Round connector（Page2）

NEW Series

NANABOSHI

Utilizing a one touch locking mechanism, the NEW Series structure demonstrates waterproof and dustproof (IP67) properties at the time of coupling. [Features] · This connector supports European safety standards. · It conforms to EN61984 and is TUV certified. · UL/CSA Standard Certificated. · UL1977. · C22.2 No.182.3. · Protection Circuit Structure · The sequence (priority contact) structure has a ground contact. · Utilizing a one-touch locking mechanism in the coupling method, the structure is waterproof and dustproof at the time of coupling (IP67). · The shell utilizes lightweight and high-strength plastic. · IP67

CAD

2D

BLW Series

NANABOSHI

A BLW Series of waterproof connectors for outdoor with a bayonet locking mechanism. [Features] · The jack effect reduces the force that is required to extract the connector when unlocking. · A special surface process is utilized that is different from conventional surface processing methods. · IP67 EQUIV. · This connector complies with RoHS directives. · Cable assemblies are also available. · These connectors are highly rated by many customers for its high, error-free reliability, turnaround delivery track record. · Insulation resistance: ≥ 2000 MΩ when measured at a specified voltage between the nearest conductors. · Voltage resistance: No electrical short-circuit failure occurs even if the specified voltage is applied between the nearest conductors for one minute. · Contact resistance: ≤ 3 MΩ when a pair of contacts are joined to a regular length. · Vibration resistance: When performing vibration testing, there are no functional problems and the contact resistance is ≤ 3 MΩ. · Shock resistance: When performing shock testing, there are no functional problems and the contact resistance is ≤ 3 MΩ. · Humidity resistance: When performing humidity testing, there are no functional problems and the insulation resistance is ≥ 10 MΩ. Temperature cycle: When performing temperature cycle testing, there are no functional problems and insulation resistance is ≥ 2000 MΩ. · Salt spray: When performing salt spray, there are no functional problems and the contact resistance is ≤ 3 MΩ. · Waterproofing: When the product was subjected to a water pressure of 40 kPa, no evidence of water ingress was detected after 24 hours under normal usage conditions.

CAD

2D

MS3106-Series, Waterproof, Straight Plug

MISUMI

Low cost waterproof • dust-proof IP67-compliant waterproof connector that can be used safely in moist environments when others cannot.

CM10 Waterproof Straight Plug (One-touch Lock)

MISUMI

Manufactured by DDK. Mitsubishi MR-J3 and Yasukawa Σ-V series compatible connector.

MS3108-Series Angle Plug

MISUMI

Japan Airlines electronics industry (JAE), Dai Ichi electronics industry (DDK) models used. Allows cables to be moved in tight spaces.

CAD

2D

NR Straight Plug (One-touch Lock)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. NR connector made from a one-touch model NJC.

NWPC Waterproof Panel Mountable Receptacle (Screw)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. An abundant range of shell sizes are available to suit a wide array of applications.

PLT Relay Adapter (Screw Model)

MISUMI

Space-saving compact size makes it ideal for mounting on equipment

CAD

2D

HR10 Relay Adapter (One-touch Lock)

MISUMI

Manufactured by Hirose Electric. Connector With A Simple and Smart Design.

CAD

2D

NT Series

NANABOSHI

The NT Series was developed for use with industrial equipment power sources and control circuits. [Features] · A connector developed for use with industrial equipment power sources and control circuits. · Lightweight and robust. · Water- and oil-proof structure. · Ground contact included for increased safety. · IP67 equivalent. · Cable assembly also available. · We are highly rated by many customers for our high, error-free reliability, ability to meet deadlines, and high on-time delivery record.

CAD

2D

CMV1 Series One Touch Locking Small Waterproof Connector

DDK

This small, round waterproof plug connector allows one-touch connection using the push on / turn off method, similar to the conventional CM10 (D6) connector.

PRC03 Flange Panel Mount Receptacle (One-touch Lock)

MISUMI

Manufactured by TAJIMI Denki. A wide variation in the number of cores is possible within the same shell size.

CAD

2D

PRC05 Flange Panel Mount Receptacle (One-touch Lock)

MISUMI

Manufactured by TAJIMI Denki. High-density Construction. Ideal for making equipment smaller.

CAD

2D

NJW Waterproof Panel Mountable Receptacle (Screw)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Adopts a special chemically treated surface processing.

CAD

2D

D/MS (D190) Series - Round, Drip-Proof/Waterproof Connectors

DDK

[Features] • D/MS (D190) series connectors are waterproof plugs that are interchangeable with other D/MS connectors and CE02-2A receptacles. • Ideal for external connecting plugs that must be drip-proof and waterproof, especially for industrial equipment such as servomotors. • These connectors are compliant with MIL-DTL-5015, and are interchangeable with other D/MS connectors. • Insert layouts are common between D/MS connector inserts. As for D/MS connectors, 73 insert layouts are available. • Waterproof when coupled to D/MS3102A box receptacles (rated IP67). • If the other connector is a CE02-2A, waterproofing performance is even more reliable.

B Series Connector

LEMO

Connector can function within an operating temperature range of -55°C to +250°C. [Features] ・The connector can function within an electrical unit operating temperature range of -55°C to +250°C

MS3102 Series, Waterproof, Panel-Mount Receptacle

MISUMI

Manufactured by DDK. Can be mounted in either forward or reverse directions.

CAD

2D

NCS Conduit Plug (Screw)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Used By Fastening Onto Conduit.

CAD

2D

NJC JIS Standards Panel Mountable Receptacle (Screw Model)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Made from die-casting for assurance of a rigid shell.

CAD

2D

NR Panel Mountable Receptacle (One-touch Lock)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Adoption of A 5-key Method Guide Allows for Smooth Connection.

WEB Series Round Waterproof Solder Connection Type Connector

DDK

The shell has 5 positioning keys. By changing the key positions, it is possible to prevent mismatching, even when using a large number of connectors with the same contact array. [Features] • The WEB series is a round, waterproof connector with IP67-rated protective structure. • The contact layout uses the same insert as the JM series. • The locking method of the connector has been changed from screw to turn-lock type to increase the connection reliability. • The locking method is turn-lock, allowing locking and release to be confirmed by the click sound when the connector is rotated through 90 degrees. • The solder cup contacts embedded in the insert are aligned in the same direction, making wire connection simple. ▪ UL standard certified: File No. E72124

Environment-resistant Connector (LEB Series: Heat and Vacuum Resistant) Panel Mount Receptacle

MISUMI

LEMO make One-touch connector with high heat resistance and specified to operate in vacuum environments

NCS Relay Adapter (Screw)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Simple yet rigid structure makes it mechanically and electrically stable.

CAD

2D

NRW Waterproof Straight Plug (One-touch Lock)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. NRW one-touch connector with IP67 waterproof functionality.

NWPC Waterproof Straight Plug (Screw)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. NWPC connector with waterproof functions added to NCS.

R03 Relay Adapter (Screw Model)

MISUMI

Manufactured by TAJIMI Denki. Compact Metal Connector with Excellent Metal Strength.

CAD

2D

PLT Angle Plug (Screw Model)

MISUMI

Compact Metal Connector with Excellent Metal Strength

CAD

2D

PLT Panel Mount Receptacle (Screw Model)

MISUMI

Improved work efficiency. Easily fix the body with the nut

CAD

2D

DIN Connector Straight Plug (Plug-in Model)

MISUMI

Manufactured by Marushin Wireless Electric. Compliant with German DIN Standards, Easily Attachable Connector.

CAD

2D

WT Series

NANABOSHI

The WT series has a shaft seal structure when connected. Waterproof function equivalent to IP-X7. [Features] ・An O-ring seal is used on the panel mounting part of the receptacle. ・Based on the NWPC series, a coupling nut (NWPC) is used to improve operability. · Cable assembly also accepted. · We are highly rated by many customers for our reliability, ability to meet deadlines, and high on-time delivery record. ▪ (Insulation resistance) 2, 000 MΩ or more when measured at a specified voltage between conductors which are closest to each other. ・(Withstand voltage) No short circuit or abnormality when the specified voltage is applied for 1 minute between the closest conductors. ・(Contact resistance) Conductor resistance is 3mΩ or less when a pair of contacts are joined to the normal length. ・(Waterproof) No sign of water ingress when left under a water pressure of 100kPa for 2 hours in the normal operating state.

CAD

2D

MS3102-Series, Waterproof, Panel-Mount Receptacle

MISUMI

Rigid panel mount connector.

Bayonet MS Connector Panel Mount Receptacle (Waterproof)

MISUMI

Dai Ichi electronics company (DDK) make. Bayonet MS connector panel mount receptacle.

CAD

2D

MS3102 Bayonet Panel Mount Receptacle (Waterproof)

MISUMI

One-touch bayonet model connector, convenient for connections in tight spaces.

PRC04 Relay Adapter (One-touch Lock)

MISUMI

Manufactured by TAJIMI Denki. One-touch mating model with excellent vibration and shock capacity

CAD

2D

NJW Waterproof Relay Adapter (Screw)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Designed to have waterproof functionality when fitting.

CAD

2D

NRW Waterproof Panel Mountable Receptacle (One-touch Lock)

MISUMI

Manufactured by Seven Star Science Laboratory Ltd. Solder wiring connector that needs no dedicated welding tool.

R04 Waterproof Flange Panel Mount Receptacle (Screw Model)

MISUMI

Manufactured by TAJIMI Denki. Space-saving compact size makes it ideal for mounting on equipment.

CAD

2D

Mini DIN Connector Relay Adapter (Plug-in Model)

MISUMI

Manufactured by Marushin Wireless Electric. Mini DIN connector that is even smaller than a normal DIN connector.

CAD

2D

THB390T/402T Branch T-Shaped Waterproof Relay Connector

TAKACHI

[Features] · A T-shaped cable gland is useful for when you want to branch the cables and link equipment together. · Work can be performed easily via screw connections. · Choose from three types of terminals: 3P, 6P, or 3WP. · Compatible with cables of various wire diameters through use of an optional rubber bushing.

CAD

2D

THB406 Waterproof Panel Mount Connector

TAKACHI

[Features] · Waterproof connector consisting of a set made up of a plug side (male) and socket side (female). · Can be plugged in and removed after installation on panel or housing. · Wire connection uses screws, making the work easy to perform. · For number of terminal poles, 3P and 6P types are available. · For safety purposes, place the connector so that the primary side (socket side) is female and the secondary side (plug side) is male. · The color of the terminal block may vary at the convenience of the manufacturer.

CAD

2D

MS3101 Series, Waterproof, Relay Adapter

MISUMI

Manufactured by DDK. Ideal for extending cables or as a relay between equipment.

CAD

2D

JL05 End Bell

MISUMI

Manufactured by Japan Aviation Electronics Industry Ltd. (JAE). End bell with Waterproof / Non-waterproof Options

PRC03 Relay Adapter (One-touch Lock)

MISUMI

Manufactured by TAJIMI Denki. One-touch mating model with excellent vibration and shock capacity

CAD

2D

Environment-resistant Connector (UTS Series: Waterproof/Climate Resistant) Straight Plug

MISUMI

SOURIAU make Plug with high water and climate resistance

CAD

2D

693 Connector European/Waterproof Straight Male (Screw)

MISUMI

Manufactured by Binder. 693 connector that is lightweight and has IP67 waterproof functionality

CAD

2D