75/1]-N[4,​5,​6]
PSFIQ20-[25-1198/1]-B[3-95/1]-N[5,​6,​8,​10]
PSFIQ30-[25-1498/1]-B[3-145/1]-N[6,​8,​10,​12]
PSFIT12-[25-1000/1]-M[4,​5,​6,​8]-N4
PSFIT12-[25-1000/1]-MSC8-N4
PSFIT13-[25-1000/1]-M[4,​5,​6,​8]-N[4,​5]
PSFIT13-[25-1000/1]-MSC8-N[4,​5]
PSFIT15-[25-1000/1]-M[4,​5,​6,​8,​10]-N[4,​5]
PSFIT15-[25-1000/1]-MSC[6,​8,​10]-N[4,​5]
PSFIT16-[30-1200/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6]
PSFIT16-[30-1200/1]-MSC[8,​10]-N[4,​5,​6]
PSFIT18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6]
PSFIT18-[30-1200/1]-MSC[8,​10,​12]-N[4,​5,​6]
PSFIT20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-N[5,​6,​8,​10]
PSFIT20-[30-1200/1]-MSC[8,​10,​12,​14]-N[5,​6,​8,​10]
PSFIT25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-N[6,​8,​10,​12]
PSFIT25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-N[6,​8,​10,​12]
PSFIT30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
PSFIT30-[35-1500/1]-MSC[8,​10,​12,​14,​18]-N[6,​8,​10,​12]
PSSFIG12-[25-1000/1]-F[2-40/1]-P[6-10/1]-M[4,​5,​6]-N4
PSSFIG13-[25-1000/1]-F[2-44/1]-P[6-11/1]-M[4,​5,​6,​8]-N[4,​5]
PSSFIG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-M[4,​5,​6,​8,​10]-N[4,​5]
PSSFIG16-[30-1200/1]-F[2-56/1]-P[6-14/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6]
PSSFIG18-[30-1200/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6]
PSSFIG20-[30-1200/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-N[5,​6,​8,​10]
PSSFIG25-[35-1200/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-N[6,​8,​10,​12]
PSSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
Part NumberVolume DiscountDays to Ship RoHSBasic Shape Shaft Dia. D
(mm)
End Shape (Left) Material Heat Treated Surface Finish Length L
(mm)
End Section Type B
(mm)
Coarse Thread [M]
(mm)
F
(mm)
Fine Threads [MSC]
(mm)
N
(mm)
P
(mm)
Thread (Coarse) [P]
(mm)
Thread (Fine) [PMS]
(mm)
Thread (Super-Fine) [PMC]
(mm)

5 Days or more

CompliantStraight12Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Stepped and Tapped Shafts-4 ~ 62 ~ 40-46 ~ 10---

5 Days or more

CompliantStraight13Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Stepped and Tapped Shafts-4 ~ 82 ~ 44-4 ~ 56 ~ 11---

5 Days or more

CompliantStraight15Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Stepped and Tapped Shafts-4 ~ 102 ~ 52-4 ~ 56 ~ 13---

5 Days or more

CompliantStraight16Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Stepped and Tapped Shafts-4 ~ 102 ~ 56-4 ~ 66 ~ 14---

5 Days or more

CompliantStraight18Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Stepped and Tapped Shafts-4 ~ 122 ~ 64-4 ~ 68 ~ 16---

5 Days or more

CompliantStraight20Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Stepped and Tapped Shafts-4 ~ 122 ~ 68-5 ~ 108 ~ 17---

5 Days or more

CompliantStraight25Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 1200One End Stepped and Tapped Shafts-4 ~ 162 ~ 88-6 ~ 128 ~ 22---

5 Days or more

CompliantStraight30Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 1500One End Stepped and Tapped Shafts-6 ~ 242 ~ 108-6 ~ 129 ~ 27---

5 Days or more

CompliantOne End Stepped12Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4-5 ~ 12--

5 Days or more

CompliantOne End Stepped12Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4---5 ~ 10

5 Days or more

CompliantOne End Stepped12Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4--10-

5 Days or more

CompliantOne End Stepped13Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4 ~ 5-5 ~ 12--

5 Days or more

CompliantOne End Stepped13Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4 ~ 5---5 ~ 12

5 Days or more

CompliantOne End Stepped13Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4 ~ 5--10-

5 Days or more

CompliantOne End Stepped15Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4 ~ 5-5 ~ 12--

5 Days or more

CompliantOne End Stepped15Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4 ~ 5---5 ~ 12

5 Days or more

CompliantOne End Stepped15Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded3 ~ 55-2 ~ 60-4 ~ 5--10 ~ 12-

5 Days or more

CompliantOne End Stepped16Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 75-2 ~ 80-4 ~ 6-5 ~ 16--

5 Days or more

CompliantOne End Stepped16Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 75-2 ~ 80-4 ~ 6---5 ~ 15

5 Days or more

CompliantOne End Stepped16Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 75-2 ~ 80-4 ~ 6--10 ~ 14-

5 Days or more

CompliantOne End Stepped18Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 75-2 ~ 80-4 ~ 6-5 ~ 16--

5 Days or more

CompliantOne End Stepped18Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 75-2 ~ 80-4 ~ 6---5 ~ 17

5 Days or more

CompliantOne End Stepped18Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 75-2 ~ 80-4 ~ 6--10 ~ 14-

5 Days or more

CompliantOne End Stepped20Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 95-2 ~ 100-5 ~ 10-6 ~ 20--

5 Days or more

CompliantOne End Stepped20Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 95-2 ~ 100-5 ~ 10---6 ~ 17

5 Days or more

CompliantOne End Stepped20Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 95-2 ~ 100-5 ~ 10--10 ~ 18-

5 Days or more

CompliantOne End Stepped25Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 115-2 ~ 120-6 ~ 12-8 ~ 24--

5 Days or more

CompliantOne End Stepped25Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 115-2 ~ 120-6 ~ 12---8 ~ 20

5 Days or more

CompliantOne End Stepped25Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded3 ~ 115-2 ~ 120-6 ~ 12--10 ~ 18-

5 Days or more

CompliantOne End Stepped30Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1498One End Threaded3 ~ 145-2 ~ 150-6 ~ 12-8 ~ 30--

5 Days or more

CompliantOne End Stepped30Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1498One End Threaded3 ~ 145-2 ~ 150-6 ~ 12---8 ~ 25

5 Days or more

CompliantOne End Stepped30Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1498One End Threaded3 ~ 145-2 ~ 150-6 ~ 12--10 ~ 18-

5 Days or more

CompliantStraight12Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 998One End Threaded Shafts with O.D. same as Shaft O.D.3 ~ 55---4----

5 Days or more

CompliantStraight16Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded Shafts with O.D. same as Shaft O.D.3 ~ 75---4 ~ 6----

5 Days or more

CompliantStraight20Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1198One End Threaded Shafts with O.D. same as Shaft O.D.3 ~ 95---5 ~ 10----

5 Days or more

CompliantStraight30Threaded[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1498One End Threaded Shafts with O.D. same as Shaft O.D.3 ~ 145---6 ~ 12----

5 Days or more

CompliantStraight12Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Tapped-4 ~ 8--4----

5 Days or more

CompliantStraight12Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Tapped---84----

5 Days or more

CompliantStraight13Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Tapped-4 ~ 8--4 ~ 5----

5 Days or more

CompliantStraight13Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Tapped---84 ~ 5----

5 Days or more

CompliantStraight15Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Tapped-4 ~ 10--4 ~ 5----

5 Days or more

CompliantStraight15Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000One End Tapped---6 ~ 104 ~ 5----

5 Days or more

CompliantStraight16Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Tapped-4 ~ 10--4 ~ 6----

5 Days or more

CompliantStraight16Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Tapped---8 ~ 104 ~ 6----

5 Days or more

CompliantStraight18Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Tapped-4 ~ 12--4 ~ 6----

5 Days or more

CompliantStraight18Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Tapped---8 ~ 124 ~ 6----

5 Days or more

CompliantStraight20Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Tapped-4 ~ 12--5 ~ 10----

5 Days or more

CompliantStraight20Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200One End Tapped---8 ~ 145 ~ 10----

5 Days or more

CompliantStraight25Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 1200One End Tapped-4 ~ 16--6 ~ 12----

5 Days or more

CompliantStraight25Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 1200One End Tapped---8 ~ 186 ~ 12----

5 Days or more

CompliantStraight30Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 1500One End Tapped-6 ~ 24--6 ~ 12----

5 Days or more

CompliantStraight30Tapped[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 1500One End Tapped---8 ~ 186 ~ 12----

5 Days or more

CompliantStraight12Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome25 ~ 1000One End Stepped and Tapped Shafts-4 ~ 62 ~ 40-46 ~ 10---

5 Days or more

CompliantStraight13Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome25 ~ 1000One End Stepped and Tapped Shafts-4 ~ 82 ~ 44-4 ~ 56 ~ 11---

5 Days or more

CompliantStraight15Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome25 ~ 1000One End Stepped and Tapped Shafts-4 ~ 102 ~ 52-4 ~ 56 ~ 13---

5 Days or more

CompliantStraight16Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome30 ~ 1200One End Stepped and Tapped Shafts-4 ~ 102 ~ 56-4 ~ 66 ~ 14---

5 Days or more

CompliantStraight18Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome30 ~ 1200One End Stepped and Tapped Shafts-4 ~ 122 ~ 64-4 ~ 68 ~ 16---

5 Days or more

CompliantStraight20Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome30 ~ 1200One End Stepped and Tapped Shafts-4 ~ 122 ~ 68-5 ~ 108 ~ 17---

5 Days or more

CompliantStraight25Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome35 ~ 1200One End Stepped and Tapped Shafts-4 ~ 162 ~ 88-6 ~ 128 ~ 22---

5 Days or more

CompliantStraight30Tapped[Stainless Steel] 440C Stainless Steel[Induction Hardened] Induction Hardened 56HRC~Hard Chrome35 ~ 1500One End Stepped and Tapped Shafts-6 ~ 242 ~ 108-6 ~ 129 ~ 27---

Loading...

Lead Time

Shafts -Tapped Pilot-:Related Image

More Information

[ ! ]Shaft End Machined Area (Effective Thread Length + Approx. 10mm) Annealing may lower hardness.
[ ! ]Circularity, Straightness, Perpendicularity Concentricity, Changes in Hardness >> Click here

Example

Shafts -Tapped Pilot-:Related Image
 

Basic Information

End Shape (Right) Pilot with Tap Shaft End Perpendicularity Perpendicularity (0.2) Shaft Fits Tolerance g6

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

MISUMI Unit Example related to this product

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET