Aluminum Extrusion - 5 series, Base 20 (KHFS5-2020-4000)

Aluminum Extrusion - 5 series, Base 20:Related Image

Specifications

Part Number - L
HFS5-2020 - 800
KHFS5-2020 - 1000
KNFS5-2020 - 4000
■Configurable Length Extrusions
Type [ M ]Material [ S ]Surface Treatment Part Number L
0.5mm Increment
Mass
kg/m
Sectional Area
mm2
Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Clear Anodize HFS5-2020 50~4000 0.5 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Black Anodize HFSB5-2020 50~4000 0.5 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Clear Coating (Anodize + Clear Coating) CAF5-2020 50~4000 0.5 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Baked - on Finish (Yellow) HFSY5-2020 50~4000 0.5 183 0.742x104 0.742x104
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusions (Effective Length 4000mm, 1000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Type [ M ]Material [ S ]Surface Treatment Part Number L
mm
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Clear Anodize KHFS5-2020 4000 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Clear Anodize KHFS5-2020 1000 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Black Anodize KHFSB5-2020 4000 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Clear Coating (Anodize + Clear Coating) KCAF5-2020 4000 183 0.742x104 0.742x104
HFS A6N01SS-T5 6005A-T5 Aluminum Alloy Baked - on Finish (Yellow) KHFSY5-2020 4000 183 0.742x104 0.742x104
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)

Alterations

Aluminum Extrusion - 5 series, Base 20:Related Image

Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
KHFS5-2020-4000
Part NumberVolume DiscountDays to Ship RoHSSurface Finish L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)
Available

1 Day

CompliantClear AnodizeStandard, Fixed4000-

Loading...

  1. 1

Basic Information

Standard Extrusion Size(mm) 20 Extrusion Size 20x20 Extrusion Series 5 Series
Extrusion Type Square Number of Extrusion Slots 1 Slot-1 Slot Extrusion Type HFS
Number of Grooved Surfaces Four Side Slots Surface Milled None Material A6N01SS-T5 Aluminum Alloy
Extrusion Size - Width (A)(mm)(mm) 20 Extrusion Size - Thickness (T)(mm)(mm) 20

Please check the type/dimensions/specifications of the part KHFS5-2020-4000 in the Aluminum Extrusion - 5 series, Base 20 series.

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET