Empowering Engineers with

Configurable Components

Our business hours: Mon. - Fri. 7 a.m. - 9 p.m. ET | Sat. 8 a.m - 5 p.m. ET.

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

Exterior parts

Days to Ship
  • ALL
  • 4 Days or Less
  • 5 Days or Less
  • 6 Days or Less
  • 7 Days or Less
  • 8 Days or Less
  • 10 Days or Less
  • 12 Days or Less
  • 14 Days or Less
  • 15 Days or Less
  • 22 Days or Less
  • Rubber Feet

    Rubber Feet

    MISUMI

    Rich in size / load variation endurance

    CAD
    2D
    Days to Ship
    4 Days
  • Interlock Plug

    Interlock Plug

    DAIWADENGYO

    Safety device that prevents accidents caused by improperly supplied power to safety doors and manufacturing machinery. [Features] · Standard for the SPT series. · A tightening ring, similar to the pushbutton switch on the Φ30 series, makes installation easy. · SPT-11-W model with retention wire on the handle also available (wire length: 280mm)

    Days to Ship
    4 Days
  • Screw-retained Rubber Feet, TM Series

    Screw-retained Rubber Feet, TM Series【10 Pieces Per Package】

    TAKACHI

    Screw-retained Rubber Feet, (TM) [Features] · EVA pad attached to the bottom to prevent slipping.

    CAD
    2D
    Days to Ship
    4 Days
  • Elastomer Screw-Fasting Rubber Feet, A-P Series

    Elastomer Screw-Fasting Rubber Feet, A-P Series【10 Pieces Per Package】

    TAKACHI

    Elastomer Screw-Fasting Rubber Feet [Features] - A rubber-foot elastomer (resin). - Does not move around. - UL94HB standard (excluding AP6).

    CAD
    2D
    Days to Ship
    4 Days
  • 1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug

    1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug

    MISUMI

    This is safety equipment mounted on safety doors and machines which prevents accidents caused by doors and machines being turned on carelessly. Standard Japanese manufactured products that are widely used by major automobile and steel manufacturers.

    Days to Ship
    4 Days
  • “Control Panel Filter 2, H Type” (Flame Retardant)

    “Control Panel Filter 2, H Type” (Flame Retardant)

    HASHIMOTO CLOTH

    [Features] - Flame retardant. - Easy installation with a magnet; protects electronic parts from oil, mist, and dust. - Perforations make it easy to remove dirty filters. - Externally-mounted; check it for dirt at a glance. [Use] - Mount to the control panel air intake to prevent wear and tear on electric components and fans inside the control panel.

    Days to Ship
    4 Days
  • Rubber/Insertion Rubber/Needle Mounting Rubber/Needle Mounting Rubber Feet, B-P Series

    Rubber/Insertion Rubber/Needle Mounting Rubber/Needle Mounting Rubber Feet, B-P Series【10 Pieces Per Package】

    TAKACHI

    Rubber/Insertion Rubber/Needle Mounting Rubber/Needle Mounting Rubber Feet [Features] · Comes with pressure-sensitive adhesive making it possible to peel the back sheet and mount in any position - Please note that natural rubber is subject to color migration.

    CAD
    2D
    Days to Ship
    4 Days
  • Aluminum Plate for Engraving

    Aluminum Plate for Engraving【1-10 Pieces Per Package】

    IMARK

    [Features] - Anodized finish for scratch resistance and ease of working. [Use] - An indoor nameplate for small-scale interiors.

    Days to Ship
    4 Days
  • One Touch Type Rubber Feet, TP Series

    One Touch Type Rubber Feet, TP Series【10 Pieces Per Package】

    TAKACHI

    One-touch Type Rubber Feet [Features] · Rubber foot made of elastomer (resin). · Non-migratory. · UL94HB standard (excluding A-P6).

    CAD
    2D
    Days to Ship
    4 Days or more
  • Box Door Lock, Door Lock, DL Series

    Box Door Lock, Door Lock, DL Series

    OHM ELECTRIC

    No need for cumbersome door opening and closing. One-touch lock requires just a push of the door [Features] ・Opening...a coin or straight slot screwdriver is sufficient. ・Closing...just push on the door. ・No special key is required. ・Simple mounting; does not take up space

    CAD
    2D
    Days to Ship
    4 Days or more
  • Screw-retained Rubber Feet with Aluminum Cover, TC series

    Screw-retained Rubber Feet with Aluminum Cover, TC series【4 Pieces Per Package】

    TAKACHI

    Screw-retained Rubber Feet with Aluminum Cover [Features] · Surface is made from aluminum for a high-quality feel. · Ideal as rubber foot for audio equipment. · Slip preventer attached to the back surface.

    CAD
    2D
    Days to Ship
    4 Days or more
  • Waterproof Cap for Terminal Block Boxes

    Waterproof Cap for Terminal Block Boxes【10 Pieces Per Package】

    TOYOGIKEN

    [Features] Waterproof Cap for Plugging Terminal Block Box Holes, IP67

    Days to Ship
    4 Days
  • Panel Multi-Key

    Panel Multi-Key

    DENSAN

    [Features] - A duplicate key for switchboards and distribution boards. - Works with four different key types.

    Days to Ship
    Quote
  • Air Filter 2 A Type, A Type (Flame Retardant)

    Air Filter 2 A Type, A Type (Flame Retardant)

    HASHIMOTO CLOTH

    [Use] - As a pre-filter for compressors and oil conditioners.

    Days to Ship
    4 Days or more
  • KBOX-Series Dedicated External Mounting Foot Accessories

    KBOX-Series Dedicated External Mounting Foot Accessories【4 Pieces Per Package】

    MISUMI

    KBOXEN-series, dedicated, external-mounting foot

    CAD
    2D
    Days to Ship
    4 Days
  • White-ranging JIS Rack Stowing Shelves, SRJ Series

    White-ranging JIS Rack Stowing Shelves, SRJ Series

    TAKACHI

    Wide JIS Rack Storage Shelf (SRJ) [Features] · Storage shelf for a 19” JIS standard rack. · Can also be installed in a 19” cabinet rack. · Wide, for effective use of storage surface. · Beige and black are available and can be selected in accordance with devices. · On rare occasions, rack opening dimensions will differ by manufacturer, so confirm the dimensions before use.

    CAD
    2D
    Days to Ship
    5 Days
  • Screw-retained DIN Rail Mounted Feet, DRT Series

    Screw-retained DIN Rail Mounted Feet, DRT Series

    TAKACHI

    Screw-retained DIN Rail Mounted Feet (DRT Series) [Features] · Mounting plate used to mount the case, circuit board, and parts on the DIN rail (35 mm). · Installation and removal can be performed easily by pulling on the lower lever.

    CAD
    2D
    Days to Ship
    4 Days
  • Round Needle-mounted Rubber Feet, TB Series

    Round Needle-mounted Rubber Feet, TB Series【10 Pieces Per Package】

    TAKACHI

    Round Needle-mounted Rubber Feet [Features] · Pressure-sensitive adhesive can be peeled away for mounting in position as needed.

    CAD
    2D
    Days to Ship
    4 Days
  • Plastic Terminal Block Box, BOXTM Series Accessories

    Plastic Terminal Block Box, BOXTM Series Accessories

    MISUMI

    Accessories for chemical-proof model terminal block box

    • IP67
    • Plastic
    CAD
    2D
    Days to Ship
    4 Days
  • Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2)

    Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2)

    SHINOHARA

    Replace the filter from the front. The new 20 type with anti-salt specifications available for our popular thin and jet-proof gallery. [Use] - An air-permeable gallery for cubicles and switchboards installed in environments prone to salt damage, such as coastal areas. [Features] - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions. - The inner part shields the filter surface from exposure to the weather, so rainwater will never affect filtration. - Filter can be maintained from the front. - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.) [Material specifications] - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss) - Inner louver: Polypropylene - Salt filter: Salt filter (trapping efficiency: 90%) - Filter case: SUS304, 1.2mm, painted with 5Y7/1 - Waterproof packing: CR sponge - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8 - Conical spring nut: SUS M6 x 8

    CAD
    2D
    Days to Ship
    6 Days
  • Waterproof Sealing Washer, SZ Series

    Waterproof Sealing Washer, SZ Series

    TAKACHI

    Waterproof Sealing Washer (SZ) [Features] - Water bearing pressure: 0.98 MPa (10.0 kgf/cm2) per hour. - Use as ceiling material for the bored parts when boring holes into the box main body and retaining with screws. - NBR (nitrile rubber) is a general purpose rubber that has particularly good oil resistance as a sealing material. - Silicon rubber can be used in a broad range of temperatures and boasts superior heat resistance, cold resistance, and water resistance. - The shape of the rubber used in each model is different, but the performance of each is equivalent.

    CAD
    2D
    Days to Ship
    4 Days or more
  • Extension frame   OPCe series

    Extension frame OPCe series

    TAKACHI

    Extension Frame (OPCE) [Features] · OPCE includes 4 frame screws for fastening to the body and 1 screw head for turning with a screwdriver

    CAD
    2D
    Days to Ship
    4 Days or more
  • VSC Type Vent Filter Patch Type

    VSC Type Vent Filter Patch Type【4-100 Pieces Per Package】

    TAKACHI

    [Features] · Can protect and against condensation and provides air exchange to deal with pressure changes occurring in the case or box as a result of ambient temperature changes. · In addition to water resistance and air permeability characteristics, oil alcohol detergents, etc. are repelled at the filter surface. · An adhesive is combined with a donut conformation to make mounting easy. · Effective for installation on smooth plastic metallic surfaces for which adhesives are readily effective.

    Days to Ship
    4 Days or more
  • "Control Panel Easy Filter" (flame-retardant / thick type)

    "Control Panel Easy Filter" (flame-retardant / thick type)

    TRUSCO

    [Features] • Easily fixed in place and long service life thanks to thick fabric padding • Protects equipment from oil mist and dust • Magnets on the holder for ease of mounting • Perforations allow easy replacement of dirty filters • Replaceable filters for low running costs [Applications] • For use as a control panel filter, or pre-filter for a compressor or oil conditioner. For equipment subject to large air flows

    Days to Ship
    4 Days or more
  • Interlock Plug Clasp

    Interlock Plug Clasp

    DAIWADENGYO

    Fitting for interlock plugs. [Features] · After removing a plug, use the locking clasp to cover the plug and lock it with a key (not included) to prevent accidents caused by inadvertent energizing. Cannot be used with SPTL-11

    Days to Ship
    4 Days
  • Thin jet-proof gallery. Grade: IP45.

    Thin jet-proof gallery. Grade: IP45.

    SHINOHARA

    Replace the filter from the front. The newly-developed inner part ensures air permeability while keeping water out. Now with a much narrower depth. [Use] - An air-permeable gallery for cubicles and switchboards in harsh outdoor conditions exposed to wind and rain. [Features] - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions. - The inner part shields the filter surface from exposure to the weather, so rainwater will never affect filtration. - Filter can be maintained from the front. - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.) [Material specifications] - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss) - Inner louver: Polypropylene - Dustproof filter: nonwoven filter - Filter case: SUS304, 1.2mm, painted with 5Y7/1 - Waterproof packing: CR sponge - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 - Conical spring nut: SUS M6

    CAD
    2D
    Days to Ship
    6 Days
  • Thin jet-proof gallery (salt-resistant specification GTS-45W-ST). Grade IP55 (category 2)

    Thin jet-proof gallery (salt-resistant specification GTS-45W-ST). Grade IP55 (category 2)

    SHINOHARA

    Replace the filter from the front. The new 45 type with anti-salt specifications available for our popular thin and jet-proof gallery. [Use] - An air-permeable gallery for cubicles and switchboards installed in environments prone to salt damage, such as coastal areas. [Features] - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions. - The inner part shields the filter surface from exposure to the weather, so rainwater will never affect filtration. - Filter can be maintained from the front. - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.) [Material specifications] - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss) - Inner louver: Polypropylene - Dust filter: Salt filter (trapping efficiency: 90%) - Filter case: SUS304, 1.2mm, painted with 5Y7/1 - Waterproof packing: CR sponge - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8 - Conical spring nut: SUS M6 x 12

    CAD
    2D
    Days to Ship
    6 Days
  • JIS Rack Stowing Shelf, HRJ Series

    JIS Rack Stowing Shelf, HRJ Series

    TAKACHI

    JIS Rack Stowing Shelf (HRJ) [Features] · Has a heat-dissipating slit, making it optimal for equipment that generates heat. · JIS standard shelf. · On rare occasions, rack opening dimensions will differ by manufacturer, so confirm the dimensions before use.

    CAD
    2D
    Days to Ship
    5 Days
  • Cosmetic Rubber Feet, RS Series

    Cosmetic Rubber Feet, RS Series【4 Pieces Per Package】

    TAKACHI

    Cosmetic Rubber Feet [Features] - Silver/gold hot stamp finishing cosmetic rubber feet. · Ideal as rubber leg for audio equipment. · Anti-slip feature fitted on the back surface.

    CAD
    2D
    Days to Ship
    4 Days or more
  • PC Connector BOX

    PC Connector BOX

    SHINOHARA

    You can do the maintenance and adjustment of the sequencer without opening the door of the control panel. [Features] • AC 100 V outlet in the PC connector BOX (PCB type: 2P E with 2 outlets, PCBK type: 1P with ground) and (standard equipment), data communication connector can be set. You can carry out trial operation adjustments in dusty places without having to open the control panel door (to prevent the intrusion of dust and the like while carrying out the adjustment by test operation). • By attaching the PC connector BOX to the door surface of a sequencer panel or the like that is housed in a find location, adjustment by test operation and maintenance work can be easily carried out. Besides the standard connector for data communication, there are products compatible with the PLCs made by all companies, so please specify the connector and communication cable models.

