Precision Hollow Linear Shafts - Both Ends Tapped

シャフト 両端めねじパイフスパナ溝付き゜タイプ:Related Image
[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating
 >>P.128
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 15mm from wrench flats machined ends.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111 
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Annealing required for wrench flats machining and shaft end threading (effective thread length + approx. 10mm) may lower hardness. >>P.112
Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
Both Ends TappedBoth Ends Tapped with Wrench Flats
SPJWSPWR52100 Bearing SteelEffective Hardened Depth of Induction Hardened >>P.112
52100 Bearing Steel 58HRC~
440C Stainless Steel 56HRC~
-
SSPJWSSPWR440C Stainless Steel
PSPJWPSPWR52100 Bearing SteelHard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
RSPJWRSPWR52100 Bearing SteelLow Temp. Black Chrome Plating

Specifications

• Both Ends Tapped Hollow Shafts
Part Number-L-M-N-SC
SPJW20
SPWR30
-
-
500
680
-
-
M16
M20
-
-
N16
N20

-

SC10
■Both Ends Tapped Hollow Shafts
Part NumberL
1mm Increment
M (Coarse Thread)
N (Coarse Thread)
D Tol.dC
TypeD
Both Ends Tapped Hollow Shafts
SPJW
SSPJW (* marked sizes only)
PSPJW
620~6003    -0.004
-0.012
20.5 or Less
*820~800 (300)4*5   -0.005
-0.014
3(3)0.5 or Less
*1020~800 (400)5*6   -0.005
-0.014
4(4)0.5 or Less
*1232~1000 (500) *8*T1 (RC1/8)-0.006
-0.017
6(5)0.5 or Less
*1340~1000 (500) *10*T1 (RC1/8)-0.006
-0.017
7(5)0.5 or Less
*1648~1200 (600) *12*T2 (RC1/4)-0.006
-0.017
10(6)0.5 or Less
*2064~1200 (800) *16*T3 (RC3/8)-0.007
-0.020
14(8)1.0 or Less
*2580~1200 (1000) *20   -0.007
-0.020
16(10)1.0 or Less
*3080~1500 (1000) *20   -0.007
-0.020
17(12)1.0 or Less
3596~1500  24  -0.009
-0.025
191.0 or Less
4096~1500  2430 -0.009
-0.025
201.0 or Less
50120~1500   30 -0.009
-0.025
261.0 or Less

Part NumberL
1mm Increment
M (Coarse Thread)
N (Coarse Thread)
D Tol.dC
TypeD
Both Ends Tapped Hollow Shafts
Low Temp. Black Chrome Plating
RSPJW
620~5003    -0.004
-0.012
20.5 or Less
820~50045   -0.005
-0.014
30.5 or Less
1020~50056   -0.005
-0.014
40.5 or Less
1232~500 8T1 (RC1/8)-0.006
-0.017
60.5 or Less
1340~500 10T1 (RC1/8)-0.006
-0.017
70.5 or Less
1648~500 12T2 (RC1/4)-0.006
-0.017
100.5 or Less
2064~500 16T3 (RC3/8)-0.007
-0.020
141.0 or Less
2580~500 20   -0.007
-0.020
161.0 or Less
3080~500 20   -0.007
-0.020
171.0 or Less
Part NumberL
1mm Increment
M (Coarse Thread), N (Coarse Thread)Wrench Flats DimensionsD Tol.dC
TypeDSCW1
Both Ends Tapped Hollow Shafts
with Wrench Flats
SPWR
SSPWR (* marked sizes only)
PSPWR
620~6003    SC=1mm Increment
[ ! ]When D≤25
SC+1≤L-Nx2
SC≥Mx2
[ ! ]When D≥30
SC+1≤L
SC≥0


[ ! ]
Details of Wrench Flats
  P.112
58-0.004
-0.012
20.5 or Less
* 820~800 (300)4* 5   78-0.005
-0.014
3 (3)0.5 or Less
* 1020~800 (400)5* 6   88-0.005
-0.014
4 (4)0.5 or Less
* 1232~1000 (500) * 8*T1 (RC1/8)1010-0.006
-0.017
6 (5)0.5 or Less
* 1340~1000 (500) * 10*T1 (RC1/8)1110-0.006
-0.017
7 (5)0.5 or Less
* 1648~1200 (600) * 12*T2 (RC1/4)1410-0.006
-0.017
10 (6)0.5 or Less
* 2064~1200 (800) * 16*T3 (RC3/8)1710-0.007
-0.020
14 (8)1.0 or Less
* 2580~1200 (1000) * 20   2210-0.007
-0.020
16 (10)1.0 or Less
* 3080~1500 (1000) * 20   2715-0.007
-0.020
17 (12)1.0 or Less
3596~1500  24  3015-0.009
-0.025
191.0 or Less
4096~1500  2430 3620-0.009
-0.025
201.0 or Less
50120~1500   30 4120-0.009
-0.025
261.0 or Less

Part NumberL
1mm Increment
M (Coarse Thread), N (Coarse Thread)Wrench Flats DimensionsD Tol.dC
TypeDSCW1
Both Ends Tapped Hollow Shafts
with Wrench Flats
Low Temp. Black Chrome Plating
RSPWR
620~5003    SC=1mm Increment
[ ! ]When D≤25
SC+1≤L-Nx2
SC≥Mx2
[ ! ]When D≥30
SC+1≤L
SC≥0


[ ! ]
Details of Wrench Flats
  P.112
58-0.004
-0.012
20.5 or Less
820~50045   78-0.005
-0.014
30.5 or Less
1020~50056   88-0.005
-0.014
40.5 or Less
1232~500 8T1 (RC1/8)1010-0.006
-0.017
60.5 or Less
1340~500 10T1 (RC1/8)1110-0.006
-0.017
70.5 or Less
1648~500 12T2 (RC1/4)1410-0.006
-0.017
100.5 or Less
2064~500 16T3 (RC3/8)1710-0.007
-0.020
141.0 or Less
2580~500 20   2210-0.007
-0.020
161.0 or Less
3080~500 20   2715-0.007
-0.020
171.0 or Less
[ ! ]When T1, T2 or T3 is selected as M or N, tapered thread machining is applied. (Ordering Code: MT1, NT1) [ ! ]L requires Mx2+Nx2≤L.
[ ! ]When Mx25+4+Nx2.5+4≤L, tap pilot holes may go through. [ ! ]When L≤Mx2+Nx2, effective depth of larger diameter tap has priority.
[ ! ]Only * marked D, M and N dimensions are applicable to Stainless Steel Shafts. L and d dimensions in ( ) are applicable.

Alterations

シャフト 両端めねじパイフスパナ溝付き゜タイプ:Related Image

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Loading...
Part Number
PSPJW6-[20-600/1]-M3-N3
PSPJW8-[20-800/1]-M[4,​5]-N[4,​5]
PSPJW10-[20-800/1]-M[5,​6]-N[5,​6]
PSPJW12-[20-1000/1]-M8-N8
PSPJW12-[20-1000/1]-M8-NT1
PSPJW12-[20-1000/1]-MT1-N8
PSPJW12-[20-1000/1]-MT1-NT1
PSPJW13-[25-1000/1]-M10-N10
PSPJW13-[25-1000/1]-M10-NT1
PSPJW13-[25-1000/1]-MT1-N10
PSPJW13-[25-1000/1]-MT1-NT1
PSPJW16-[30-1200/1]-M12-N12
PSPJW16-[30-1200/1]-M12-NT2
PSPJW16-[30-1200/1]-MT2-N12
PSPJW16-[30-1200/1]-MT2-NT2
PSPJW20-[30-1200/1]-M16-N16
PSPJW20-[30-1200/1]-M16-NT3
PSPJW20-[30-1200/1]-MT3-N16
PSPJW20-[30-1200/1]-MT3-NT3
PSPJW25-[35-1200/1]-M20-N20
PSPJW30-[35-1500/1]-M20-N20
PSPJW35-[96-1500/1]-M24-N24
PSPJW40-[96-1500/1]-M[24,​30]-N[24,​30]
PSPJW50-[120-1500/1]-M30-N30
PSPWR6-[20-600/1]-M3-N3-SC[6-586/1]
PSPWR8-[20-800/1]-M[4,​5]-N[4,​5]-SC[8-784/1]
PSPWR10-[20-800/1]-M[5,​6]-N[5,​6]-SC[10-782/1]
PSPWR12-[32-1000/1]-M8-N8-SC[16-972/1]
PSPWR12-[32-1000/1]-M8-NT1-SC[16-972/1]
PSPWR12-[32-1000/1]-MT1-N8-SC[16-972/1]
PSPWR12-[32-1000/1]-MT1-NT1-SC[16-972/1]
PSPWR13-[40-1000/1]-M10-N10-SC[20-970/1]
PSPWR13-[40-1000/1]-M10-NT1-SC[20-970/1]
PSPWR13-[40-1000/1]-MT1-N10-SC[20-970/1]
PSPWR13-[40-1000/1]-MT1-NT1-SC[20-970/1]
PSPWR16-[48-1200/1]-M12-N12-SC[24-1166/1]
PSPWR16-[48-1200/1]-M12-NT2-SC[24-1166/1]
PSPWR16-[48-1200/1]-MT2-N12-SC[24-1166/1]
PSPWR16-[48-1200/1]-MT2-NT2-SC[24-1166/1]
PSPWR20-[64-1200/1]-M16-N16-SC[32-1158/1]
PSPWR20-[64-1200/1]-M16-NT3-SC[32-1158/1]
PSPWR20-[64-1200/1]-MT3-N16-SC[32-1158/1]
PSPWR20-[64-1200/1]-MT3-NT3-SC[32-1158/1]
PSPWR25-[80-1200/1]-M20-N20-SC[40-1150/1]
PSPWR30-[80-1500/1]-M20-N20-SC[0-1485/1]
PSPWR35-[96-1500/1]-M24-N24-SC[0-1485/1]
PSPWR40-[96-1500/1]-M[24,​30]-N[24,​30]-SC[0-1480/1]
PSPWR50-[120-1500/1]-M30-N30-SC[0-1480/1]
RSPJW6-[20-500/1]-M3-N3
RSPJW8-[20-500/1]-M[4,​5]-N[4,​5]
RSPJW10-[20-500/1]-M[5,​6]-N[5,​6]
RSPJW12-[32-500/1]-M8-N8
RSPJW12-[32-500/1]-M8-NT1
RSPJW12-[32-500/1]-MT1-N8
RSPJW12-[32-500/1]-MT1-NT1
RSPJW13-[40-500/1]-M10-N10
RSPJW13-[40-500/1]-M10-NT1
RSPJW13-[40-500/1]-MT1-N10
RSPJW13-[40-500/1]-MT1-NT1
RSPJW16-[48-500/1]-M12-N12
Part NumberVolume DiscountDays to Ship RoHSShaft Dia. D
(mm)
Material Heat Treated Surface Finish Length L
(mm)
Coarse Thread [M]
(mm)
N
(mm)
SC
(mm)
Tapered Thread Machining [MT] 1 (RC1/8) 2 (RC1/4) 3 (RC3/8) Tapered Thread Machining [NT] 1 (RC1/8) 2 (RC1/4) 3 (RC3/8)

4 Days

66[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 60033---

4 Days

68[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 8004 ~ 54 ~ 5---

4 Days

610[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 8005 ~ 65 ~ 6---

4 Days

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 100088---

4 Days

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 10008---1

4 Days

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 1000-8-1-

4 Days

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 1000---11

4 Days

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 10001010---

4 Days

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 100010---1

4 Days

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000-10-1-

4 Days

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome25 ~ 1000---11

4 Days

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 12001212---

4 Days

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 120012---2

4 Days

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200-12-2-

4 Days

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200---22

4 Days

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 12001616---

4 Days

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 120016---3

4 Days

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200-16-3-

4 Days

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome30 ~ 1200---33

4 Days

625[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 12002020---

4 Days

630[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome35 ~ 15002020---

5 Days or more

635[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome96 ~ 15002424---

5 Days or more

640[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome96 ~ 150024 ~ 3024 ~ 30---

5 Days or more

650[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome120 ~ 15003030---

5 Days or more

66[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 600336 ~ 586--

5 Days or more

68[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 8004 ~ 54 ~ 58 ~ 784--

5 Days or more

610[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome20 ~ 8005 ~ 65 ~ 610 ~ 782--

5 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome32 ~ 10008816 ~ 972--

5 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome32 ~ 10008-16 ~ 972-1

5 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome32 ~ 1000-816 ~ 9721-

5 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome32 ~ 1000--16 ~ 97211

5 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome40 ~ 1000101020 ~ 970--

5 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome40 ~ 100010-20 ~ 970-1

5 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome40 ~ 1000-1020 ~ 9701-

5 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome40 ~ 1000--20 ~ 97011

5 Days or more

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome48 ~ 1200121224 ~ 1166--

5 Days or more

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome48 ~ 120012-24 ~ 1166-2

5 Days or more

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome48 ~ 1200-1224 ~ 11662-

5 Days or more

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome48 ~ 1200--24 ~ 116622

5 Days or more

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome64 ~ 1200161632 ~ 1158--

5 Days or more

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome64 ~ 120016-32 ~ 1158-3

5 Days or more

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome64 ~ 1200-1632 ~ 11583-

5 Days or more

620[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome64 ~ 1200--32 ~ 115833

5 Days or more

625[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome80 ~ 1200202040 ~ 1150--

5 Days or more

630[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome80 ~ 150020200 ~ 1485--

5 Days or more

635[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome96 ~ 150024240 ~ 1485--

5 Days or more

640[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome96 ~ 150024 ~ 3024 ~ 300 ~ 1480--

5 Days or more

650[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Hard Chrome120 ~ 150030300 ~ 1480--

10 Days or more

66[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome20 ~ 50033---

10 Days or more

68[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome20 ~ 5004 ~ 54 ~ 5---

10 Days or more

610[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome20 ~ 5005 ~ 65 ~ 6---

10 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome32 ~ 50088---

10 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome32 ~ 5008---1

10 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome32 ~ 500-8-1-

10 Days or more

612[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome32 ~ 500---11

10 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome40 ~ 5001010---

10 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome40 ~ 50010---1

10 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome40 ~ 500-10-1-

10 Days or more

613[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome40 ~ 500---11

10 Days or more

616[Steel] 52100 Bearing Steel[Induction Hardened] Induction Hardened 58HRC~Low Temperature Black Chrome48 ~ 5001212---

Loading...

Example

シャフト 両端めねじパイフスパナ溝付き゜タイプ:Related Image

Basic Information

Basic Shape Hollow End Shape (Left) Tapped End Shape (Right) Tapped
Shaft Fits Tolerance g6

Frequently Asked Questions (FAQs)

Question: Will the inner surface be hard chrome plated?
Answer: No, the inner surface will not be plated. For more information please look at: https://us.misumi-ec.com/pdf/fa/2012/p1_0097.pdf

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET