TSC Series Carbide Roughing End Mill, Fine Pitch/Long Model

TSC Series Carbide Roughing End Mill, Fine Pitch/Long Model

A single unit compatible with both the roughing and medium roughing

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)
Edit Part Configuration

Part Number

Configured Part Number is shown.

TSC series carbide roughing end mill, fine pitch / long model:Related Image

Part Number
SN-TSC-RFPL6-[30-75/1]-25
SN-TSC-RFPL8-[35-76/1]-30
SN-TSC-RFPL10-[40-70/1]-35
SN-TSC-RFPL12-[45-90/1]-40
SN-TSC-RFPL16-[60-93/1]-55
SN-TSC-RFPL20-[70-112/1]-65
TSC-RFPL6
TSC-RFPL8
TSC-RFPL10
TSC-RFPL12
TSC-RFPL16
TSC-RFPL20
Part NumberVolume DiscountDays to Ship Outer Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Additional Classification Tolerance of OD
(mm)
● Inventory Product □ Manufacturer Product

5 Days or more

625610030 ~ 75Standard Neck Relief0 ~ -0.058

5 Days or more

830810035 ~ 76Standard Neck Relief0 ~ -0.058

5 Days or more

10351010040 ~ 70Standard Neck Relief0 ~ -0.07

5 Days or more

12401212545 ~ 90Standard Neck Relief0 ~ -0.07

5 Days or more

16551612560 ~ 93Standard Neck Relief0 ~ -0.07

5 Days or more

20652015070 ~ 112Standard Neck Relief0 ~ -0.084

4 Days or more

6256100-Stocked Product0 ~ -0.058

4 Days or more

8308100-Stocked Product0 ~ -0.058

4 Days or more

103510100-Stocked Product0 ~ -0.07

4 Days or more

124012125-Stocked Product0 ~ -0.07

4 Days or more

165516125-Stocked Product0 ~ -0.07

4 Days or more

206520150-Stocked Product0 ~ -0.084

Loading...

  1. 1

Specifications

TSC series carbide roughing end mill, fine pitch / long model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Number of Flutes
Outer Diameter
D
TSC-RFPL 6 25 100 6 4
8 30 100 8 4
10 35 100 10 4
12 40 125 12 4
16 55 125 16 4
20 65 150 20 4



For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 4 Model Roughing
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Inclined Cutting Geometry Ultra-Small R
Helix Angle (θ) Weak Helix (15 to 25°)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support