[Motorized] XY-Axis - Linear Ball

[Motorized] XY-Axis - Linear Ball
  • New Products

XY-Axis Type with High Rigidity, Compactness in width and Space-saving design for the overall length.

[Motorized] XY-Axis - Linear Ball:Related Image
[ ! ]For the detailed dimensions of CAVE-X Positioner with the Motor PA installed, see the applicable CAD data.

[ M ] Material: 440C Stainless Steel
[ S ] Surface Treatment: Electroless Nickel Plating
[ A ] Accessory: SCB4-12 (4 pcs.)

Specifications

Part Number - Motor - Cable
XYCV620
XYCV630
-
-
C
PA
-
-
N
P
Part Number Motor Cable Mechanical Standards Accuracy Standards
Type No. Stage Surface
(mm)
Travel Distance
(mm)
Weight*2
(kg)
Unidirectional Positioning Accuracy (for a single axis stage horizontally placed) Pitching Yawing
XYCV 620 C(Standard)
F(High Torque)
G(High Resolution)
MA*1 (With Electromagnetic Brake)
PA*2 (α-Step)
N(Cable not included (separately sold))
M(For Motor with Electromagnetic Brake)
P(For α-xt)
[ ! ]For combination of motors and cables, see the table below.
60×60 20 1.6 5µm 20'' 15''
630 60×70 30 1.8
*1.For motor options MA and PA, the driver is included in the set. With motor options MA and PA, the selectable cable options are M and P, respectively and exclusively. Note that the cable option N is not selectable.
*2. The value is for C Type of Motor.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
XYCV620-C-N
XYCV620-F-N
XYCV620-G-N
XYCV620-PA-P
XYCV630-C-N
XYCV630-F-N
XYCV630-G-N
XYCV630-PA-P
Part NumberVolume DiscountDays to Ship Motor, Motor Characteristics Resolution
(µm)
Table Length
(mm)
Stroke (X Distance)
(mm)
Stroke (Y Distance)
(mm)
Maximum Velocity
(mm/sec)
Table Straightness
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Cable

16 Days

5-Phase Stepping Motor2μm6020202030.080.050.05Cable not included

16 Days

5-Phase Stepping Motor High Torque2μm6020203030.080.050.05Cable not included

16 Days

5-Phase Stepping Motor High Resolution1μm6020202030.080.050.05Cable not included

10 Days

α Stepping Motor1μm6020202030.080.050.05Cable for α-Step Motor

10 Days

5-Phase Stepping Motor2μm7030302030.080.050.05Cable not included

10 Days

5-Phase Stepping Motor High Torque2μm7030303030.080.050.05Cable not included

10 Days

5-Phase Stepping Motor High Resolution1μm7030302030.080.050.05Cable not included

10 Days

α Stepping Motor1μm7030302030.080.050.05Cable for α-Step Motor

Loading...

  1. 1

More Information

[Motorized] XY-Axis - Linear Ball:Related Image
[Motorized] XY-Axis - Linear Ball:Related Image
[Motorized] XY-Axis - Linear Ball:Related Image
[Motorized] XY-Axis - Linear Ball:Related Image
■Motor/Cable Application Table
Motor Cable
C,F,G N (Not Provided)
MA M
PA P
[ ! ]For the cable for C, F or G, see MSCB_ on P.1-1735-95
■Max. speed
Motor (mm/sec)
C 30
F 35
G 25
MA 25
PA 40
[ ! ]Note that the speed and positioning time will vary depending on the usage conditions.
The values shown here are MISUMI’s reference values. Operation at these values is not guaranteed.
■Common Specifications
Feed Screw Ball Screw Ø8, Lead 1
Guide Linear Ball Guide
Resolution *3 Full 2µm/Pulse (1µm/Pulse) *4
Half 1µm/Pulse (0.5µm/Pulse) *4
Fine Feed
(upon 1/20 partitioned)
0.1µm(0.05µm)
Max. Speed *5 20mm/sec(30mm/sec)*6
(Pulse Rate: 5kHz)
Positioning repeatability ±0.5µm
Load Capacity *7 39.2N
Lost Motion 1µm
Backlash 1µm
Straightness 3µm
Parallelism 15µm
Motion Parallelism 10µm
[ ! ]The above specifications are for a single axis.
*3 This represents the travel distance of stage per one pulse signal.
*4 The values in ( ) are for Motor Option G (High Resolution).
*5 This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied. (The value differs depending on the current driving controller and the current load.)
*6 The values in ( ) are for Motor Option F (High Torque).
[Motorized] XY-Axis - Linear Ball:Related Image The value differs depending on the motor option.
*7 The above load capacity value is for XY-Axis.
■Electrical Specifications
Motor C F G MA PA
Standard High Torque High Resolution With Electromagnetic Brake Tuningless
Motor Type 5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.) α-Step Motor
Step Angle 0.72° 0.72° 0.36° 0.72° 0.36° (When 1000P/R is set)
Connector Applicable Receptacle Connector HR10A-10P-12S(73)(Hirose Electric Co., LTD.) 5559-06R-210
(Molex Japan LLC)
43020-1000
(Molex Japan LLC)
Sensor Limit Sensor Provided
Home Sensor Photomicrosensor: EE-SX4134 (OMRON Corp.)
Near Home Sensor -
Power Supply Voltage DC5~24V ±10%
Current Consumption 60mA or less in Total
Control Output NPN Open Collector Output DC5~24V, 8mA or less
Residual Voltage 0.3V or less (when load current is 2mA)
Output Logic Detecting (Dark): Output Transistor OFF (Non-Conducting)
■Recommended Homing Method
Type3 After detection is executed in the CCW direction, the process of detecting in the CCW direction is begun based on the ORG signal.
Type4 After detection is executed in the CW direction, the process of detecting in the CW direction is begun based on the ORG signal.
Type9 After Type 3 is executed, the process of detecting in the CCW direction is begun based on the TIMING signal.
Type10 After Type 4 is executed, the process of detecting in the CW direction is begun based on the TIMING signal.
 

Basic Information

Type XY-Axis Motorized Stages Material 440C Stainless Steel Guide Linear Ball Guide
Table feeding methods Ball screw Table width(mm) 60 Surface Treatment Electroless Nickel Plating
Through Hole (Table Center Hole) No Load Capacity (Range)(N) 30.1~50 Allowable Load(N) 39.2
Positioning Accuracy(µm) 5 Sensors Limit+Home

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support