Empowering Engineers with

Configurable Components

Our business hours are 7:00 am ~ 9:00 pm ET (Monday to Friday).

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20, Base 25

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20, Base 25

HFSP5 Series extrusion with milled top and bottom surfaces, 20mm x 20mm, 25mm x 25mm, 40mm x 40mm. They can be used for Linear Guide mounting.

Part Number Configured Part Number is shown.
Aluminum Extrusion with Milled Surfaces- 5 series, Base 20, Base 25:Related Image
Aluminum Extrusion with Milled Surfaces- 5 series, Base 20, Base 25:Related Image

Specifications

Part Number-L
HFSP5-2020-300
■Configurable Length Extrusions
Type[ M ]Material[ S ]Surface TreatmentPart NumberL
0.5mm Increment
TA
HFSA6N01SS-T5 Aluminum AlloyAnodizeHFSP5-202050~400019.220
HFSA6N01SS-T5 Aluminum AlloyAnodizeHFSP5-252550~400024.225
HFSA6N01SS-T5 Aluminum AlloyAnodizeHFSP5-404050~400039.240

Alterations

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20, Base 25:Related Image

Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686

Basic Information

Extrusion Series 5 Series Extrusion Type Square Extrusion Type HFS
Surface Finish Clear Anodize Number of Grooved Surfaces Four Side Slots Surface Milled Milled
Material A6N01SS-T5 Aluminum Alloy L Dimension Fixed, Specified Configurable

Configure

Clear All

Specification/Dimensions

  • Standard Extrusion Size(mm)

    • 20
    • 25
    • 40
  • Extrusion Size

    • 20x20
    • 25x25
    • 40x40
  • Extrusion Series

    • 5 Series
  • Extrusion Type

    • Square
  • Number of Extrusion Slots

    • 1 Slot-1 Slot
    • 2 Slots-2 Slots
  • Extrusion Type

    • HFS
  • Surface Finish

    • Clear Anodize
  • Number of Grooved Surfaces

    • Four Side Slots
  • Surface Milled

    • Milled
  • Material

    • A6N01SS-T5 Aluminum Alloy
  • Extrusion Size - Width (A)(mm)(mm)

    • 20
    • 25
    • 40
  • Extrusion Size - Thickness (T)(mm)(mm)

    • 19.2
    • 24.2
    • 39.2
  • L Dimension Fixed, Specified

    • Configurable
  • Overall Length L(mm)

    [100-1800/0.5mm increments] [1801-3000/0.5mm increments]
  • Type

    • HFSP5-2525
    • HFSP5-4040
    • HFSP5-2020
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • ALL
    • 5 Days or Less

Tech Support

Automation Components Group
TEL:800-681-7475 (ext.360) / FAX:800-681-7402
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry