Pull Down Vise

Pull Down Vise

Click this image to zoom it.

Move the mouse over the image to zoom

Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
PV-0
PV-1
PV-2
PV-3
Part NumberVolume DiscountDays to Ship Mouth Width
(mm)
Standard guide block width
(mm)
Minimum Height
(mm)
Max. Height
(mm)
Set bolt Mass
(kg)
Compatible Vise Accessory

5 Days or more

46-4250M121.5EVS-(75-3、100-4)Filed Mouthpiece: 2 pcs, Washers (M12): 2 pcs, Hexagonal Bolts (M12 × 45): 2 pcs, Hexagon Wrench (for Clamps, Mouthpieces): × 1 of Each

4 Days or more

62-5664M144.8EVS150-6Filed Mouthpiece: 2 pcs, T Slot Bolt (M14): Compatible T Groove 14.18 - 4 pcs, Hexagonal Nuts (M14): 4 pcs, Washers (M14): 4 pcs, Hexagon Wrench (for Clamps, Mouthpieces): × 1 of Each

4 Days or more

851882102M1412.5(EVS、ETS、EPA、ETPA)-75-3Standard guide blocks (2 pcs per set): 1 set with compatible groove width 18 mm, File cap: 2 pcs, T-slot bolt (M14): 6 bolts with compatible T-grooves 14 and 18 mm, Hex nuts (M14): 6 pcs, Washer (M14): 6 pcs, Fixing block: 2 blocks, Hex wrench (for clamp, for base): 1 pc each

4 Days or more

12018135164M1839.1(EVS、EPA)-150-6Standard guide blocks (2 pcs per set): 1 set with compatible groove width 18 mm, File cap: 2 pcs, T-slot bolt (M18): 6 bolts with compatible T-grooves 18 and 22 mm, Hex nuts (M18): 6 pcs, Washer (M18): 6 pcs, Fixing block: 2 blocks, Hex wrench (for clamp, for base): 1 pc each

Loading...

  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support