20x20 Aluminum Extrusion - 5 Series, Base 20 (MISUMI)

Specifications

Part Number-L
HFS5-2020-800
KHFS5-2020-1000
   
■Configurable Length Extrusions
Type[ M ]Material[ S ]Surface TreatmentPart NumberL
0.5mm Increment
Mass
kg/m
Sectional Area
mm2
Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSA6N01SS-T5 6005A-T5 Aluminum AlloyClear AnodizeHFS5-202050~40000.51830.742x1040.742x104
HFSA6N01SS-T5 6005A-T5 Aluminum AlloyBlack AnodizeHFSB5-202050~40000.51830.742x1040.742x104
HFSA6N01SS-T5 6005A-T5 Aluminum AlloyBaked - on Finish (Yellow)HFSY5-202050~40000.51830.742x1040.742x104
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

 

Alterations

Aluminum Extrusion - 5 series, Base 20:Related Image

Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Loading...
Part Number
CAF5-2020-[50-1800/0.5]
CAF5-2020-[1801-4000/0.5]
HFS5-2020-[50-4000/0.5]
HFSB5-2020-[50-1800/0.5]
HFSB5-2020-[1801-4000/0.5]
HFSY5-2020-[50-4000/0.5]
KHFS5-2020-1000
KHFS5-2020-4000
KHFSB5-2020-4000
Part NumberVolume DiscountDays to Ship RoHSSurface Finish L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)

4 Days

10Clear CoatingConfigurable-50 ~ 1800

4 Days

10Clear CoatingConfigurable-1801 ~ 4000

1 Day

-Clear AnodizeConfigurable-50 ~ 4000

67 Days

-Black AnodizeConfigurable-50 ~ 1800

67 Days

-Black AnodizeConfigurable-1801 ~ 4000

4 Days

10Baked-on Finish (Yellow)Configurable-50 ~ 4000
Available

Same Day

Stock

-Clear AnodizeStandard, Fixed1000-
Available

1 Day

-Clear AnodizeStandard, Fixed4000-
Available

1 Day

-Black AnodizeStandard, Fixed4000-

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 20 Extrusion Size 20x20 Extrusion Series 5 Series
Extrusion Shape Square Number of Extrusion Slots 1 Slot-1 Slot Extrusion Type HFS (Standard)
Number of Grooved Surfaces Four Side Slots Surface Milled None Material A6N01SS-T5 Aluminum Alloy
Extrusion Size - Width (A)(mm)(mm) 20 Extrusion Size - Thickness (T)(mm)(mm) 20

Frequently Asked Questions (FAQs)

Question: What is the load capacity of this extrusion?
Answer: The formulas to determine load capacity of extrusions can be found at: https://us.misumi-ec.com/pdf/fa/2010/p2431.pdf
Question: What is the length tolerance of this extrusion?
Answer: The standard length tolerance is +/-0.5mm.
Question: What is the standard surface treatment of these aluminum extrusions?
Answer: Unless specified otherwise (selecting black anodization, et.c), clear anodizing is used as a standard surface treatment to help protect the extrusion.

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed