Turning Inserts(Page5)

1,359 items

Hide Filters  XFilter Results
30
45
60
Days to Ship
  • All
  • 4 Days or Less
  • 5 Days or Less
  • 6 Days or Less
  • 7 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 13 Days or Less
  • 14 Days or Less
Brand
Product Series
Days to Ship
Shape
Use
No. of Usable Corners
Work Material
Breaker Application
Rake Angle
Preferred Hand
Nose R
Outer Diameter / Inner Diameter (For Tapping)
Groove Width (For Grooving / Parting)
Thread Type (For Tapping)
No. of Teeth (For Tapping)
Pitch (For Tapping)

    Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting"

      Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-25R "for Intermediate to Rough Cutting"

        Turning Insert Diamond 80°, Negative, with Hole, CNGG120404Z-TN60 "for Intermediate to Rough Cutting"

          Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing"

            Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GP "for Finishing"

              Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GP "for Finishing"

                Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting"

                  Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○CJ "For Finishing to Intermediate Cutting / Pull-Up"

                    Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○TN-V "for Intermediate Cutting"

                      Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GS "for Intermediate to Rough Cutting"

                        Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GS "for Intermediate to Rough Cutting"

                          Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PS "for Intermediate to Rough Cutting"

                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HS "for Intermediate to Rough Cutting"

                              Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PT "for Intermediate to Rough Cutting / High-Feed"

                                Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GT "for Intermediate to Rough Cutting / High-Feed"

                                  Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○ "for Rough Cutting"

                                    Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PH "for Rough Cutting"

                                      Turning Insert Diamond 55°, Negative, with Hole, DNMM15○○PX "Single-Sided / for Rough Cutting / High-Feed"

                                        Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XF "for Finishing / Small Incision" for Mild Steel

                                          Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XP "for Finishing" for Mild Steel

                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XQ "for Intermediate Cutting" for Mild Steel

                                              Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XS "for Rough Cutting" for Mild Steel

                                                Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○MFP-SK, "for Finishing to Intermediate Cutting"

                                                  Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○FP-TK "for Intermediate to Rough Cutting"

                                                    Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○TK, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

                                                      Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○TK, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

                                                        Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MQ, "for Finishing to Intermediate Cutting" for Stainless Steel / Heat Resistant Alloy

                                                          Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MU, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○C "for Rough Cutting" for Cast Iron

                                                              Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○ZS "for Rough Cutting" for Cast Iron

                                                                Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GC "for Rough Cutting" for Cast Iron

                                                                  Turning Insert Diamond 55°, Negative, with Hole, DNMA15○○, without Breaker, for Cast Iron

                                                                    Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Finishing to Intermediate Cutting" for Aluminum / Nonferrous Metals

                                                                      Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Intermediate to Rough Cutting" for Aluminum / Nonferrous Metals

                                                                        Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○ "for Intermediate to Rough Cutting" for Aluminum / Nonferrous Metals

                                                                          Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○-S "for Finishing"

                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○ "for Intermediate Cutting"

                                                                              Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Intermediate Cutting"

                                                                                Square 90°, Negative, with Hole SNMG1204○○-PQ "Finishing to Semi-Finishing"

                                                                                  Square 90°, Negative, with Hole SNMG1204○○-HQ "Finishing to Semi-Finishing"

                                                                                    Square 90°, Negative, with Hole SNMG1204○○-HS "Semi to Rough"

                                                                                      Square 90°, Negative, with Hole SNMG1204○○-PT "Semi to Rough / High-Feed"

                                                                                        Square 90°, Negative, with Hole SNMG0903○○ "Rough Cutting"

                                                                                          Square 90°, Negative, with Hole SNMG1204○○ "Rough Cutting"

                                                                                            Square 90°, Negative, with Hole SNMG1906○○ "Rough Cutting"

                                                                                            Brand

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            Product Series

                                                                                            Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-25R "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 80°, Negative, with Hole, CNGG120404Z-TN60 "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GP "for Finishing"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GP "for Finishing"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○CJ "For Finishing to Intermediate Cutting / Pull-Up"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○TN-V "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GS "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GS "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PS "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HS "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PT "for Intermediate to Rough Cutting / High-Feed"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GT "for Intermediate to Rough Cutting / High-Feed"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○ "for Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PH "for Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMM15○○PX "Single-Sided / for Rough Cutting / High-Feed"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XF "for Finishing / Small Incision" for Mild Steel

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XP "for Finishing" for Mild Steel

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XQ "for Intermediate Cutting" for Mild Steel

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○XS "for Rough Cutting" for Mild Steel

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○MFP-SK, "for Finishing to Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○FP-TK "for Intermediate to Rough Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○TK, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○TK, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MQ, "for Finishing to Intermediate Cutting" for Stainless Steel / Heat Resistant Alloy

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MU, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○C "for Rough Cutting" for Cast Iron

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○ZS "for Rough Cutting" for Cast Iron

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GC "for Rough Cutting" for Cast Iron

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMA15○○, without Breaker, for Cast Iron

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Finishing to Intermediate Cutting" for Aluminum / Nonferrous Metals

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Intermediate to Rough Cutting" for Aluminum / Nonferrous Metals

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○ "for Intermediate to Rough Cutting" for Aluminum / Nonferrous Metals

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○-S "for Finishing"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○ "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Intermediate Cutting"

                                                                                            Square 90°, Negative, with Hole SNMG1204○○-PQ "Finishing to Semi-Finishing"

                                                                                            Square 90°, Negative, with Hole SNMG1204○○-HQ "Finishing to Semi-Finishing"

                                                                                            Square 90°, Negative, with Hole SNMG1204○○-HS "Semi to Rough"

                                                                                            Square 90°, Negative, with Hole SNMG1204○○-PT "Semi to Rough / High-Feed"

                                                                                            Square 90°, Negative, with Hole SNMG0903○○ "Rough Cutting"

                                                                                            Square 90°, Negative, with Hole SNMG1204○○ "Rough Cutting"

                                                                                            Square 90°, Negative, with Hole SNMG1906○○ "Rough Cutting"

                                                                                            Days to Ship 4 Days or more 5 Days or more 5 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 5 Days or more 5 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 5 Days or more 5 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 5 Days or more
                                                                                            ShapeC (80° Diamond)C (80° Diamond)C (80° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)D (55° Diamond)S (Square)S (Square)S (Square)S (Square)S (Square)S (Square)S (Square)
                                                                                            UseOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner DiameterOuter Diameter / Inner Diameter
                                                                                            No. of Usable Corners444444444444444442444444444444444444448888888
                                                                                            Work MaterialSteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast IronSteel / Stainless SteelSteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast IronSteel / Stainless SteelSteel / Cast IronSteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast IronSteel / Stainless SteelSteel / Stainless Steel / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast IronSteel / Stainless Steel / Heat-Resistant Alloy, Titanium AlloySteel / Stainless SteelSteel / Stainless Steel / Cast IronSteel / Cast IronSteelSteel / Stainless SteelSteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast IronSteel / Stainless SteelSteelSteel / Stainless SteelHeat-Resistant Alloy, Titanium AlloyStainless Steel / Heat-Resistant Alloy, Titanium AlloyStainless Steel / Heat-Resistant Alloy, Titanium AlloyStainless Steel / Heat-Resistant Alloy, Titanium AlloyCast IronCast IronSteel / Cast IronSteel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloyCast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloyCast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloyCast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium AlloySteel / Stainless SteelSteel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast IronSteel / Stainless Steel / Heat-Resistant Alloy, Titanium AlloySteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium AlloySteel
                                                                                            Breaker ApplicationMedium CuttingMedium - Heavy CuttingMedium - Heavy CuttingFinishFinishFinishMedium CuttingMedium CuttingMedium CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium CuttingHeavy CuttingHeavy CuttingFinishFinishMedium CuttingHeavy CuttingMedium CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium CuttingMedium - Heavy CuttingHeavy CuttingHeavy CuttingHeavy CuttingMedium CuttingMedium CuttingMedium - Heavy CuttingMedium - Heavy CuttingFinishMedium CuttingMedium CuttingMedium CuttingMedium CuttingMedium - Heavy CuttingMedium - Heavy CuttingMedium CuttingMedium CuttingMedium Cutting
                                                                                            Rake AngleNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegative
                                                                                            Preferred HandRight / LeftRight / LeftNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandRight / LeftNo Preferred HandNo Preferred HandRight / LeftRight / LeftRight / LeftNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred HandNo Preferred Hand
                                                                                            Nose R0.4 ~ 0.80.4 ~ 0.80.40.2 ~ 1.20.4 ~ 0.80.2 ~ 0.80.4 ~ 1.20.8 ~ 1.20.80.4 ~ 0.80.4 ~ 1.20.4 ~ 1.60.4 ~ 1.20.8 ~ 1.20.8 ~ 1.20.4 ~ 1.20.8 ~ 1.60.8 ~ 1.60.4 ~ 0.80.4 ~ 0.80.4 ~ 0.80.8Others0.40.4 ~ 0.80.4 ~ 0.80.4 ~ 0.80.4 ~ 0.80.4 ~ 1.20.8 ~ 1.20.8 ~ 1.20.4 ~ 0.80.4 ~ 0.80.4 ~ 0.80.4 ~ 0.80.2 ~ 0.80.4 ~ 0.80.4 ~ 0.80.4 ~ 1.20.4 ~ 1.20.8 ~ 1.60.8 ~ 1.20.4 ~ 0.80.4 ~ Others1.2 ~ 1.6
                                                                                            Outer Diameter / Inner Diameter (For Tapping)---------------------------------------------
                                                                                            Groove Width (For Grooving / Parting)---------------------------------------------
                                                                                            Thread Type (For Tapping)---------------------------------------------
                                                                                            No. of Teeth (For Tapping)---------------------------------------------
                                                                                            Pitch (For Tapping)---------------------------------------------

                                                                                            Loading...

                                                                                            Related Categories to Turning Inserts