    CAD
    2D
    Days to Ship
    12 Days
  • Belt Clip, DK Series

    Belt Clip, DK Series

    TAKACHI

    [Features] · Belt Clip (DK)

    CAD
    2D
    Days to Ship
    4 Days
  • Flame Retardant Card Guide Rail, KL-N Series

    Flame Retardant Card Guide Rail, KL-N Series【20 Pieces Per Package】

    TAKACHI

    [Features] · Flame-retardant card guide rail (KL-N)

    CAD
    2D
    Days to Ship
    4 Days or more
  • Long Round Needle-mounted Rubber Feet, TN Series

    Long Round Needle-mounted Rubber Feet, TN Series【10 Pieces Per Package】

    TAKACHI

    Long Round Needle-mounted Rubber Feet [Features] · Pressure-sensitive adhesive can be peeled away for mounting in position as needed.

    CAD
    2D
    Days to Ship
    4 Days
  • Polyurethane Angled Needle Mounted Rubber Feet, SJ-P Series

    Polyurethane Angled Needle Mounted Rubber Feet, SJ-P Series【10 Pieces Per Package】

    TAKACHI

    Polyurethane Angled Needle Mounted Rubber Feet [Features] · Non-migratory. · Pressure sensitive adhesive: rubber.

    CAD
    2D
    Days to Ship
    4 Days
  • Silicon Protector, TWSC Series

    Silicon Protector, TWSC Series【1-2 Pieces Per Package】

    TAKACHI

    [Features] · This is a silicon protector for the TWTWN series. · A total of 6 colors are available. · For compatible cases, see the model information provided below. · Protectors are sold in sets of two. · Can be produced using one of 500 color sets specified by the customer. · Please provide the (Pantone) color number for colors you want. · Also, you can send us a sample of the desired color and we can produce a product having a similar color. · Please note that screws may damage the silicon if over-tightened.

    CAD
    2D
    Days to Ship
    5 Days
  • BCAS・BCAL dedicated hinge   BCH series

    BCAS・BCAL dedicated hinge BCH series

    BOXCO

    [Features] - BCAS/BCAL Dedicated Series (BCH)

    Days to Ship
    4 Days
  • BCAS・BCALdedicated latch   BCL series

    BCAS・BCALdedicated latch BCL series

    BOXCO

    [Features] -BCASBCAL Dedicated Latch (BCL)

    Days to Ship
    4 Days
  • DSHI type hinge

    DSHI type hinge

    ENSTO

    [Features] - A hinge for cover customization

    Days to Ship
    4 Days
  • Latch WQL Series
    Days to Ship
    4 Days
  • Ventilation - VF series

    Ventilation - VF series

    ENSTO

    [Features] · Ventilation (VF)

    Days to Ship
    4 Days
  • Extension frame   OPCe series

    Extension frame OPCe series

    ENSTO

    Extension frame (OPCE) [Features] ▪ OPCE includes 4 frame screws for fastening to the body and 1 screw head for turning with a screwdriver

    Days to Ship
    5 Days
  • Coating Thickness Cover (iron)

    Coating Thickness Cover (iron)

    MIRAIKOGYO

    [Features] · Electrodeposition coating (color: black).

    Days to Ship
    5 Days
  • Coating Substitute Cover (for octagonal configuration)

    Coating Substitute Cover (for octagonal configuration)

    MIRAIKOGYO

    [Features] · Electrodeposition coating (color: black).

    Days to Ship
    5 Days
  • Coating Substitute Cover Joining Frame (Plastic)

    Coating Substitute Cover Joining Frame (Plastic)

    MIRAIKOGYO

    [Features] · No need to use different joining frames for different thicknesses. · This is a good value joining frame which can be cut to the exact thickness required (in 5 mm intervals). · Can be cut easily. · Can be easily cut with a knife.

    Days to Ship
    5 Days
  • Flat Coating Substitute Cover (iron)

    Flat Coating Substitute Cover (iron)

    MIRAIKOGYO

    [Features] · Electrodeposition coating ( black).

    Days to Ship
    5 Days

Configure

Clear All
  • Metric / Inch

    • metric

Narrow search by specifying Manufacturer

Brand

MISUMI's own Brand-Name Product Business
  • C-Value
MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close