Motorized Z-Axis - Cross Roller, Low Profile, ZMPTG Series (MISUMI)

[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
[ ! ]See the CAD data for detailed dimensions.
[ ! ]The sensor cover position shown on the diagram is L (Standard).
[ M ] Material Aluminum Alloy
[ S ] Surface Treatment Clear Anodize (ZMPTG725)
Black Anodize (ZMPTG830/1040/1250)
[ A ] Accessory ZMPTG725/830 SCB4-6
ZMPTG1040 SCB4-10
ZMPTG1250 SCB6-12


Part Number-Sensor-Cable
Part NumberSensorCableMechanical StandardsAccuracy Standards
TypeNo.Stage Surface (mm)Travel Distance (mm)Weight (kg)Unidirectional Positioning AccuracyPitchingYawing
ZMPTG725L (Standard)
N (Not Provided)
The cable is separately sold.
70×70251.315µm or less20" or less15" or less

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Part Number
Part NumberVolume DiscountDays to Ship Table Length
Table width
Stroke (Z Distance)
Surface Treatment Load Capacity (Range)
Allowable Load
Maximum Velocity
Table Straightness
Moment Rigidity (Pitching)
Moment Rigidity (Yawing)
Moment Rigidity (Rolling)
Sensor selection

10 Days

10010040Black Anodize50.1~10073.51020.040.040.02Left

10 Days

10010040Black Anodize50.1~10073.51020.040.040.02Right

10 Days

12012050Black Anodize50.1~10073.51020.030.020.02Left

10 Days

12012050Black Anodize50.1~10073.51020.030.020.02Right

10 Days

707025Clear Anodize30.1~50491020.090.070.07Left

10 Days

707025Clear Anodize30.1~50491020.090.070.07Right

10 Days

808030Black Anodize50.1~10073.51020.050.040.03Left

10 Days

808030Black Anodize50.1~10073.51020.050.040.03Right


  1. 1

More Information

[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
■Common Specifications
Feed ScrewBall Screw Ø6, Lead 1Ball Screw Ø8, Lead 1
GuideCross Roller Guide
Fine0.05µm (upon 1/20 partitioned)
Max. Speed10mm/sec
Positioning repeatabilityWithin ±0.3µm
Load Capacity *149N73.5N
Lost Motion1µm or less
Backlash0.5µm or less
Parallelism30µm or less
Motion Parallelism10µm or less15µm or less
[ ! ]The above specifications are for single-axis horizontal mounting orientation.
*1. Only for load capacity, the above specifications are for Z-Axis.
■Electrical Specifications
MotorType5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)
Step Angle0.36°
ConnectorApplicable Receptacle ConnectorHR10A-10P-12S (73) (Hirose Electric Co., LTD.)
SensorLimit SensorProvided
Slit Home Origin Sensor (ORG2)Provided
Home Position Sensor (ORG1)Provided
Part NumberPhoto Sensor PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.)
Power Supply VoltageDC5~24V ±10%
Current Consumption60mA or less (15mA per Sensor)
Control OutputNPN Open Collector Output DC30V or less, 50mA or less
Residual Voltage 2V or less (when load current is 50mA)
Residual Voltage 1V or less (when load current is 16mA)
Output LogicLimit, ORG1: While Detecting (Dark), Output Transistor OFF (Non-Conducting)
ORG2: While Detecting (Light In), Output Transistor OFF (Non-Conducting)
[ ! ]On the XMPTG Series, conversion for output logic is available for the Home Sensor.
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.

Basic Information

Type Z-Axis Motorized Stages Resolution(µm) 1μm Material Aluminum
Guide Cross Roller Table feeding methods Ball screw Through Hole (Table Center Hole) No
Positioning Accuracy(µm) 15 Motor type b:Stepper Motor (5-Phase Standard) Cable Cable not included

Additional Products in this Category

Customers Who Viewed This Item Also Viewed