Connector (option, other)

• 

  Compressed Contact Tools and Accessories

  ILME

  Compressed contact tools and accessories

  • Volume Discount

  Days to Ship:	4 Days or more

• 

  MIXO Modular Accessories

  ILME

  MIXO Modular Accessories. Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, USBs, and optical fiber, coaxial, and Dsub9Pin connectors.
  
  [Features]
  · MIXO modular accessories.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, USBs, and optical fiber, coaxial, and Dsub9Pin connectors.

  • Volume Discount

  Days to Ship:	5 Days or more

• 

  17JE Series Hood Kits

  DDK

  The 17JE series hood kit.
  
  [Features]
  • Each hood is made of plastic, making them lightweight and compact.
  • The plastic is nickel plated to provide effective EMI shielding.

  • Volume Discount

  Days to Ship:	Same Day or more

  Stock Items Included

• 

  3M^TM Standard Socket / Header Socket Connector Strain Relief

  3M

  A 79XX Series strain relief for standard socket/header socket connectors.
  
  [Features]
  Compatible with various headers and plug connectors for standard sockets/headers.
  ▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
  ▪ Also supports wiring by pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  · Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
  · Film-based extraction tabs can be attached for extraction (J3490-X).
  ▪ Accessory key can be used to prevent incorrect insertion between the same number of pins (J3435-0000).

  Days to Ship:	4 Days or more

• 

  Round Connector Non-Waterproof Cable Clamp

  DDK

  Non-waterproof cable clamp for round connector

  • Volume Discount

  Days to Ship:	Same Day

  Stock Items Included

• 

  Rubber Bushing

  DDK

  Allows thin cable clamping by using in duplicate or triplicate mounted to the D/MS3057 Cable Clamp.
  
  [Features]
  · The AN3420 is an accessory that is used mounted to the D/MS3057 Cable Clamp for clamping cables securely.
  · By using the AN3420 in duplicate or triplicate, thin cables can also be securely clamped.

  Days to Ship:	4 Days or more

• 

  3M^TM Camera Link Board Mount Connectors, Jack Socket Screw

  3M

  A jack socket screw for Camera Link standard-compliant products
  
  [Features]
  · Supports Camera Link — the interface standard between CCD cameras and frame grabbers.
  · A variety of connectors for assorted implementations—supporting board design.
  · The jack socket screw provides secure panel attachment and cable connector mating.

  Days to Ship:	4 Days or more

• 

  Accessories for Multi-Pole Connector

  ILME

  Accessories for multi-pole connector

  • Volume Discount

  Days to Ship:	5 Days or more

• 

  3M^TM SCR Connector Shell Kit

  3M

  [Features]
  · An EMI shield by means of an internal metal shell.
  · A single-action lock enables attaching/detaching of the connector by one hand.
  · The structure uses two identical pieces to achieve both ease of assembly and strength.

  Days to Ship:	4 Days or more

• 

  Operation Tool (Connection, Disconnection) for MICRO/MINI/MIDI/X-COM®

  WAGO

  You can use the operation tool for easy wiring and unwiring.
  
  [Specifications]
  　●Applicable series: 733/734/769

  Days to Ship:	4 Days or more

• 

  MCS-MIDI Wire Connection Tool

  WAGO

  A tool for use with 231, 232, 721, 722, 723, 731, 732, and 769 Series spring connectors. Connecting and disconnecting wires is made easy by using this tool.

  Days to Ship:	4 Days or more

• 

  Push-in Rivets for D3000 Series

  TE Connectivity

  These are used to secure the panel type of tab housing to the panel.
  
  [Features]
  ・ Used to secure the panel type of tab housing to the panel (Use as an easy mounting type. Not suitable for items with many electrodes or in cases of frequent insertion and removal.)

  CAD ：

  2D

  Days to Ship:	4 Days or more

• 

  3M^TM MDR System Plastic Shell Kit

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · EMI & ESD compatible.
  · Single action lock that can be removed with one hand.
  · Shell finish and strength equivalent to one-piece molding.

  Days to Ship:	4 Days or more

• 

  Waterproof Angle Back Shell for Round Connector

  DDK

  This is a waterproof angle back shell for round connector

  • Volume Discount

  Days to Ship:	Same Day or more

  Stock Items Included

• 

  Strain Relief Housing (Cable Stop Cover) for 734 Series Connector

  WAGO

  MCS-MINI 734 series for the cable stop connector cover.
  
  [Specifications]
  　●Application: CAGE CLAMP® connector for male and female connectors
  　●Applicable pin pitch: 2 types, 3.5 mm and 3.81 mm

  Days to Ship:	4 Days or more

• 

  MR Series Accessories

  Honda Tsushin Kogyo

  Accessories for the MR series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Days to Ship:	4 Days or more

• 

  3M^TM MDR System Non-Shielded Shell Kit (Straight Type)

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Two mating and fixing systems. The jack screw and single-action locking systems can be used to match the application.
  · Compatible with soldered plugs and ordinary pressure contact type plugs.
  · The structure is comprised of two identically shaped pieces for ease of assembly and strength.
  · The ground plate provides efficient shielding.

  • Volume Discount

  Days to Ship:	4 Days or more

• 

  3M^TM MDR System Wire Mounting Receptacle Shell Kit

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Enables extended wire mounting receptacle connections between devices for relay purposes.
  · Latching mechanisms on plug shells can be used without changing.

  Days to Ship:	4 Days or more

• 

  57FE Series Strain Relief

  DDK

  57FE series strain relief

  Days to Ship:	82 Days or more

• 

  COB Type - Panel Supports for Mounting in Control Panels

  ILME

  Connector for internal control panel mounting. Made of flame-resistant thermoplastic resin. Supports DIN rail mounting.
  
  [Features]
  • Connectors made of flame-resistant thermoplastic resin for internal control panel mounting. Supports DIN rail mounting.

  • Volume Discount

  Days to Ship:	5 Days or more

• 

  Strain Relief Plate (Fixed Cable) for The MCS-MINI 734 Series

  WAGO

  Mounts to the MCS-MINI 734 Series connectors to relieve strain on the connected cables wires that are secured by Insulok cable ties.
  
  [Specifications]
  ● Application: For use with CAGE CLAMP® and CAGE CLAMP® S male and female connectors
  ● Applicable pin pitch: 3.5 mm and 3.81 mm (2 types)

  Days to Ship:	4 Days or more

• 

  New Spring Connector 770 (WINSTA) Series Accessories

  WAGO

  New spring-type 770 series connector lock-out cap, coding pin, dust cover, and more are available.

  Days to Ship:	4 Days or more

• 

  Mounting Screw for D2000 and 3000 Series

  TE Connectivity

  This is a mounting screw for the D2000 and 3000 series.
  
  [Features]
  · Taiko Electronics (TE).
  ・ Is a mounting screw for the DL2000 and 3000 series

  CAD ：

  2D

  Days to Ship:	4 Days or more

• 

  Dynamic HTS Module Cable Fitting

  TE Connectivity

  A cable fitting for dynamic connectors developed for heavy duty use.

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  3M^TM MDR System Zinc Diecast Shell Kit

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · An EMI-countermeasure product.
  · Single-action lock that can be removed with one hand.
  · Manufactured from tough diecast zinc.

  Days to Ship:	4 Days or more

• 

  3M^TM Standard Socket / Header Clip Plug Connector Strain Relief

  3M

  [Features]
  · A strain relief for standard socket/header clip plug connectors in the 42XX Series.

  Days to Ship:	4 Days or more

• 

  3M^TM Power Clamp Branch Connector, Y Type

  3M

  [Features]
  - By mating the branch connector with a single-row, board mounting header, it is possible to branch to two headers and electrically connect two wire mount sockets.
  · This product can be used for cross-wiring in CC-Link.
  ▪ Allowable current of up to 10 A per pole.
  · Polarity key prevents incorrect insertions.
  · The single-action lock mechanism makes one-handed attachment and detachment simple, and provides reliable fit and hold.

  Days to Ship:	4 Days or more

• 

  3M^TM Extraction Tab

  3M

  [Features]
  · An extraction tab.

  Days to Ship:	4 Days or more

• 

  Coating Key for Ultra-Compact Connector MCS-MINI 734 Series

  WAGO

  [Specifications]
  　● Application: To prevent mating errors
  　● Mounting: snap-in style
  　● Application: MCS-MINI 734 series for male headers
  　　　　　　　• For male headers: 734-130
  　　　　　　　• For lower-level Double Deck male headers: 734-400
  

  Days to Ship:	4 Days or more

• 

  Dynamic Connector Accessory (Metal Panel Securing Tool)

  TE Connectivity

  Metal panel fixing tool for D3100/D3200 relays.
  
  [Features]
  ・Used for fixing free-hanging tab housings to a panel surface.

  Days to Ship:	4 Days or more

• 

  Branch Connector Series

  Weidmuller

  [Features]
  · M12, 2 branch adapter

  Days to Ship:	4 Days or more

• 

  Cable Bushing for NJC Series

  Nanaboshi Electric Manufacturing

  [Features]
  · A cable bushing for use with the NJC Series.

  Days to Ship:	Same Day or more

  Stock Items Included

• 

  CE01 Series Back Shell

  DDK

  CE01 series back shell.
  
  [Features]
  • Back shells for holding cable when a conduit is not used.
  • Two lengths are available (in shell sizes 22, 24, and 28) for different wiring needs.
  • Use the back shells with cable clamps.

  • Volume Discount

  Days to Ship:	Same Day or more

  Stock Items Included

• 

  CE02-6A, D/MS (D190) Series Back Shell

  DDK

  This is a CE02-6A, D/MS (D190) series back shell

  • Volume Discount

  Days to Ship:	Same Day or more

  Stock Items Included

• 

  CE05 Series Back Shell

  DDK

  CE05 series back shell.
  
  [Features]
  • Waterproof back shells for holding cable when a conduit is not used.

  Days to Ship:	4 Days or more

• 

  CL07 Series Accessories (Waterproof Packing)【100 Pieces Per Package】

  Sumiko Tec

  3 types of waterproof packing are available, to suit the coating of the wires used.

  Days to Ship:	4 Days or more

• 

  Sensor Connector Relay Box

  Murrelektronik

  This is a connector relay box for MURR connectors. Please use when integrating wiring.

  Days to Ship:	5 Days or more

• 

  Cable Clamp

  Provertha

  This is a cable clamp for the PROVERTHA D-sub hood. Please use this product with the PROVERTHA D-sub hood.

  Days to Ship:	4 Days or more

• 

  Stud 17L-002C

  DDK

  Stud (mating securing base).
  [Features]
  · Used when connecting hooded connectors together or to secure a connector to a panel.

  Days to Ship:	4 Days or more

• 

  Comb-Type Jumper (Insulation) for MCS-MIDI Male /Female Connector

  WAGO

  [Features]
  ● Commoning by adjoining jumpers.
  ● The connector plug remains commoned even after it is disconnected.
  ● By using this jumper bar, no additional on-site cables are required.
  ● Easy-to-configure connector circuitry supporting a variety of applications.
  [Specifications]
  ● Applicable pin pitch: 5/5.08 mm ● Terminals: 2 ● Rated current: 12 A

  Days to Ship:	4 Days or more

• 

  Spring Connector Dust Cover

  WAGO

  Spring connector dust cover for the 734, 721, and 231 series. Simply placing the cover on the connector will provide a dust-blocking effect.

  Days to Ship:	12 Days or more

• 

  Coaxial Fixed Attenuator

  Yuetsu Seiki

  [Features]
  · Manufacturers can use these coaxial fixed attenuators with a variety of different connectors for purposes which include adjusting the level of high-frequency signals or measuring standard attenuation.
  · Nominal impedance is 50 Ω. These coaxial fixed attenuators can be used over a broad spectrum.

  Days to Ship:	4 Days or more

• 

  Dynamic Connector Accessory (with Improper Insertion Prevention Key)

  TE Connectivity

  Improper insertion prevention key for D3100 / D3200
  
  [Features]
  · (Used to prevent improper insertion.)
  · Used to prevent insertion mistakes when lining up and using connectors with the same number of leads

  Days to Ship:	4 Days or more

• 

  Non-Reflective Terminator

  Yuetsu Seiki

  [Features]
  · Termination solutions are offered for various types of connectors.
  · Dummy loads are available in nominal impedances of either 50 Ω or 75 Ω.
  · These terminators are designed with low reflection coefficients and low loss, and can be used in a wide range of different measurement systems.

  • Volume Discount

  Days to Ship:	4 Days or more

• 

  Cable Bushing for NR Series

  Nanaboshi Electric Manufacturing

  [Features]
  ・ This is a cable bushing for the NR Series.

  Days to Ship:	Same Day

  Stock Items Included

Loading...