• MISUMI is open to support you, but some lead times may be impacted. Read more about our COVID 19 Response

[Motorized] Z-Axis - Cross Roller - Standard (ZMPG) (MISUMI)

[Motorized] Z-Axis - Cross Roller - Standard (ZMPG) (MISUMI)
  • New Products

Z-Axis Stage; lightweight and compact with excellent accuracy.

  • inCAD Components



[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
[ M ] Material: Aluminum Alloy
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-16 (4 pcs.)


Part Number - Sensor - Motor - Cable
Part Number Sensor Motor Cable Mechanical Standards Accuracy Standards *1
Type No. Cover Position Stage Surface (mm) Travel Distance (mm) Weight (kg) Unidirectional Positioning Accuracy Pitching Yawing
ZMPG 730 L
(Cable not included (separately sold))
60×70 30 0.9 5µm or less / Full Stroke 25'' 20''
(38 Micro Step)
*1. The above accuracy standards of Unidirectional Positioning Accuracy are for a single axis.

Part Number Being Previewed: 

  • Please use our configuration tools to update this preview to your specific part.
Part Number
Part NumberVolume DiscountDays to Ship RoHSResolution
Maximum Velocity
Table Straightness
Motor type Sensor selection

10 Days

102μm203b:Stepper Motor (5-Phase Standard)Left

10 Days

101μm203h:38 Microstepping MotorLeft

10 Days

102μm203b:Stepper Motor (5-Phase Standard)Right

10 Days

101μm203h:38 Microstepping MotorRight


  1. 1

More Information

[Motorized] Z-Axis - Cross Roller:Related Image
[Motorized] Z-Axis - Cross Roller:Related Image
■Common Specifications
Feed Screw Ball Screw Ø8, Lead 1
Guide Cross Roller Guide
Resolution *2 Full 2µm (1µm)*3
Half 1µm(0.5µm)*3
Fine Feed (upon 1/20 partitioned) 0.05µm
Max. Speed *4 20mm/sec
Positioning repeatability Within ±0.3µm
Load Capacity 29.4N
Lost Motion 1µm or less
Backlash 0.5µm or less
Straightness 3µm or less
Parallelism 30µm or less
Motion Parallelism 10µm or less
*2. This represents the travel distance of stage per one pulse signal.
*3. The values in ( ) are for Motor Option MS (Micro Step).
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
[ ! ]The above specifications table is for a single axis stage placed flatly.
■Electrical Specifications
Part Number C MS
Standard 38 Micro Step
Motor Type 5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)
Part Number PMM33BH2-C16-1(#28mm) C7214-9015-1(#38mm)
Step Angle 0.72° 0.36°
Driver Part Number -
Connector Part Number HR10A-10J-12P (73) (Hirose Electric Co., LTD.)
Applicable Receptacle Connector HR10A-10P-12S (73) (Hirose Electric Co., LTD.)
Contact Part Number -
Applicable Receptacle Contact Part Number -
Sensor Limit Sensor Provided
Slit Home Origin Sensor Provided
Home Sensor -
Part Number Photomicrosensor: PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.)
Power Supply Voltage DC5~24V or less ±10%
Current Consumption 45mA or less (15mA or less per Sensor)
Control Output NPN Open Collector Output DC30V or less, 50mA or less
Residual Voltage 2V or less (when load current is 50mA)
Residual Voltage 1V or less (when load current is 16mA)
Output Logic Detecting (Dark): Output Transistor OFF (Non-Conducting)
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.

Basic Information

Type Z-Axis Motorized Stages Material Aluminum Guide Cross Roller
Table feeding methods Ball screw Table Length(mm) 70 Table width(mm) 60
Stroke (Z Distance)(mm) 30 Surface Treatment Black Anodize Through Hole (Table Center Hole) No
Load Capacity (Range)(N) 5~30 Allowable Load(N) 29.4 Positioning Accuracy(µm) 5
Cable Cable not included

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support