Point Tap Series for Difficult-To-Cut Materials Long Shank CPM-LT-POT

Point Tap Series for Difficult-To-Cut Materials Long Shank CPM-LT-POT

The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

PDF

Edit Part Configuration

Part Number

Configured Part Number is shown.

 
Part Number
CPM-LT-POT-M3X0.5X100
CPM-LT-POT-M4X0.7X100
CPM-LT-POT-M5X0.8X100
CPM-LT-POT-M6X1X100
CPM-LT-POT-M6X1X150
CPM-LT-POT-M8X1.25X100
CPM-LT-POT-M8X1.25X150
CPM-LT-POT-M10X1.5X150
CPM-LT-POT-M10X1.25X150
CPM-LT-POT-M12X1.5X150
CPM-LT-POT-M12X1.25X150
CPM-LT-POT-M12X1.75X150
CPM-LT-POT-M14X1.5X150
CPM-LT-POT-M14X2X150
CPM-LT-POT-M16X1.5X150
CPM-LT-POT-M16X2X150
CPM-LT-POT-M18X1.5X150
CPM-LT-POT-M18X2.5X150
CPM-LT-POT-M20X1.5X150
CPM-LT-POT-M20X2.5X150
CPM-LT-POT-M22X1.5X200
CPM-LT-POT-M22X2.5X200
CPM-LT-POT-M24X1.5X200
CPM-LT-POT-M24X3X200
Part NumberVolume DiscountDays to Ship Nominal Pitch, Number of Threading
(mm)
L
(mm)
Accuracy Length under neck
(mm)
Shank diameter
(mm)
Number of Grooves Thread Length
(mm)
Protrusion Tool No.

4 Days or more

M30.5100OH3194311-78610

4 Days or more

M40.7100OH3215313-78613

4 Days or more

M50.8100OH3245.5316-78616

4 Days or more

M61100OH3296319-78619

4 Days or more

M61150OH3296319-78621

4 Days or more

M81.25100OH3376.2322Available78623

4 Days or more

M81.25150OH3376.2322Available78625

4 Days or more

M101.5150OH3417324Available78632

4 Days or more

M101.25150OH3417324Available78636

4 Days or more

M121.5150OH3488.5329Available78647

4 Days or more

M121.25150OH4488.5329-78651

4 Days or more

M121.75150OH3488.5329Available78643

4 Days or more

M141.5150OH34810.5330-78662

4 Days or more

M142150OH44810.5330-78658

4 Days or more

M161.5150OH35212.5432-78669

4 Days or more

M162150OH45212.5432-78665

4 Days or more

M181.5150OH45514437Available78675

4 Days or more

M182.5150OH45514437-78672

4 Days or more

M201.5150OH45815437Available78681

4 Days or more

M202.5150OH45815437Available78678

4 Days or more

M221.5200OH46317438Available78688

4 Days or more

M222.5200OH46317438Available78685

4 Days or more

M241.5200OH46619445Available78694

4 Days or more

M243200OH46619445Available78691

Loading...

  1. 1

Basic Information

Screw Types Meter Chamfer threads 5P Tool Material Type Powder high-speed steel
Work material High Carbon Steel (C with a content over 0.45%) / Quenched and tempered steel (25 to 35 HRC) / Quenched and tempered steel (35 to 45 HRC) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Titanium Alloy (Ti-6Al-4V, etc) / Nickel-based alloy (Inconel, etc.) Tap Type Point tap Hole type For through hole
Coating Y/N NA Coating Type Non-Coated

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support