Empowering Engineers with

Configurable Components

HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -2 Slots-

HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -2 Slots-
  • Volume Discount

HFS6 Series 30mm, 60mm SQ. extrusions with 2 slots and flat surfaces.

Part Number Configured Part Number is shown.
HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -2 Slots-:Related Image

Specifications

Part Number-L
HFS6-3060-800
KHFS6-3060-1000
KHFS6-3060-4000
■Configurable Length Extrusions
Type[ M ]Material[ S ]Surface TreatmentPart NumberL 0.5mm IncrementMass kg/mSectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSA6N01SS-T5 Aluminum AlloyClear AnodizeHFS6-306050~40001.65925.33x10420.56x104
HFSA6N01SS-T5 Aluminum AlloyBlack AnodizeHFSB6-306050~40001.65925.33x10420.56x104
HFSA6N01SS-T5 Aluminum AlloyClear Coating (Anodize + Clear Coating)CAF6-306050~40001.65925.33x10420.56x104
HFSLA6N01SS-T5 Aluminum AlloyClear AnodizeHFSL6-306050~40001.294764.87x10417.87x104
HFSLA6N01SS-T5 Aluminum AlloyBlack AnodizeHFSLB6-306050~40001.294764.87x10417.87x104
GFS6061-T6 Aluminum Alloy EquivalentClear AnodizeGFS6-306050~40001.716345.95x10423.78x104
[ ! ]Extrusions without anodizing are also available.
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusions (Effective Length 4000mm, 1000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Type[ M ]Material[ S ]Surface TreatmentPart NumberL
mm
Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSA6N01SS-T5 Aluminum AlloyClear AnodizeKHFS6-306040005925.33x10420.56x104
HFSA6N01SS-T5 Aluminum AlloyClear AnodizeKHFS6-306010005925.33x10420.56x104
HFSA6N01SS-T5 Aluminum AlloyBlack AnodizeKHFSB6-306040005925.33x10420.56x104
HFSA6N01SS-T5 Aluminum AlloyClear Coating(Anodize + Clear Coating)KCAF6-306040005925.33x10420.56x104
HFSLA6N01SS-T5 Aluminum AlloyClear AnodizeKHFSL6-306040004764.87x10417.87x104
HFSLA6N01SS-T5 Aluminum AlloyBlack AnodizeKHFSLB6-306040004764.87x10417.87x104
GFS6061-T6 Aluminum Alloy EquivalentClear AnodizeKGFS6-306040006345.95x10423.78x104
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)

Alterations

HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -2 Slots-:Related Image

Alterations are not applicable to all frames. 

 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  

Basic Information

Standard Extrusion Size(mm) 30 Extrusion Size 30×60 Extrusion Series 6 Series
Extrusion Type Rectangle Number of Extrusion Slots 1 Slot-2 Slots Number of Grooved Surfaces Four Side Slots
Surface Milled None Extrusion Size - Width (A)(mm)(mm) 30 Extrusion Size - Thickness (T)(mm)(mm) 60

Configure

Clear All

Specification/Dimensions

  • Standard Extrusion Size(mm)

    • 30
  • Extrusion Size

    • 30×60
  • Extrusion Series

    • 6 Series
  • Extrusion Type

    • Rectangle
  • Number of Extrusion Slots

    • 1 Slot-2 Slots
  • Extrusion Type

    • HFS
    • GFS
    • HFSL
  • Surface Finish

    • Clear Anodize
    • Black Anodize
    • Clear Coating
  • Number of Grooved Surfaces

    • Four Side Slots
  • Surface Milled

    • None
  • Material

    • A6N01SS-T5 Aluminum Alloy
    • 6061 Aluminum AlloySS-T6 Equivalent
  • Extrusion Size - Width (A)(mm)(mm)

    • 30
  • Extrusion Size - Thickness (T)(mm)(mm)

    • 60
  • L Dimension Fixed, Specified

    • Configurable
    • Standard, Fixed
  • Overall Length L (Effective Length)(mm)

    • 1000
    • 4000
  • Overall Length L(mm)

    [45-1800/0.5mm increments] [1801-4000/0.5mm increments]
  • Type

    • HFSL6-3060
    • KHFSL6-3060
    • HFS6-3060
    • HFSB6-3060
    • KCAF6-3060
    • KHFS6-3060-1000
    • KHFSB6-3060
    • CAF6-3060
    • KGFS6-3060
    • HFSLB6-3060
    • KHFSLB6-3060
    • GFS6-3060
  • CAD

    • 2D
    • 3D

Days to Ship

  • Days to Ship

    • ALL
    • 1 Day or Less
    • 4 Days or Less

Tech Support

Automation Components Group
TEL:800-681-7475 (ext.360) / FAX:800-681-7402
8:30 a.m. - 8:00 p.m. ET (Monday to Friday)
Technical Inquiry