Grooving & Cut-Off Holders(Page3)

146 items

Hide Filters  XFilter Results
30
45
60
Days to Ship
  • All
  • 4 Days or Less
  • 5 Days or Less
  • 7 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 12 Days or Less
  • 16 Days or Less
  • 17 Days or Less
Brand
Product Series
Days to Ship
Use
Groove Width(mm)
Maximum Processing Diameter(mm)
Maximum Groove Depth(mm)
Preferred Hand
No. of Corners Used by Tip
Shank Height(mm)

    Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)

      Inner Diameter Shallow Groove Holder KIGBA Type

        Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type

          Large Inner Diameter Deep Grooved Holder [for TG Tip] Compatible Chip

            Large Inner Diameter Deep Grooved Holder [for GH/GHU Tip] KIGH Type

              Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)

                Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip

                  Small Bore End Surface Slotting, EZ Bar Conforming Tip

                    Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar)

                      Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)

                        Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

                          Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

                            Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)

                              Grooved End Face Holder (Split Type) KGDF Type

                                Grooved End Face Blade KGDF Type

                                  Multi-Functional / End Face Grooving Holder KFMS Type

                                    Multi-Functional / End Face Grooving Holder KFMS-8 Type

                                      Grooved End Face Blade KFTB-S Type

                                        Compatible Chip for Grooved End Face Blade

                                          Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

                                            Slit Tip (For Small Diameters) TKF Type

                                              Cutter Holder (for Sub Spindle Small Diameter) KTKFS Type

                                                Slit Tip GDG Type

                                                  Slit Tip GDMS Type

                                                    Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)

                                                      Cutter Holder TKR/L Type

                                                        Punching Blade KTKB-SS Type

                                                          Tool Block for Holding Blade, KTKTB Type (Split Type)

                                                            Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)

                                                              Cutter Holder (Integrated Type) KTKH-S Type

                                                                QS Holding System for CoroCut XS Bit

                                                                  T-Max Q-Cut Boring Bit for End Surface Grooving

                                                                    T-Max Q-Cut Plunging/Grooving Shank Bit

                                                                      CoroCut 1/2 Plunging/Grooving Boring Bit

                                                                        CoroCut 1/2 Profile Machining Shank Bit

                                                                          CoroCut 3 Plunging/Grooving Shank Bit

                                                                            CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2

                                                                              CORO-TURN SL70, HP Cutting Head for Grooving

                                                                                CORO-TURN SL70, HP Cutting Head for Edge Grooving

                                                                                  COROMANT CAPTO, Cutting Head for CoroCut 3

                                                                                    Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving

                                                                                      CoroCut 1/2 Head For Grooving

                                                                                        CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070

                                                                                          High Coat Paratip (for Cutting/Grooving) Holder

                                                                                            Kyocera Mill Routing Tip Holder

                                                                                            Brand

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            KOSHUHA

                                                                                            KYOCERA

                                                                                            Product Series

                                                                                            Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)

                                                                                            Inner Diameter Shallow Groove Holder KIGBA Type

                                                                                            Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type

                                                                                            Large Inner Diameter Deep Grooved Holder [for TG Tip] Compatible Chip

                                                                                            Large Inner Diameter Deep Grooved Holder [for GH/GHU Tip] KIGH Type

                                                                                            Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)

                                                                                            Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip

                                                                                            Small Bore End Surface Slotting, EZ Bar Conforming Tip

                                                                                            Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar)

                                                                                            Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)

                                                                                            Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

                                                                                            Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

                                                                                            Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)

                                                                                            Grooved End Face Holder (Split Type) KGDF Type

                                                                                            Grooved End Face Blade KGDF Type

                                                                                            Multi-Functional / End Face Grooving Holder KFMS Type

                                                                                            Multi-Functional / End Face Grooving Holder KFMS-8 Type

                                                                                            Grooved End Face Blade KFTB-S Type

                                                                                            Compatible Chip for Grooved End Face Blade

                                                                                            Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

                                                                                            Slit Tip (For Small Diameters) TKF Type

                                                                                            Cutter Holder (for Sub Spindle Small Diameter) KTKFS Type

                                                                                            Slit Tip GDG Type

                                                                                            Slit Tip GDMS Type

                                                                                            Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)

