• MISUMI USA's offices and warehouses will close for the Thanksgiving Holiday weekend. MISUMI USA will be closed Thursday, November 23, through Sunday, November 26 for the Thanksgiving holiday. Orders submitted after 9:00 p.m. Eastern Time on Wednesday, November 22 will be processed when we return Monday, November 27. Online quoting and order entry will be available on our Web Ordering System. We wish you all a happy holiday.

HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -3 Slots or more-

HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -3 Slots or more-:Related Image


Part Number-L
■Configurable Length Extrusions
Type[ M ]Material[ S ]Surface TreatmentPart NumberL 0.5mm IncrementMass
Sectional Area mm2Cross Sectional Moment of Inertia mm4
HFSA6N01SS-T5 Aluminum AlloyClear AnodizeHFS6-309050~40002.449028.44x10466.28x104
[ ! ]Extrusions without anodizing are also available.
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Type[ M ]Material[ S ]Surface TreatmentPart NumberL
Sectional Area
Cross Sectional Moment of Inertia mm4
HFSA6N01SS-T5 Aluminum AlloyClear AnodizeKHFS6-309040009028.44x10466.28x104
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)


HFS6 Series Aluminum Extrusions 30mm / 60mm Square- -3 Slots or more-:Related Image

Alterations are not applicable to all frames. 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Part Number
Part NumberVolume DiscountDays to Ship RoHSL Dimension Fixed, Specified Overall Length L (Effective Length)
Overall Length L

1 Day

CompliantConfigurable-50 ~ 1800

1 Day

CompliantConfigurable-1801 ~ 4000

1 Day

CompliantStandard, Fixed4000-


  1. 1

Basic Information

Standard Extrusion Size(mm) 30 Extrusion Size 30x90 Extrusion Series 6 Series
Extrusion Type Rectangle Number of Extrusion Slots 1 Slot-3 Slots Extrusion Type HFS
Surface Finish Clear Anodize Number of Grooved Surfaces Four Side Slots Surface Milled None
Material A6N01SS-T5 Aluminum Alloy Extrusion Size - Width (A)(mm)(mm) 30 Extrusion Size - Thickness (T)(mm)(mm) 90

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Automation Components Group
Tel:800-681-7475 (ext. 360) / FAX:800-681-7402
Mon. - Fri. 8:30 a.m. - 8 p.m. ET