Ferrite Cores

• 

  Low Cut Core TRM (Kitagawa Industries)

  Kitagawa Industries

  [Features]
  ・ Mn type ferrite effective against conveyance/radiation noise in the low frequency bands
  ・ Noise filter for low frequency bandwidths with high impedance characteristics in the kHz to several MHz band.
  ・ Because the corners are rounded when coated with epoxy, the load on wiring is reduced.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Low Cut Core (High μ Type) TRMH (Kitagawa Industries)

  Kitagawa Industries

  [Features]
  ・ Impedance is high even in frequency bands of 1 MHz or less, and effective noise countermeasures can be obtained for conveyance noise from 150 kHz.
  ・ Impedance can be firmly boosted by increasing the number of turns, and better noise suppression effects can be expected.
  ・ The core surface is subjected to resin coating, preventing the cable from being scratched on the core edge.
  ・ An abundant variety of size variations is provided. (ø7.2 to ø87.9)

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Compact Ferrite Core - One-Touch (MISUMI)

  MISUMI

  After Wiring, Use in Locations Where Noise is a Concern with a single Touch

  • Space-saving
  • Suitable for EMI countermeasures

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Divided Core, E04SR Series (Seiwa Electric)

  Seiwa Electric

  It can be attached to the cable with one touch
  
  [Features]
  · It uses the high frequency absorption characteristics of ferrite and is excellent in high frequency noise absorption.
  · The ferrite core is integrated with the resin case, and it can be attached to the interface and power cable with one touch.
  · Effective against common mode noise, reducing effect without affecting signal quality.
  · A lineup with flat type ferrite core, effective noise reduction for tight spaces.

  • Volume Discount is available

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  High μ Ferrite Clamp KRFC (Kitagawa Industries)

  Kitagawa Industries

  [Features]
  ・ Effective split ferrite clamp at medium frequency (3 to 50 MHz) band
  ・ Effective noise countermeasures spanning noise terminal voltage (up to 30 MHz) to radiation field strength (30 MHz or higher) bands.
  ・ Split core with resin case mountable on wired cables, and even on cables with connector.
  ・ Band fixing enables support of wire holding and/or fixing of discrete wires. (Excluding KRFC-4)
  ・ Uses the discrete wire guide structure to prevent wiring from getting entangled during winding.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Compact Ferrite Core with Binding Band Attachment (MISUMI)

  MISUMI

  Attaches Firmly with a Binding Band

  • Space-saving
  • Suitable for EMI countermeasures

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Broad Effect Core BRE (Kitagawa Industries)

  Kitagawa Industries

  [Features]
  ・ With resin case to prevent cracking or chipping of ferrite.
  ・ Noise filter for low frequency bandwidths with high impedance characteristics in the kHz to several MHz band.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Low Cut Ferrite Clamp MRFC (Kitagawa Industries)

  Kitagawa Industries

  [Features]
  ・ Optimal for power supply switching noise and motor noise countermeasures.
  ・ Ferrite materials are tuned to support low frequency noise (150 kHz to 30 MHz).
  ・ Optional fixture can be fixed in place with M4 screws. (MRFC-13, MRFC-20)
  ・ Can be fixed in place with M6 screws. (MRFC-H40)

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  One-touch Partitioned Toroidal Core (Takachi Electronics Enclosure)

  Takachi Electronics Enclosure

  One touch split sleeve core
  
  [Features]
  · We are using a clean ferrite core with harmful substances removed from the ferrite material as an environmental measure.
  · The resin case is a non-halogen type UL94V-0 We use certified materials.
  · It is a simple space-saving type with a structure that can also be fixed to equipment.
  · Optional parts for fixing to equipment are screw fastening, or adhesive tape fastening.
  · When fixing to a cable, a supporting tool for a cable tie is also available as an optional part.
  · It is a product realizing environmental measures and low cost.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Easy Lock Ferrite, Ferrite Core (One-Touch Mounting Type) (Denka Electron)【10 Pieces Per Package】

  Denka Electron

  Configure Now

  Ships as soon as	4 Days

• 

  Ferrite Core N F Series (Kowa Kasei)【60-192 Pieces Per Package】

  Kowa Kasei

  [Features]
  · Can easily be attached to split type cables that are already wired.
  · The lock is set so that it will not easily come off.
  [Applications]
  · Digital equipment noise countermeasures (effective against high frequencies)

  Configure Now

  Ships as soon as	4 Days

• 

  Metal Core MPTR (Kitagawa Industries)

  Kitagawa Industries

  [Features]
  ・ Since the saturated magnetic flux density is high compared with ferrite materials, there is no drop in impedance due to current superposition (current 20 A or less),
  and normal mode noise countermeasures are possible.
  ・ Since the materials have a high Curie temperature, their temperature characteristics are stable in environments of -40°C to +85°C,
  and there is no drop in impedance.
  ・ The core surface is subjected to resin coating, preventing the cable from being scratched on the core edge.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

Loading...