                                                                                            Cutter Holder TKR/L Type

                                                                                            Punching Blade KTKB-SS Type

                                                                                            Tool Block for Holding Blade, KTKTB Type (Split Type)

                                                                                            Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)

                                                                                            Cutter Holder (Integrated Type) KTKH-S Type

                                                                                            QS Holding System for CoroCut XS Bit

                                                                                            T-Max Q-Cut Boring Bit for End Surface Grooving

                                                                                            T-Max Q-Cut Plunging/Grooving Shank Bit

                                                                                            CoroCut 1/2 Plunging/Grooving Boring Bit

                                                                                            CoroCut 1/2 Profile Machining Shank Bit

                                                                                            CoroCut 3 Plunging/Grooving Shank Bit

                                                                                            CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2

                                                                                            CORO-TURN SL70, HP Cutting Head for Grooving

                                                                                            CORO-TURN SL70, HP Cutting Head for Edge Grooving

                                                                                            COROMANT CAPTO, Cutting Head for CoroCut 3

                                                                                            Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving

                                                                                            CoroCut 1/2 Head For Grooving

                                                                                            CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070

                                                                                            High Coat Paratip (for Cutting/Grooving) Holder

                                                                                            Kyocera Mill Routing Tip Holder

                                                                                            Days to Ship 5 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 5 Days or more 4 Days or more 5 Days or more 4 Days or more 4 Days or more 4 Days or more 5 Days or more 4 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 4 Days or more 4 Days or more
                                                                                            Use---------------End Face Grooving--------------Outer Diameter Grooving / Cut OffInner Diameter Grooving / End Face Grooving / ProfileOuter Diameter Grooving / Cut Off / ProfileInner Diameter Grooving / ProfileOuter Diameter Grooving / Side-Feed / ProfileOuter Diameter Grooving / Cut OffEnd Face Grooving / Side-FeedOuter Diameter Grooving / Side-FeedEnd Face Grooving / Side-FeedOuter Diameter Grooving / Cut OffInner Diameter Grooving / ProfileOuter Diameter Grooving / ProfileOuter Diameter Grooving / Cut Off / Side-Feed / Profile-End Face Grooving
                                                                                            Groove Width(mm)---------------3 ~ 5(6)--------------0.7-2.03 ~ 62 ~ 62 ~ 64 ~ 61.52.5 ~ 63 ~ 154 ~ 61.5-----
                                                                                            Maximum Processing Diameter(mm)---------------30 ~ ∞--------------------44 ~ 1000-300 ~ 50012.8-----
                                                                                            Maximum Groove Depth(mm)-------------------------------5.3 ~ 1515 ~ 329 ~ 134 ~ 56.412 ~ 1815 ~ 65406.4-----
                                                                                            Preferred HandRight HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight HandedRight Handed / Left HandedNo Preferred HandRight HandedRight Handed / Left HandedLeft HandedLeft HandedRight HandedRight HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedNo Preferred HandRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedNo Preferred HandNo Preferred HandRight Handed / Left HandedRight Handed / Left Handed----Right Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight Handed / Left HandedRight HandedLeft HandedRight Handed / Left HandedNo Preferred Hand--
                                                                                            No. of Corners Used by Tip------------------------------2 Corner1 Corner1 Corner2 Corner2 Corner3 Corner2 Corner1 Corner / 2 Corner2 Corner3 Corner2 Corner1 Corner2 Corner--
                                                                                            Shank Height(mm)---------------20 ~ 25--------------10 ~ 1623 ~ 3716 ~ 3230 ~ 4720 ~ 3212 ~ 32------25 ~ 3216 ~ 25-

                                                                                            Loading...

                                                                                            Related Categories to Grooving & Cut-Off Holders