• MISUMI USA's offices and warehouses will close for the Thanksgiving Holiday weekend. MISUMI USA will be closed Thursday, November 23, through Sunday, November 26 for the Thanksgiving holiday. Orders submitted after 9:00 p.m. Eastern Time on Wednesday, November 22 will be processed when we return Monday, November 27. Online quoting and order entry will be available on our Web Ordering System. We wish you all a happy holiday.

Aluminum Extrusions - 8-45 Series (90x90)

Aluminum Extrusions - 8 Series, Base 45, Four-Side Slots, Two Slots per Side:Related Image

Specifications

Part Number-L
HFS8-9090-800
KHFS8-9090-4000
■Configurable Length Extrusions
TypeMaterialSurface TreatmentPart NumberL 0.5mm IncrementMass
kg/m
Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSA6N01SS-T5Clear AnodizeHFS8-909050~40005.82162209.2x104209.2x104
HFSA6N01SS-T5Black AnodizeHFSB8-909050~40005.82162209.2x104209.2x104
HFSA6N01SS-T5Clear CoatingCAF8-909050~40005.82162209.2x104209.2x104
GFSA6061SS-T6 EquivalentClear AnodizeGFS8-909050~40009.63592320.2x104320.2x104
[ ! ]Extrusions without anodizing are also available.
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
TypeMaterialSurface TreatmentPart NumberL
mm
Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSA6N01SS-T5Clear AnodizeKHFS8-909040002162209.2x104209.2x104
HFSA6N01SS-T5Black AnodizeKHFSB8-909040002162209.2x104209.2x104
HFSA6N01SS-T5Clear CoatingKCAF8-909040002162209.2x104209.2x104
GFSA6061SS-T6 EquivalentClear AnodizeKGFS8-909040003592320.2x104320.2x104
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length. (several cm)

Alterations

Aluminum Extrusions - 8 Series, Base 45, Four-Side Slots, Two Slots per Side:Related Image

Alterations are not applicable to all frames. 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
CAF8-9090-[50-1800/0.5]
CAF8-9090-[1801-4000/0.5]
GFS8-9090-[50-1800/0.5]
GFS8-9090-[1801-4000/0.5]
HFS8-9090-[50-1800/0.5]
HFS8-9090-[1801-4000/0.5]
HFSB8-9090-[50-1800/0.5]
HFSB8-9090-[1801-4000/0.5]
KCAF8-9090-4000
KGFS8-9090-4000
KHFS8-9090-4000
KHFSB8-9090-4000
Part NumberVolume DiscountDays to Ship RoHSExtrusion Type Surface Finish Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)

4 Days or more

CompliantHFSClear CoatingA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800

4 Days or more

CompliantHFSClear CoatingA6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 4000

4 Days or more

CompliantGFSClear Anodize6061 Aluminum AlloySS-T6 EquivalentConfigurable-50 ~ 1800

4 Days or more

CompliantGFSClear Anodize6061 Aluminum AlloySS-T6 EquivalentConfigurable-1801 ~ 4000

4 Days or more

CompliantHFSClear AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800

4 Days or more

CompliantHFSClear AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 4000

4 Days or more

CompliantHFSBlack AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800

4 Days or more

CompliantHFSBlack AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 4000
Available

4 Days

CompliantHFSClear CoatingA6N01SS-T5 Aluminum AlloyStandard, Fixed4000-

4 Days

CompliantGFSClear Anodize6061 Aluminum AlloySS-T6 EquivalentStandard, Fixed4000-
Available

4 Days

CompliantHFSClear AnodizeA6N01SS-T5 Aluminum AlloyStandard, Fixed4000-
Available

4 Days

CompliantHFSBlack AnodizeA6N01SS-T5 Aluminum AlloyStandard, Fixed4000-

Loading...

  1. 1

Basic Information

Standard Extrusion Size(mm) 90 Extrusion Size 90x90 Extrusion Series 8-45 Series
Extrusion Type Square Number of Extrusion Slots 2 Slots-2 Slots Number of Grooved Surfaces Four Side Slots
Surface Milled None Extrusion Size - Width (A)(mm)(mm) 90 Extrusion Size - Thickness (T)(mm)(mm) 90

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support