Days to Ship |
|
---|
Enclosures - Sloped Case, TS Series
Takachi Electronics Enclosure
Sloped Case (TS)
[Features]
· Chassis employs SPCCt1.0 black paint for TS-4 only.
· Included screws correspond to M3 × 6 binding screws.
· Cover / chassis one-sided protective sheet included (however, no protective sheet is included for the TS-4).
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Multipurpose, Plastic, TW Series
Takachi Electronics Enclosure
Plastic case (TW)
[Features]
- A small general-purpose plastic case with a screw-securing configuration.
- The ABS-resin TW series comes in 26 sizes with 2 color specifications: G (light gray) and B (black). The flame-retardant ABS-resion TWN series comes in 23 sizes with one color specification: W (off-white).
- Equipped with a boss for mounting on a circuit board.
- Use on a variety of devices, such as measuring instruments, communication devices, and handheld controllers.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Plastic, Water/Dust Proof, Hinged Latch, BCAP Series
Takachi Electronics Enclosure
Waterproof/Dust-proof Switching Type Plastic Box (BCAP)
[Features]
- An IP65-grade open/close box that's easy to maintain.
- A general-purpose plastic box available for various fields, including FA control/electric facility works.
- The BCAP series comes in 50 sizes; the top cover is available in whitish gray (ABS) or see-through (polycarbonate).
- The BCPC series comes in 46 light-gray sizes, made of polycarbonate for heat and flame resistance.
- Use for communication equipment, solar power connection boxes, etc.
- Only the G type is available for BCAP507018, 507025, 608018 and 608028.
- Transparent covers are not available for the BCPC series.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Plastic, Wall Mounting Flange, TWF Series
Takachi Electronics Enclosure
[Features]
• With flange foot eases installation.
• 23 sizes of flame-retardant plastic cases, and available in two colors - off-white and dark gray.
· Equipped with a boss for mounting on a circuit board.
· May be used with a variety of devices, such as measuring instruments, communication devices, and controllers, etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Aluminum, Heat Sink, HY Series
Takachi Electronics Enclosure
An aluminum box for natural cooling with a vertical heat sink shape made with thermal countermeasures in mind.
[Features]
· Uses aluminum extrusion material for incredible durability.
· The case is made of few parts, making assembly easy.
· Aluminum case for thermal countermeasures with a shape that effectively dissipates heat.
· Superior design, with a hairline finish on the surface for a high-quality feel.
· Easy-to-mount design due to the flat heat sink surface.
· 5 heights, 4 widths, and 1 depth, for a total of 20 sizes and 40 types available.
[Applications]
· Ideal for fanless PCs, power amplifiers, power source equipment, etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Polycarbonate Plastic Box with Lock, BCPK Series
Takachi Electronics Enclosure
Locking plastic box with superior heat resistance, flame retardance, dustproofing and waterproofing.
[Features]
· General-use locking plastic box that can be used in a variety of fields.
· Made from with polycarbonate which features superior heat resistance and flame retardance.
· Protective grade IP65 (waterproof/dustproof).
· Temperature range is -20 to +75°C.
[Applications]
· Can be used for various applications such as FA control, electrical construction and communications devices.
· Ideal for communications devices, solar power connection boxes, etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Toyogiken
The BOXTM series terminal box integrates both the enclosure and terminal block into a single part allowing for a more compact and lightweight product, making it ideal for storing devices such as sensor amplifiers.
[Features]
・Made of reinforced PBT plastic resin.
・Oil and chemical resistant.
・Choose from upper, lower, or independent pole configurations.
・10 pin electrode variation available.
・IP65 environmental rating.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Control Box, Aluminum, FC Series
Takachi Electronics Enclosure
Control Panel Box (FC)
[Features]
· A total of 700 different general purpose aluminum boxes are available, including a total of 175 different sizes, with 7 different heights, 9 different widths and 6 different depths, as well as 4 different color specifications available.
· The panel structure includes both a screw-in side and an inlay side, and either side can be placed in front.
· The frame contains a structure that includes a slide nut, so mounting of a chassis or DIN rail is possible without performing additional work.
Available color specifications include GS (gray / silver), BS (black corner block), BX (black corner block / frame), and BB (all black).
· Product can be used in a variety of different applications, including operational boxes, touch panel display cases, etc.
· Customers who require a custom-sized case should use the 8 - 11P - 16P FCS Series.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Control Panel Box - Configurable Dimensions, Standard, FSB Series
MISUMI
Standard snap-lock type
Configure Now
Ships as soon as | 5 Days |
---|
Enclosures - Aluminum, Flanged, Water/Dust Proof, AW Series
Takachi Electronics Enclosure
[Features]
▪ It is an aluminum case that has a waterproof and heat dissipation effect of IP67.
· Has flange feet for easy wall mounting.
· An insert groove is included inside the body frame, enabling the board and chassis to be slid in.
· Suitable for outdoor LED power supplie, plasnt control boxes etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Handheld Plastic Case, LC Series
Takachi Electronics Enclosure
Handheld-type tapered case that can be used in a variety of applications.
[Features]
· Handheld case with a smart tapered design.
· 8 types of battery configurations.
· Case is made from flame-retardant ABS resin (UL94V-0).
· Marked with + and - to show battery orientation.
· Usable temperature range: -10°C to +60°C
[Applications]
· Can be used for various types of hand-held devices, such as industrial measuring instruments, measuring devices, inspection devices, communications devices and medical instruments.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Toyogiken
The TC series relay box integrates both the enclosure and terminal block into a single part allowing for a more compact and lightweight product. This makes it ideal for wiring relay sensors and solenoids.
[Features]
・4 or 6 pin electrode variations available.
・IP65 environmental rating.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Handheld Case, Silicone Cover, LCS Series
Takachi Electronics Enclosure
Hand-held type plastic box with silicone cover.
[Features]
· The cover is flexible and resistant to slipping. Protects equipment from impacts such as falls, etc.
Interior case is made from flame-retardant ABS resin (UL94V-0).
There are 8 types of battery configurations: 2 × AA batteries, 3 × AA batteries, 4 × AA batteries, 2 × AAA batteries, 3 × AAA batteries, 4 × AAA batteries, 1 × 006P (9V) battery or no batteries.
Marked with + and - to show battery orientation.
[Applications]
· Can be used for various types of hand-held devices, such as industrial measuring instruments, measuring devices, inspection devices, communications devices and medical instruments.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Network Box, Plastic, Water/Dust Proof, WP Series
Takachi Electronics Enclosure
Plastic box for outdoor use with a protection grade of IP67 that is waterproof and resistant to UV radiation.
[Features]
· A waterproof box with a protection grade of IP67. (IP6X: No ingress of dust; complete protection against contact. IPX7: No ingress of water when submerged up to a depth of 1 meter for 30 minutes.)
· The G type (white-gray) is made from ASA resin which features superior weather resistance.
· The C type (charcoal gray) is made from flame retardant ABS resin (UL94V-0).
· Mountable on walls or metal simply by removing the blind cover.
· Temperature Range: ASA resin: -10 to +60°C, ABS resin: -10 to +50°C. Tightening Torque: 0.25 to 0.35 N m.
[Applications]
· Suitable for outdoor mounting of small wireless devices or access points, etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
It is a steel control box
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Plastic, Water/Dust Proof, BCAL Series
Takachi Electronics Enclosure
Waterproof/Dust-Proof Plastic Box (BCAL)
[Features]
- A large box closed by screw with waterproof gaskets (packing) made of polyurethane.
- Total of 11 sizes.
- Use for applications like FA control/electric facility works.
- Two top cover types available: White-gray (ABS) and clear (polycarbonate). Body is white-gray (ABS).
- Guide marks are provided on the side to make it easier to mount an optional latch hinge.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Polycarbonate, Waterproof/Dust Proof, SPCM Series
Takachi Electronics Enclosure
[Features]
· A box made of a polycarbonate with superior impact resistance.
· Can choose from a rich product assortment including a total of 21 sizes.
· There are two types of top covers, white-gray and clear, available.
▪ Drilling for wiring is possible as the product comes with an M-screw sized knockout.
· Can be used in various applications such as terminal relay boxes, control boxes, communication boxes, etc.
· Direct insertion of a screw into the cover screw mount enables mounting on a wall surface etc. without requiring an externally mounted leg.
- As far as the protection rating is concerned, notes for use are given on Pages 2 - 3.
- Please refer to the above pages when selecting a box.
- To open the knock-out, fix the case in place with the cover screws, align a flat-head screwdriver with the groove and hit lightly with a hammer, etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - IP67 Handheld Enclosure, WH Series
Takachi Electronics Enclosure
A plastic case that is resistant to slipping, and is both waterproof and shock resistant.
[Features]
· 4 types of battery configurations: AAA battery × 4, AA battery × 3, AA battery × 2, and no batteries.
· With + and - battery marks to prevent incorrect battery placement.
· The elastomer side grip makes it less likely to slip in your hands, and features shock-resistant properties.
· 5 colors available to choose from. The case features a stylish tapered design and IP67 waterproofing.
· Case is made from flame-retardant ABS resin (UL94V-0).
· The temperature range is -10 to +60°C, and the tightening torque is 0.2 to 0.3 N m (2 to 3 kgf cm).
[Applications]
· Can be used for various types of hand-held devices, such as measuring devices, inspection devices, communications devices and medical instruments.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Toyogiken
Uses highly durable and chemically resistant PBT (UL94-0) in its insulation materials outside the box main body.
[Features]
· 20 terminal blocks are mounted inside the BOX.
· No machining has been performed on the BOX, so use after drilling as the specifications require.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Control Box, FCW Series
Takachi Electronics Enclosure
Opening and Closing Control Box (with key / without key)
[Features]
- A total of 864 different opening and closing aluminum boxes are available, including 108 different sizes, with 6 different heights, 6 different widths and 7 different depths, 2 flat surface handle types and 4 color specifications.
- Opening and closing cabinet type allows for easy maintenance.
- Flat surface handles both with and without keys included are available.
- The frame structure includes a slide nut, allowing a chassis or DIN rail to be mounted.
Available color specifications include GS (gray/silver), BS (black corner block), BX (black corner block/frame), and BB (all black).
- Product can be used in a variety of different applications, including control panel boxes, operational boxes, and touch panel display cases.
- Customers who require a custom sized case should use the 8 - 17 - 20P FCWS series.
Configure Now
Ships as soon as | 4 Days |
---|
Enclosures - Sloped Box, CF Series
Takachi Electronics Enclosure
Sloped Control Box (CF)
[Features]
- The clean design features a 10° slope which makes operation easy.
- The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
· Machining is easy because of the flat plate.
- The product is extremely lightweight, with the side plates employing flame retardant ABS resin (UL94V-0) and the frame employing extruded aluminum.
- The product can be mounted in any position due to the sticky rubber legs.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Diecast Aluminum Box, TD Series
Takachi Electronics Enclosure
Aluminum Die Cast Box (TD)
[Features]
· 39 models with 13 sizes and 3 types of color specifications are available.
· Box with superior impact resistance.
· Thin and clean design with corner R.
· Unprocessed N type can also be used as a conduction box.
· Small, round design.
· Available unprocessed and in standard colors, with 2 types of paint finish (light gray and black).
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Universal Case, Aluminum, UC Series
Takachi Electronics Enclosure
Universal Aluminum Sash Case (UC)
[Features]
- The UC series uses extruded aluminum on the top/bottom covers; it is useful for a broad range of applications, including corner-R mounted electric, electronic, and control equipment.
- The front and black panel on the GX type have different colors; light gray and dark gray.
- The top and bottom covers have 2 and 3 grooves respectively in their fronts and backs; use these for transfer panels, sub panels, printed circuit board mounting, etc.
- Chassis, chassis mounting brackets, panel antishock fixtures, and hexalobular hole mounting slippage prevention screws are available as optional components.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Network Box, Plastic, PF Series
Takachi Electronics Enclosure
A plastic case with a flat design that can also be used for housing wireless LAN or Wi-Fi devices.
[Features]
· Made from flame-retardant ABS resin (UL94V-0), available in a total of 8 sizes, and in 2 colors: off white and dark blue.
· With boss for mounting a circuit board.
· A panel plastic case with a clean panel surface designed to be flat with no level difference.
· Temperature range is -10 to +60°C.
[Applications]
· Can be used for a variety of devices, such as communications devices, measurement devices, controllers, wireless LAN, Wi-Fi access points and industrial communications devices.
· Suitable for use on a table top or for wall mounting.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Rittal
The AE Compact Box can be used as a control/operations panel for equipment and machinery of all kinds in the field of factory automation.
It meets international standards such as UL and CSA and complies with CE marking, allowing it to be used throughout the world.
It also meets the protection grades IP66 (single door) and IP55 (double door).
[Features]
· Optimum corrosion prevention by triple treatment of the housing surface
· Long-lasting high protection grade thanks to the gap-free application of a PU (polyurethane) foam seal
· The housing protection groove (opening) is folded several times for optimal protection and prevention of intrusion of dust and water when the door opens and closes
· For easy wall mounting, the rear panel has holes for direct attachment to a wall anchor or surface
· Maximum flexibility for cable lead-in thanks to a plate with punched holes that can be used as a substitute for a steel ground plate for self-assembly
· Interior rails for mounting at any depth
· The 1-door box lets you quickly change the door hinge position (door opening/closing direction) without machining
· The flange with holes inside the door allows quick assembly of accessories such as support rails and cable duct holders
[Product specifications]
· Material/surface treatment: ordinary steel plate / powder coating
· Paint color: RAL 7035 (light gray [approximate Munsell value 2.5PB8.5/1])
· Certifications: CE, UL, cUL, CSA, TÜV, Germanischer Lloyd, Russian Maritime Register of Shipping,
Lloyds Register of Shipping, Bureau Veritas
· Protection grade: Two types: IP55 (NEMA 12), IP66 (NEMA 4)
[Accessories]
· Mounting plate / handle (double bit) / ground plate
Configure Now
Ships as soon as | 4 Days |
---|
KL Terminal Box Without Ground Plate
Rittal
The KL Terminal Box is used as a relay box in a wide range of industrial settings.
The rails pre-installed on the main body can be used to easily mount equipment. The products lineup features a wide range of sizes.
[Features]
· Optimum corrosion prevention by triple treatment of the housing surface
· Long-lasting high protection grade thanks to the gap-free application of a PU (polyurethane) foam seal
· The housing protection groove (opening) is folded several times for optimal protection and prevention of intrusion of dust and water when the door opens and closes
· For easy wall mounting, the rear panel has holes for direct attachment to a wall anchor or surface
· Flange with built-in 12.5‑mm pitch system holes allows for flexible interior design choices
· The earth anchor inside the cover and the folded grounding plate at each housing corner ensure reliable joining of guard wires to any side
[Product specifications]
· Material/surface treatment: ordinary steel plate / powder coating
· Paint color: RAL 7035 (light gray [approximate Munsell value 2.5PB8.5/1])
· Certifications: CE, UL, cUL, CSA, TÜV, Germanischer Lloyd, Russian Maritime Register of Shipping,
Lloyds Register of Shipping, Bureau Veritas
· Protection grade: IP66 (NEMA 4)
Configure Now
Ships as soon as | 4 Days |
---|
OHM Electric
Classic Relay Box
[Features]
· Integrated cap-cone and terminal block.
· Comes ready-to-use.
- Number of terminal block poles: 5P, 7P, 11P
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Takachi Electronics Enclosure
Terminal Box (TMB)
[Features]
- This terminal box features an integrated box and terminal block.
· Waterproofing and dustproofing grade of IP65.
· The case is made of flame retardant ABS resin (UL94V-0).
· The TMB-4P / 6P / 10P include a ⌀21 knockout.
· When opening a hole, place a flat screwdriver in the position indicated in the following diagram and hit it hard with a hammer etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Waterproof/Dust Proof Terminal Box with Cable Gland, TMC Series
Takachi Electronics Enclosure
[Features]
• This terminal box consists of a cable ground built together with a terminal mount.
• Direct terminal box ideal for industrial equipment and construction machines power cables, motor relays, and sensor relays.
• The protection level corresponds to IP65, and the box material is made from oil-resistant PBT.
• The terminal mount can be chosen from 3P, 4P, and 6P varieties.
• The cable rubber bush includes both ⌀5 and ⌀7.4 varieties.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Sloped Console Case, SKD Series
Takachi Electronics Enclosure
[Features]
- Sloped console case (SKD)
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Control Panel Box - Selectable Color, CAN/CSA Series
MISUMI
Selectable 18 colors all lined up. (Handle type)
Configure Now
Ships as soon as | 11 Days |
---|
Toyogiken
[Features]
· The 80 Series is a plastic terminal box that is a good match for industrial facilities.
· The box main body and the terminal unit are combined into a single unit, allowing users to really feel benefits in all aspects of their work processes.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Steel Junction Box - Configurable Size, Space Saving, Powder Coated
MISUMI
Ideal for relay applications. 2-Point Screw Type
Configure Now
Ships as soon as | 5 Days |
---|
Enclosures - Sloped Console Case, SKE Series
Takachi Electronics Enclosure
[Features]
・Sloped console case (SKE)
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Type 4X Junction Box, Continuous Hinge with Clamps
HOFFMAN
Used in either indoor or outdoor applications, these enclosures combine a rugged continuous hinge, seamless foam-in-place gasket and stainless-steel screw-down clamps for a reliable seal that protects components from corrosive environments.
[Features]
• Body:14 gauge; Cover 16 gauge 304 stainless-steel
• Seams continuously welded and ground smooth
• Seamless foam in-place gasket
• Stainless-steel screws and clamps
• Stainless-steel continuous hinge pin to remove door
• Weldnuts for mounting optional panels and terminal block kits
• Brushed finish
• 12 x 10 x 6 in.
• IP66 Rating
• Metal: Stainless-steel
• UL, CSA, IEC, & cUL approvals
• Quick release latch
Configure Now
Ships as soon as | 4 Days |
---|
Aluminum Die-Cast Terminal Box, TMA Series
Takachi Electronics Enclosure
[Features]
· This is an aluminum die-cast terminal box which exhibits superior shock resistance corresponding to protection class IP65.
Aluminum die-cast construction is superior to resin in terms of heat dissipation, heat resistance, and oil resistance.
· Terminal lead number ranges from 6P to 30P, and a total of 6 sizes are available.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Control Panel Box - Configurable Size, Dustproof and Waterproof, SPA Series
MISUMI
Supports specifiable sizes with IP54 dust-proof and water-proof performance.
Configure Now
Ships as soon as | 5 Days |
---|
Plastic Control Box - Large, Waterproof
MISUMI
Can be used with control equipment mounted.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Plastic, Hinged Latch, Water/Dust Proof, BCPC Series
Takachi Electronics Enclosure
A waterproof, dustproof latch-hinged polycarbonate plastic box.
[Features]
· Outdoor-use openable box that's easy to maintain.
· A general-purpose plastic box that can be used for various fields such as FA control and electrical construction.
· The BCPC series comes in light gray in 46 sizes, and is made of polycarbonate for heat resistance and flame retardance.
· Protection Grade: IP65, Temperature Range: -20 to +75°C.
[Applications]
· For FA control / electrical construction, outdoor communications devices, wireless devices, control devices, connection box for solar electricity panels, etc.
· Ideal for devices used outdoors.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Handheld Case, Shock-Resistant, Silicone Cover, LCT Series
Takachi Electronics Enclosure
Handheld-type shock-resistant plastic box for protecting your devices.
[Features]
· Handheld case with a silicone cover with shock-resistant design that protects your device from shock from falling, etc.
· Choose from a total of 6 sizes, 8 types of battery configurations and 5 silicone cover colors.
· Marked with + and - to show battery orientation.
· Interior case is made from flame-retardant ABS resin (UL94V-0).
· Temperature range is -10 to 60°C.
[Applications]
· Ideal for various types of handheld devices, such as industrial measuring instruments, inspection devices, wireless communications devices and medical instruments.
Configure Now
Ships as soon as | 5 Days |
---|
Sensor Amplifier Box with Door and Transparent Lid
MISUMI
Sensor amplifier storage box in which display unit can be seen
Configure Now
Ships as soon as | 4 Days |
---|
Metal Control Box (Closed Type)
Kasuga Electric Works
A sturdy steel-plate metal control box.
[Features]
- The BXA series is a metal control box with an IP40 (closed) protective structure.
- Add pilot lamps or control units to make any kind of control box you like.
- The series consists of a bored type with mounting holes drilled into it and a hole-free type ready for cutting.
- The bored type is available in 5 varieties, with anywhere from 1 to 6 mounting holes drilled.
- The hole-free type has the same exterior as the 5 bored varieties.
- Bored type also includes 4 variations in mounting hole size (16 mm, 22 mm, 35 mm, 30 mm).
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Pull Box, Water/Dust Proof, BCAS Series
Takachi Electronics Enclosure
A low-cost, small waterproof plastic box with protection grade IP65 that can be secured with screws.
[Features]
· General-purpose small box with a polyurethane waterproof gasket (packing) that is secured with screws.
Incudes ◎ guide marks on the side to make it easier to drill mounting holes for the optional latch hinges.
[Applications]
· Can be used for various fields such as FA control and electrical construction.
Convenient as a pull box for wiring, relay terminal box, switch box, etc.
* Regarding product numbers [BCAS202016G] and [BCAS081108G], there were some changes to the specifications.
* The change will happen when the current inventory runs out. For details see the manufacturer's website.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Enclosures - Aluminum, Silicone Protector, Water/Dust Proof, AWP Series
Takachi Electronics Enclosure
[Features]
· This aluminum case has a silicon protector for excellent shock resistance.
· The heat-radiating aluminum case has a waterproof rating of IP67, offering a shield function.
· There is an insert groove included inside the body frame enabling the board and chassis to slide in.
· Choose from a total of 240 models (30 sizes available in 8 color specifications).
· Suitable for measuring instruments, control box, communications equipment, etc.
Configure Now
Ships as soon as | 5 Days |
---|
ACHK Series Aluminum Enclosure - U-Shaped, High-Strength
MISUMI
Aluminum enclosures are constructed to house and protect sensitive electrical and electronic components in various settings and applications. Aluminum’s characteristics such as corrosion-resistance, high heat tolerance and natural ability to provide EMI and RFI shielding makes it a suitable choice for certain environments. This Aluminum control box can be used when applications require a metallic enclosure. This control box is designed for indoor use. The enclosure is U-shaped with an iron top cover. This control box does not come equipped with an intermediate plate.
[Features]
• Limited screw-fastening points
• A5052 body material w/ SPCC top cover
• for Indoor use
• U-shaped design
• 3-way design
• No intermediate plate
[Questions?]
Please contact the Electrical team at electrical@misumiusa.com. We will respond shortly. Thank you.
Configure Now
Ships as soon as | 7 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Width W(mm) |
Height H(mm) |
Depth D(mm) |
Material |
Protection function (environmentally resistant) |
Intermediate plate |
Installation |
Representative Standard |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Toyogiken | Takachi Electronics Enclosure | MISUMI | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Toyogiken | Takachi Electronics Enclosure | Takachi Electronics Enclosure | MISUMI | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Toyogiken | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Rittal | Rittal | OHM Electric | Takachi Electronics Enclosure | Takachi Electronics Enclosure | Takachi Electronics Enclosure | MISUMI | Toyogiken | MISUMI | Takachi Electronics Enclosure | HOFFMAN | Takachi Electronics Enclosure | MISUMI | MISUMI | Takachi Electronics Enclosure | Takachi Electronics Enclosure | MISUMI | Kasuga Electric Works | Takachi Electronics Enclosure | Takachi Electronics Enclosure | MISUMI |
Product Series | Enclosures - Plastic, Water/Dust Proof, Hinged Latch, BCAP Series | Enclosures - Polycarbonate Plastic Box with Lock, BCPK Series | Control Panel Box - Configurable Dimensions, Standard, FSB Series | Enclosures - Network Box, Plastic, Water/Dust Proof, WP Series | Enclosures - Polycarbonate, Waterproof/Dust Proof, SPCM Series | Waterproof/Dust Proof Terminal Box with Cable Gland, TMC Series | Steel Junction Box - Configurable Size, Space Saving, Powder Coated | Control Panel Box - Configurable Size, Dustproof and Waterproof, SPA Series | Enclosures - Plastic, Hinged Latch, Water/Dust Proof, BCPC Series | Enclosures - Handheld Case, Shock-Resistant, Silicone Cover, LCT Series | Enclosures - Aluminum, Silicone Protector, Water/Dust Proof, AWP Series | ||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Days to Ship |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 11 Days |
Same Day
Stock Items Included | 5 Days |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days | 4 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included | 5 Days | 7 Days |
Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Type | - | Switchbox | Switchbox | - | Switchbox | - | - | Switchbox | - | - | Switchbox | - | - | Switchbox | - | - | - | - | - | Switchbox | Switchbox | - | - | Switchbox | - | - | Relay box | Others | Others | - | - | - | - | Switchbox | Control box | Others | - | - | - | - | - | - | - | Switchbox | - |
Width W(mm) | 100 ~ 290 | 35 ~ 125 | 90 ~ 630 | 35.4 ~ 125.6 | 230 ~ 430 | 90 ~ 630 | 120 | 90 ~ 600 | 200 ~ 700 | 54.6 ~ 206.3 | 69 ~ 96 | 80 ~ 94 | 74 ~ 101 | 52 ~ 130 | 80 | 190 ~ 380 | 75 ~ 175 | 79 ~ 95 | 185 | 150 ~ 400 | 70 ~ 450 | 40 ~ 120 | 60 ~ 260 | 100 ~ 240 | 1,000 ~ 800 | 150 ~ 800 | 142 ~ 144 | 55 ~ 160 | 33 ~ 50 | 320 ~ 430 | 200 ~ 1200 | 105 | 80 ~ 300 | 320 | 254 | 75 ~ 220 | 200 ~ 600 | 200 ~ 400 | 90 ~ 630 | 76 ~ 105 | 95 ~ 190 | 80 ~ 160 | 50 ~ 201 | 87.4 ~ 213.9 | 100 ~ 500 |
Height H(mm) | 47.5 ~ 107 | 15 ~ 75.3 | 70 ~ 288 | 17 ~ 75 | 44 ~ 177 | 70 ~ 288 | 90 | 37.9 ~ 150.4 | 200 ~ 800 | 38.6 ~ 92 | 19.5 ~ 35 | 40 ~ 50 | 24 ~ 40 | 18 ~ 40 | 100 ~ 200 | 128 ~ 178 | 60 ~ 150 | 20 ~ 33 | 120 | 50.4 ~ 150.4 | 48.3 ~ 98.6 | 27 ~ 50 | 30 ~ 210 | 22.5 ~ 60 | 1,000 ~ 800 | 150 ~ 400 | 49.8 ~ 94.8 | 43 ~ 70 | 24 | 100 ~ 120 | 200 ~ 1600 | 90 | 80 ~ 300 | 150 | 305 | 57.5 ~ 90 | 300 ~ 800 | 120 ~ 200 | 70 ~ 288 | 28 ~ 48 | 35 | 100 ~ 250 | 45 ~ 190 | 53.6 ~ 95.1 | 50 ~ 200 |
Depth D(mm) | 75 ~ 210 | 50 ~ 220 | 120 ~ 830 | 70.4 ~ 250.6 | 231 ~ 330 | 120 ~ 830 | 44.5 | 90 ~ 400 | 100 ~ 400 | 65 ~ 310 | 115 ~ 165 | 23.5 | 120 ~ 171 | 65 ~ 175 | 76 | 190 ~ 560 | 100 ~ 250 | 126 ~ 171 | 69 | 150 ~ 600 | 111 ~ 281 | 60 ~ 180 | 80 ~ 340 | 67 ~ 240 | 120 ~ 350 | 80 ~ 120 | 40.5 ~ 41.5 | 91 ~ 230 | 60 ~ 70 | 254 ~ 350 | 100 ~ 500 | 53 | 70 ~ 150 | 252 | 152.4 | 80 ~ 132 | 100 ~ 400 | 275 ~ 500 | 120 ~ 830 | 121.9 ~ 173.9 | 7.3 | 92 | 65 ~ 250 | 114 ~ 342 | 150 ~ 500 |
Material | Aluminum | Resin | Resin | Resin | Aluminum / Resin | Resin | Resin | Aluminum | Iron | Aluminum | Resin / Others | Resin | Resin / Others | Resin / Others | Iron | Resin | Resin | Resin / Others | Resin | Aluminum | Others | Diecast aluminum | Aluminum | Resin / Others | Iron | Iron | Others | Resin | Resin | Aluminum | Iron | Resin | Iron | Aluminum | Stainless steel | Diecast aluminum | Iron | Resin | Resin | Resin / Others | Aluminum | Iron | Resin | Aluminum | Aluminum |
Protection function (environmentally resistant) | None | None | IP65 | None | None | IP65 | IP65 | None | None | IP67 | None | IP65 | None | IP67 | IP40 | IP65 | IP65 | IP67 | IP65 | None | None | None | None | None | IP66 / IP55 | IP66 | IP67 | IP65 | IP65 | None | None | IP65 | None | None | - | IP65 | IP54 | IP66 | IP65 | None | None | IP40 | IP65 | IP67 | None |
Intermediate plate | Without Circuit Board | - | Others | Without Circuit Board | Others | Others | Without Circuit Board | Others | Iron circuit board | Others | Without Circuit Board | Without Circuit Board | Without Circuit Board | Without Circuit Board | Without Circuit Board | Others | Others | Without Circuit Board | Without Circuit Board | Others | Without Circuit Board | Without Circuit Board | Others | Without Circuit Board | Iron circuit board | Without Circuit Board | Without Circuit Board | Without Circuit Board | - | Without Circuit Board | Iron circuit board | Without Circuit Board | Others | Without Circuit Board | - | - | Iron circuit board | Iron circuit board | Others | Without Circuit Board | - | Without Circuit Board | Others | Others | Without Circuit Board |
Installation | - | Indoor | Unspecified | Unspecified | Indoor | For both indoor/outdoor use / Unspecified | Indoor | - | Indoor | For both indoor/outdoor use | Indoor / Unspecified | Indoor | Indoor / Unspecified | For both indoor/outdoor use | Indoor | - | Unspecified | Indoor | Indoor | - | - | Unspecified | Unspecified | Indoor | Indoor | Indoor | Indoor | Unspecified | Unspecified | - | Indoor | Indoor | Indoor | - | For both indoor/outdoor use | Unspecified | Indoor | Indoor | For both indoor/outdoor use / Unspecified | Indoor | Indoor | Indoor | Indoor | Indoor | Indoor |
Representative Standard | - | UL | CE | UL | - | CE / UL | - | - | - | - | - | - | UL | UL | - | - | CE / UL | UL | - | - | - | - | - | UL | CE / UL / CUL / TUV / CSA | CE / UL / CUL / TUV / CSA | - | - | - | - | - | - | - | - | UL / CUL / CSA | - | - | TUV | CE / UL | - | - | - | - | - | - |
Loading...
[50-1600/10mm Unit(s)][50-1200/1mm Unit(s)]
[50-800/10mm Unit(s)][1000-1900/10mm Unit(s)][50-300/5mm Unit(s)][50-1600/1mm Unit(s)]
[40-1200/10mm Unit(s)][50-500/5mm Unit(s)][50-500/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy