Gasket Groove Width Measurement Limit Gauge

Edit Part Configuration

Part Number

Configured Part Number is shown.

Part Number
GSW-1
GSW-2
GSW-3
GSW-4
GSW-5
GSW-6
GSW-7
Part NumberVolume DiscountDays to Ship Flange Groove Width
(mm)
Flange Groove Depth
(mm)
Radius of Corner of Flange Groove Bottom Mass
(g)
Application Specifications Compatible Ring Number Flange Groove Width Tolerance
(mm)
Flange Groove Depth Tolerance
(mm)
Tolerance of the Radius of Corner of Flange Groove Bottom
(mm)
Allowable difference of angle
(°)

4 Days or more

11.917.920.811A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.21、23、24、26、27、30、31、34、35、37、39、41、44、45、49、53、57、61、65、69、82、84、92、99±0.200 to +0.41+0.8±0.5

4 Days or more

13.499.521.511A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.28、32、46、73±0.200 to +0.41+0.8±0.5

4 Days or more

16.6611.131.522A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.38、50、54、62、66、77、86、87±0.200 to +0.41+0.8±0.5

4 Days or more

19.8412.701.522A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.42、47、70、74、88、89、93、94、95±0.200 to +0.41+0.8±0.5

4 Days or more

23.0114.271.535A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.51、58、96、97、98±0.200 to +0.41+0.8±0.5

4 Days or more

26.9715.882.335A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.63、78±0.200 to +0.41±0.8±0.5

4 Days or more

30.1817.482.340A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.· The standard for GO/NOT is in accordance with JPI-7S-23.55、67、71、100±0.200 to +0.41±0.8±0.5

Loading...

  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support