• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 4:00 a.m. to 6:00 p.m. (EDT) 10/21/2018. We apologize for the inconvenience.

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20 , 20mm x 40mm

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20 , 20mm x 40mm

HFSP5 Series extrusion with milled top and bottom surfaces, 20mm x 40mm. They can be used for Linear Guide mounting.

PDF

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20 , 20mm x 40mm:Related Image
Aluminum Extrusion with Milled Surfaces- 5 series, Base 20 , 20mm x 40mm:Related Image

Specifications

Part Number-L
HFSP5-4020-300
■Configurable Length Extrusions
Type[ M ]Material[ S ]Surface TreatmentPart NumberL
0.5mm Increment
TA
HFSA6N01SS-T5 Aluminum AlloyAnodizeHFSP5-204050~400039.220
HFSA6N01SS-T5 Aluminum AlloyAnodizeHFSP5-402050~400019.240

Alterations

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20 , 20mm x 40mm:Related Image
 Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687

 

 

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Loading...
Part Number
HFSP5-2040-[100-1800/0.5]
HFSP5-2040-[1801-3000/0.5]
HFSP5-4020-[100-1800/0.5]
HFSP5-4020-[1801-3000/0.5]
Part NumberVolume DiscountDays to Ship RoHSExtrusion Size Number of Extrusion Slots Extrusion Size - Width (A)(mm)
(mm)
Extrusion Size - Thickness (T)(mm)
(mm)
Overall Length L
(mm)

5 Days or more

620x401 Slot-2 Slots2039.2100 ~ 1800

5 Days or more

620x401 Slot-2 Slots2039.21801 ~ 3000

5 Days or more

640x202 Slots-1 Slot4019.2100 ~ 1800

5 Days or more

640x202 Slots-1 Slot4019.21801 ~ 3000

Loading...

  1. 1

Example

Aluminum Extrusion with Milled Surfaces- 5 series, Base 20 , 20mm x 40mm:Related Image

Basic Information

Standard Extrusion Size(mm) 20 Extrusion Series 5 Series Extrusion Type Rectangle
Extrusion Type HFS Surface Finish Clear Anodize Number of Grooved Surfaces Four Side Slots
Surface Milled Milled Material A6N01SS-T5 Aluminum Alloy L Dimension Fixed, Specified Configurable

Frequently Asked Questions (FAQs)

Question: What is the load capacity of this extrusion?
Answer: The formulas to determine load capacity of extrusions can be found at: https://us.misumi-ec.com/pdf/fa/2010/p2431.pdf

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET