• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 4:00 a.m. to 7:30 a.m. (EST) 11/18/2018. We apologize for the inconvenience.

Aluminum Extrusions - 8 Series, Base 50, 100 x 100, 4-Side Slots

Aluminum Extrusions - 8 Series, Base 50, 100 x 100, 4-Side Slots:Related Image

Specifications

Part Number-L
GFS8-100100-800
KGFS8-100100-4000
■Configurable Length Extrusions
Type[ M ]Material[ S ]Surface TreatmentPart NumberL 0.5mm IncrementMass
kg/m
Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
GFS6061-T6 Aluminum Alloy EquivalentClear AnodizeGFS8-10010050~400010.683957465.8x104465.8x104
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Type[ M ]Material[ S ]Surface TreatmentPart NumberL
mm
Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
GFS6061-T6 Aluminum Alloy EquivalentClear AnodizeKGFS8-10010040003957465.8x104465.8x104
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)

Alterations

Aluminum Extrusions - 8 Series, Base 50, 100 x 100, 4-Side Slots:Related Image

Alterations are not applicable to all frames. 

Category Alteration Names Codes Explanations Catalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling Service P2-679&680
End Tapping End Tapping on Center Hole LTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends. P2-681
End Tapping 4 Corner Holes LSP/RSP/SPW P2-692
Specify How to Cut Precision Cut SC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg Cut L_T45/R_T45 Cut at 45 deg angle. 
Wrench Access Holes Wrench Access Hole at Fixed Position LWP/RWP Add wrench access holes at fixed position for blind joints.  P2-683&684
Wrench Access Hole at Specified Position AH/BH/AV/BV Add wrench access holes at specified position for blind joints. P2-685&686
Counterbores Counterbores at Specified Position Z6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint Type D Hole LDH/RDH Add holes needed for Single Joint connection. P2-688
S Hole LSH/RSH Add holes needed for pre-assembly double joint connection. P2-689
M Hole LMH/RMH Add holes needed for post-assembly double joint connection. P2-690
L Hole JLP/KLP Add holes needed for parallel joint connection.  P2-691
Other Alterations GNFS/GFS Series End Tapping LTS/RTS/TSW Add end tappings on high rigidity frames.  P2-692
HFSR Series End Tapping LTS/RTS/TSW Add end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Loading...
Part Number
GFS8-100100-[50-1800/0.5]
GFS8-100100-[1801-4000/0.5]
KGFS8-100100-4000
Part NumberVolume DiscountDays to Ship RoHSL Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)

4 Days or more

6Configurable-50 ~ 1800

4 Days or more

6Configurable-1801 ~ 4000

4 Days or more

6Standard, Fixed4000-

Loading...

  1. 1

Basic Information

Standard Extrusion Size(mm) 100 Extrusion Size 100x100 Extrusion Series 8-45 Series
Extrusion Type Square Number of Extrusion Slots 2 Slots-2 Slots Extrusion Type GFS
Surface Finish Clear Anodize Number of Grooved Surfaces Four Side Slots Surface Milled None
Material 6061 Aluminum AlloySS-T6 Equivalent Extrusion Size - Width (A)(mm)(mm) 100 Extrusion Size - Thickness (T)(mm)(mm) 100

Frequently Asked Questions (FAQs)

Question: What is the load capacity of this extrusion?
Answer: The formulas to determine load capacity of extrusions can be found at: https://us.misumi-ec.com/pdf/fa/2010/p2431.pdf

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support