MenuClose
Threading Tools
Select a subcategory
Dies
Forming Taps
Hand Taps
Pipe Taps
Spiral Point Taps
Spiral Flute Taps
Tap Wrenches
Thread Mills
Threading Repair & Extraction Tools
Threading Tools
| Days to Ship |
|
|---|
-
Point Tap for Difficult-to-Cut Materials EH-PO
YAMAWA
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.Configure Now
Ships as soon as 4 Days -
For American Tapered Pipe Thread for Pipes (Short Thread Type) S-NPT (YAMAWA)
YAMAWA
•Thread Types : Pipe Taper
•Thread Size (Nominal) : 1-¦-11.5, 1-¦1/2-11.5, 1-¦1/4-11.5, 1/16-27, 1/2-14, 1/4-18, 1/8-27, 2-¦-11.5, 3/4-14, 3/8-18
•Number of Chamfered Threads (Lcf) : 3P
•Tool Material Type : High-Speed Steel
•Work Material : Alloy Steel (SCM), Brass (Bs), Brass Cast Iron (BsC), Cast Iron (FC), Cast Steel (SC), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Nickel-Based Alloy (Inconel Equivalent), Titanium Alloy (Ti-6Al-4V Equivalent), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
•Bore Model : For Blind Holes, For thru Holes
For complete product overview and details on For American Tapered Pipe Thread for Pipes (Short Thread Type) S-NPT, see the sections below:Configure Now
Ships as soon as 4 Days -
Spiral Tap Series, General Purpose EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Configure Now
Ships as soon as 4 Days -
Gas Pipe Tap (American Screw) Taper NPT (SKC)
SKC
•Thread Size (Nominal) : NPT11/2, NPT11/4, NPT11/8, NPT13/4, NPT21/2, NPT21/4, NPT1, NPT1/16, NPT1/2, NPT1/4, NPT1/8, NPT2, NPT3, NPT3/4, NPT3/8, NPT5/8, NPT7/8
•Pitch (P), Thread Count : 11 1/2, 14, 18, 27, 8
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
For complete product overview and details on Gas Pipe Tap (American Screw) Taper NPT, see the sections below:Configure Now
Ships as soon as 4 Days -
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Configure Now
Ships as soon as Same Day Stock Items Included
-
Trapezoidal Thread Machine Tap (SKC)
SKC
•Thread Types : Trapezoid
•Thread Size (Nominal) : Red, TM10, TM12, TM14, TM16, TM18, TM20, TM22, TM24, TM25, TM26, TM28, TM30, TM32, TM36, TM40, TR10, TR16, TR20, TW10, TW12, TW16, TW18, TW20, TW22, TW24, TW25, TW26, TW28, TW30
•Pitch (P), Thread Count : 12, 2, 3, 4, 5, 6, 8, Red
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Point Tap
For complete product overview and details on Trapezoidal Thread Machine Tap, see the sections below:Configure Now
Ships as soon as 4 Days -
Model A Tap Series, Point Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Configure Now
Ships as soon as 4 Days -
Carbide Tap for Ultra High Hardness Steel UH-CT
YAMAWA
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Configure Now
Ships as soon as 4 Days -
Solid Die D for Metric Threads
YAMAWA
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.Configure Now
Ships as soon as 4 Days -
Pg Conduit Thread Tap (German Standard) (SKC)
SKC
•Thread Types : Others
•Thread Size (Nominal) : PG11, PG13.5, PG16, PG21, PG29, PG36, PG42, PG7, PG9
•Tool Material Type : High-Speed Steel
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Pipe Tap
For complete product overview and details on Pg Conduit Thread Tap (German Standard), see the sections below:Configure Now
Ships as soon as 4 Days -
Hand Tap for Left-Hand Threads HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Configure Now
Ships as soon as 4 Days -
Drill Tap Series Drill Tap DRT
OSG
Very effective in improving productivity thanks to enabling continuous tap hole drilling using the tip drill part and screw tapping processing at the tap part
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 7 Days -
Titanium Coating Roll Tap R+V/R-V
YAMAWA
A coating roll tap suitable for threading steel and nonferrous materials.
Configure Now
Ships as soon as 4 Days -
Spiral Tap Series, for Stainless Steel EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Configure Now
Ships as soon as 4 Days -
For Tapered Screw for Pipe (Long Screw Type) PT
YAMAWA
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Configure Now
Ships as soon as 4 Days -
ISHIHASHI
•Thread Types : Meter
•Thread Size (Nominal) : M10, M12, M3, M4, M5, M6, M8
•Tap Model : Tapping Related Tools
For complete product overview and details on Drilling Tap, see the sections below:Configure Now
Ships as soon as 4 Days -
Model A Tap Series, Spiral Tap A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Configure Now
Ships as soon as 4 Days -
YAMAWA
The spiral tap is ideal for machining blind holes as scrap is discharged from the grooves twisted in the same direction as the threads.
[Features]
· The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
· Intermittent cutting of female threads with key groove is also possible.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining blind holes.
* N-SP models will transition to SP as soon as stock runs out.Configure Now
Ships as soon as 4 Days -
Tap Handle (Female Thread Cutting Tap Handle) (SK 11)
SK 11
•Thread Size (Nominal) : M1n+P6, M2n+P10, M5n+P13
For complete product overview and details on Tap Handle (Female Thread Cutting Tap Handle), see the sections below:Configure Now
Ships as soon as 7 Days -
High-Speed Steel Point Tap 【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Configure Now
Ships as soon as Same Day Stock Items Included
-
Point Tap Series V Coating V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Configure Now
Ships as soon as 4 Days -
Grooveless Tap Series VP New Roll VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Configure Now
Ships as soon as 4 Days -
H AND H
Allows threading with one hand even in narrow spaces. Clean female threading is possible.
Configure Now
Ships as soon as 4 Days -
Tap For Parallel Pipe Thread (PS Screw)
Trusco Nakayama
[Features]
· Tap for parallel pipe thread.
[Applications]
· Work materials: cast iron, light metals.Configure Now
Ships as soon as 4 Days -
TSUBOSAN
[Features]
· One unit can be used for 8 pitch types.
· Stripped screw threads can be repaired.
[Applications]
· For when screw threads have been crushed at work sites.Configure Now
Ships as soon as 4 Days -
TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Configure Now
Ships as soon as Same Day Stock Items Included
-
Configure Now
Ships as soon as Same Day Stock Items Included
-
Taper Tap Series for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Configure Now
Ships as soon as 4 Days -
Tapered Tap Series for American Piping General Use (NPT) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipes
Configure Now
Ships as soon as 4 Days -
Threading Round Die Series, Threading Round Die for Stainless Steel, Solid Type, SUS-SD (HSS)
OSG
[Specifications]
· Shape: Die
· Screw type: metric
· Coating: Non-Coated
· Tool material: HSSConfigure Now
Ships as soon as 4 Days -
SKC
•Thread Types : Trapezoid
•Thread Size (Nominal) : TM10, TM12, TM14, TM16, TM18, TM20
•Work Material : Brass (Bs), Brass Cast Iron (BsC), Bronze (PB), Cast Aluminum Alloy (AC, ADC), Cast Iron (FC), Cast Steel (SC), Copper (Cu), Ductile Cast Iron (FCD), High-Carbon Steel (C Content Exceeding 0.45%), Low-Carbon Steel (C Content of 0.25% or Less), Medium-Carbon Steel (C Content 0.25 - 0.45%), Rolled Aluminum Material (AL), Tool Steel (Before SKD Quenching), Zinc Alloy Castings (ZDC)
•Tap Model : Die
For complete product overview and details on SKS Table Screw Die, see the sections below:Configure Now
Ships as soon as 4 Days -
For American Tapered Pipe Thread for Pipes (Long Thread Type) NPT
YAMAWA
Tap for machining American taper pipe "NPT" female threads.
[Features]
· The groove is a straight hand tap type. Comes with three biting teeth at the tip.
· General-purpose tap for general steel materials.
[Applications]
· To be used when machining American tapered pipe thread for pipes "NPT" female thread.
* American standard pipe threads, available in many types, can be complicated.
* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Hand Tap/Die Set (for Metric Screws)
Trusco Nakayama
[Features]
· It is a set of hand-taps from M3 to M16, 38-diameter circular dies, tap handle, tap holder and die handle that can be used to make and clean coarse threaded holes and threads.
· A set item convenient for storage.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.
[Material]
· Low Alloy Steel (SKS)Configure Now
Ships as soon as 4 Days -
Thread Repair Tool Set, Tap Die Set (LIGHTSEIKI)
LIGHTSEIKI
•Tap Model : Oil-Hole Tap
For complete product overview and details on Thread Repair Tool Set, Tap Die Set, see the sections below:- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
High-Speed Steel Spiral Tap 【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Configure Now
Ships as soon as Same Day Stock Items Included
-
Parallel Tap Series for Pipes Spiral Tap SFT-SPT
OSG
Spiral types have been made available for blind holes to match the form of the workpiece.
Configure Now
Ships as soon as 4 Days -
Trusco Nakayama
[Features]
· Ratchet type with excellent workability.
· Forward/reverse rotation can be switched for efficient threading.
[Applications]
· For tap threading.Configure Now
Ships as soon as Same Day Stock Items Included
-
For Parallel Screw for Pipe (Long Shank) LS-PF
YAMAWA
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Configure Now
Ships as soon as 4 Days -
Taper Tap Series for Pipes TiN Coating, Long Shank TIN-LT-TPT
OSG
[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: TiN
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [○] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Tempered Steel (25 to 35HRC) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○]Configure Now
Ships as soon as 4 Days -
Threading Round Die Series Pipe General Threading Round Die RD-S
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: Alloy HSS (SKS)Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA | SKC | OSG | YAMAWA | YAMAWA | OSG | SKC | MISUMI | SKC | OSG | YAMAWA | YAMAWA | SKC | YAMAWA | OSG | ISHIHASHI | YAMAWA | OSG | YAMAWA | ISHIHASHI | OSG | YAMAWA | SK 11 | MISUMI | OSG | OSG | H AND H | Trusco Nakayama | TSUBOSAN | MISUMI | MISUMI | OSG | OSG | OSG | SKC | YAMAWA | ISHIHASHI | Trusco Nakayama | LIGHTSEIKI | MISUMI | OSG | Trusco Nakayama | YAMAWA | OSG | OSG |
| Product Series | For American Tapered Pipe Thread for Pipes (Short Thread Type) S-NPT (YAMAWA) | Tapered Tap Series for American Piping General Use (NPT) TPT | Threading Round Die Series, Threading Round Die for Stainless Steel, Solid Type, SUS-SD (HSS) | For American Tapered Pipe Thread for Pipes (Long Thread Type) NPT | Taper Tap Series for Pipes TiN Coating, Long Shank TIN-LT-TPT | Threading Round Die Series Pipe General Threading Round Die RD-S | |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days |
| Thread Types | Meter | Meter | Meter / Unified / Wit / Perforation | Meter / Unified / Perforation | Pipe Taper | Meter / Unified | - | Meter | Trapezoid | Meter / Unified | Meter | Meter | Others | Meter | Meter | - | Meter | Meter / Unified / Wit | Pipe Taper | Meter | Meter / Unified | Meter / Unified / Wit / Perforation | - | Meter | Meter | Meter / Unified | - | Pipe Parallel | - | Meter | - | Pipe Taper | Pipe Taper | Meter | Trapezoid | Pipe Taper | Meter | Meter | - | Meter | Pipe Parallel | - | Pipe Parallel | Pipe Taper | Meter / Unified / Wit / Perforation |
| Thread Size (Nominal) | M3 ～ M24 | M2 ～ M120 | No0UN ～ M100 | No.0-80UNF ～ M30 | 1´-11.5 ～ 3/8-18 | 1UN ～ M56 | NPT1 ～ NPT7/8 | M3 ～ M10 | TM10 ～ TM40 | 1/2-20UNF ～ M24 | M2 ～ M20 | M1 ～ M30 | PG7 ～ PG42 | M1 ～ M30 | M3 ～ M16 | - | M1 ～ M6 | 1UN ～ M42 | 1′-11 ～ 7/8-14 | M3 ～ M12 | 1-8UNC ～ M56 | No.1-64UNC ～ M48 | M1～6 ～ M5～13 | M2 ～ M12 | M3 ～ M24 | M1 ～ M12 | - | 1 ～ 3/8 | - | M3 ～ M10 | M3 - M10 ～ M5 - M12 | R1 ～ R7/8 | NPT1 ～ NPT4 | M2 ～ M10 | TM10 ～ TM20 | 1´-11.5 ～ 3/8-18 | M3 ～ M10 | - | - | M2 ～ M12 | G1 ～ G3/8 | M3～10 ～ M5～13 | 1´-11 ～ 3/8-19 | Rc1 ～ Rc3/8 | 1UN ～ M58 |
| Pitch (P), Thread Count(mm) | 0.5 ～ 3 | 0.25 ～ 4 | 0.25 ～ 80 | 0.2 ～ 3 | - | 0.25 ～ 48 | 8 ～ 27 | 0.5 ～ 1.5 | 2 ～ 12 | 0.25 ～ 3 | 0.4 ～ 2.5 | 0.25 ～ 3.5 | 16 ～ 20 | 0.25 ～ 3.5 | 0.5 ～ 2 | - | 0.25 ～ 1 | 0.4 ～ 48 | - | 0.5 ～ 1.75 | 0.25 ～ 5.5 | 0.25 ～ 4 | - | 0.4 ～ 1.75 | 0.5 ～ 3 | 0.25 ～ 56 | - | - | 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00 ～ 10、11、12、14、16、18、20、24F | 0.5 ～ 1.5 | - | 11 ～ 28 | 8 ～ 27 | 0.35 ～ 1.5 | 2 ～ 4 | - | 0.6 ～ 1.5 | - | - | 0.4 ～ 1.75 | 11 ～ 28 | - | - | 11 ～ 28 | 0.25 ～ 64 |
| Number of Chamfered Threads (Lcf) | 4.5P | 1.5P ～ 9P | 1.5P ～ 9P | 1.5P ～ 5P | 3P | 2.5P ～ 3P | - | 1.5 P ～ 9 P | - | 5P | 5P | - | - | 1.5P ～ 5P | 5P | - | 2P ～ 4P | 2.5P ～ 3P | 2.5P | - | 1.5P ～ 2.5P | 2.5P | - | 5 P | 5P | 2P ～ 4P | - | 4.5-Shaped | - | 2 P ～ 4 P | - | 2.5P | 2.5P | - | - | 3P | - | - | - | 2.5 P | 2.5P | - | 3.5P | 2.5P | - |
| Tool Material Type | Cobalt High-Speed Steel | - | High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | - | Vanadium High-Speed Steel | - | Powdered High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | - | High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | - | Powdered High-Speed Steel / Vanadium High-Speed Steel | High-Speed Steel | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | - | Alloy High-Speed Steel | - | Vanadium High-Speed Steel | - | High-Speed Steel | High-Speed Steel | High-Speed Steel | - | High-Speed Steel | - | - | - | Vanadium High-Speed Steel | High-Speed Steel | - | High-Speed Steel | Vanadium High-Speed Steel | Alloy High-Speed Steel |
| Work Material | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | High-Hardness Steel (50 - 60 HRC)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] | - | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - | - | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | - | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Heat-Treated Steel (25 - 35 HRC)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | - |
| Tap Model | Point Tap | Hand Tap | Hand Tap | Hand Tap | Pipe Tap | Spiral Tap | Pipe Tap | Hand Tap | Point Tap | Point Tap | Point Tap | Die | Pipe Tap | Hand Tap | Tapping Related Tools | Tapping Related Tools | Rolled Tap | Spiral Tap | Pipe Tap | Tapping Related Tools | Spiral Tap | Spiral Tap | - | Point Tap | Point Tap | Rolled Tap | Tap Wrenches | Pipe Tap | Repair / Removal Tool | Rolled Tap | Tap Wrenches | Pipe Tap | Pipe Tap | Die | Die | Pipe Tap | Hand Tap | Hand Tap | Oil-Hole Tap | Spiral Tap | Pipe Tap | Tap Wrenches | Pipe Tap | Pipe Tap | Die |
| Bore Model | For Through Holes | - | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | - | For Through Holes / For Blind Holes | - | For Through Holes | For Through Holes / For Blind Holes | - | - | For Through Holes / For Blind Holes | - | - | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | - | For Blind Holes | For Blind Holes | - | For Through Holes | For Through Holes | For Blind Holes | - | For Through Holes | - | For Through Holes / For Blind Holes | - | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | - | For Through Holes / For Blind Holes | - | - | - | For Blind Holes | - | - | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - |
| Coating Presence | None | - | None | None | None | None | - | None | - | Included | Included | None | - | None | None | None | Included | None | None | Included | Included | None | - | None | Included | Included | - | None | - | Included | - | None | None | None | - | None | - | None | - | None | None | - | None | Included | None |
| Coating Type | - | - | Non-Coated | - | - | Non-Coated | - | - | - | Others | TiAlN | - | - | - | Non-Coated | Non-Coated | TiN | Non-Coated | - | Others | Others | - | - | - | TiCN | TiCN | - | - | - | TiN | - | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | - | - | Non-Coated | - | - | TiN | Non-Coated |
| Overall Length (L)(mm) | 46 ～ 120 | - | 30 ～ 275 | 36 ～ 135 | 54 ～ 120 | 30 ～ 205 | 54 ～ 152.4 | 46 ～ 75 | 160 ～ 370 | 34 ～ 120 | 40 ～ 105 | - | 85 ～ 135 | 36 ～ 135 | 62 ～ 159 | - | 36 ～ 62 | 40 ～ 175 | 55 ～ 170 | 55 ～ 110 | 34 ～ 250 | 36 ～ 195 | - | 40 ～ 82 | 46 ～ 120 | 30 ～ 82 | - | 55 ～ 95 | 230 | 46 ～ 75 | 110 | 55 ～ 170 | 55 ～ 170 | - | - | 54 ～ 155 | - | - | - | 40 ～ 82 | 55 ～ 110 | 85 ～ 315 | 100 ～ 200 | 100 ～ 150 | - |
Loading...
Configure
Filters
-
Thread Types
-
Metric / Inch
-
Thread Size (Nominal)
- CTG-54
- CTC-51
- CTG-42
- CTC-39
- CTG-36
- CTC-31
- CTG-28
- CTC-25
- CTG-22
- CTC-19
- CTG-16
- CTC-15
- No0UN
- No.0-80UNF
- NO.10
- No.10
- S0.1
- No.1-72UNF
- No.1-64UNC
- No.10-32UNF
- No.10-24UNC
- No.12-28UNF
- No.12-24UNC
- S0.2
- No.2-64UNF
- No.2-56UNC
- S0.3
- No.3-56UNF
- No.3-48UNC
- NO.4
- No.4
- S0.4
- No.4-48UNF
- No.4-40UNC
- S0.5
- No.5-44UNF
- No.5-40UNC
- No.6
- S0.6
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- BC1
- G1
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PS1
- PT1
- R1
- Rc1
- Rp1
- S1
- W1
- 1'-14UNF
- 1'-14UNS
- 1'-12UNF
- 1´-11.5
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1"1/2U
- 1"1/2UN
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11.5
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4U
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11.5
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- NPT1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-14UNEF
- 1'1/8-12UNF
- 1′1/8-11
- 1 1/8-8UN
- 1'1/8-7UNC
- 1'1/8W7
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PS1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- NPT1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1"3/8U
- 1"3/8UN
- BSF1"3/8
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PS1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1/4SM24
- 1/4SM40
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1'8UNC
- 1'W8
- 1/8
- 1/8PT
- 1/8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1/8SM40
- 1/8W40
- 1/8SM44
- M1～10
- 1´11.5
- 1'12UNF
- 1'14UNS
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- 1'20UNEF
- M1.1
- M1.2
- S1.2
- BC1.37
- M1.4
- S1.4
- M1.5
- M1.6
- M1.7
- M1.8
- 2U
- 2UN
- BSF2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- W2
- W/2
- 2´-11.5
- 2´-11
- 2′-11
- 2-8UN
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2´1/2-11
- 2′1/2-11
- 2´1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- NPT2"1/4
- R2"1/4
- W2"1/4
- 2′1/4-11
- W2"1/8
- 2"3/4UN
- R2"3/4
- W2"3/4
- W2"3/8
- 2'4.5UNC
- 2'W4.5
- M2～4.5
- W2"7/8
- M2～8
- M2～10
- 2'12UN
- M2.2
- M2.3
- M2.5
- M2.6
- 3UN
- G3
- M3
- M3.0
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- W3
- 3´-11
- 3′-11
- 3´-8
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3´1/2-11
- 3′1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PS3/4
- R3/4
- Rc3/4
- Rp3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- 3/8W
- BC3/8
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3～12
- 3/16UN
- SM3/16
- W3/16
- 3/16W24
- 3/16SM28
- 3/16SM32
- SM3/32
- W3/32
- 3/32SM56
- M3.5
- 4M
- 4UN
- G4
- M4
- M4.0
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- №4-40UNC
- 4´-11
- 4′-11
- 4M0.75
- W4"1/2
- M4～6
- M4～10
- M4～13
- M4～14
- M4.5
- 5M
- CTV5
- M5
- M5.0
- No5UN
- TV5
- №5-40UNC
- 5/8UN
- G5/8
- NPS5/8
- NPT5/8
- PS5/8
- R5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5～10
- M5 - M12
- M5～12
- M5～13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5/32W32
- M5.5
- 6UN
- M6
- M6.0
- No6UN
- No6UNJ
- W6
- No6-40UNF
- №6-32UNC
- M6～20
- M6.5
- W6.8
- M7
- PG7
- W7
- 7/8UN
- G7/8
- NPS7/8
- NPT7/8
- PS7/8
- R7/8
- W7/8
- W"7/8
- 7/8-20UNEF
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32UN
- SM7/32
- W7/32
- 7/32W24
- 7/32SM32
- M7.5
- 8UN
- CTV8
- M8
- M8.0
- No8UN
- No8UNJ
- TV8
- W8
- №8-32UNC
- M8.5
- M9
- PG9
- 9/16UN
- BC9/16
- UNF9/16
- W9/16
- 9/16-24UNEF
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- W9.5
- W9.8
- 10UN
- M10
- M10.0
- No10UN
- No10UNJ
- TM10
- TR10
- TV10
- TW10
- W10
- №10-32UNF
- №10-24UNC
- M10～13
- M10～25
- M10～30
- M11
- PG11
- W11
- W11/16
- SM11/32
- SM11/64
- 11/64SM40
- M12
- M12.0
- M]12
- No12UN
- TM12
- TW12
- W12
- W12.5
- M13
- W13
- W13/16
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- TM14
- TW14
- W14
- M15
- W15
- W15/16
- SM15/64
- 15/64SM28
- M16
- M16.0
- PG16
- TM16
- TR16
- TW16
- W16
- M17
- W17
- M18
- M18.0
- TM18
- TW18
- W18
- M19
- W19
- M19～32
- M19～33
- M19～38
- M19～42
- M20
- M20.0
- TM20
- TR20
- TW20
- W20
- W20.32
- M21
- PG21
- W21
- M22
- M22.0
- TM22
- TW22
- W22
- M23
- W23
- M24
- M24.0
- TM24
- TW24
- W24
- M25
- TM25
- TW25
- W25
- M25～50
- M25～60
- M25～70
- M25～72
- M26
- TM26
- TW26
- W26
- M27
- W27
- M28
- TM28
- TW28
- W28
- M29
- PG29
- W29
- M30
- TM30
- TW30
- W30
- M32
- TM32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- M36
- PG36
- TM36
- W36
- M37
- M38
- W38
- M39
- W39
- M40
- TM40
- W40
- M42
- PG42
- W42
- M42～120
- M43
- M44
- W44
- M45
- W45
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- M54
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M78
- M80
- M82
- M85
- M90
- M95
- M100
- M110
- M115
- M120
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Thread Count(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Heat-Treated Steel (45 - 55 HRC)
- High-Hardness Steel (50 - 60 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- ESCO (555)
- OSG (247)
- YAMAWA (149)
- SKC (64)
- Trusco Nakayama (61)
- ISHIHASHI (35)
- Nachi-Fujikoshi (17)
- NOGA JAPAN (13)
- TANOI (10)
- GUHRING (8)
- DC SWISS (7)
- Rennsteig Tools (7)
- H AND H (6)
- SANDVIK (6)
- KUKKO (5)
- ONISHI (5)
- Hozan (4)
- SK 11 (3)
- EIKOSHA (2)
- LIGHTSEIKI (2)
- RUKO (2)
- ENGINEER (1)
- Kanetec (1)
- NS TOOL (1)
- NEWSTRONG (1)
- TSUBOSAN (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Threading Tools
-
- Carbide End Mills
- Concrete Drill Bits
- Chamfering & Centering Tools
- Core Drill Bits
- Crinkey Cutters
- Custom Size Straight Flute End Mills
- Cutting Tool Accessories
- Drill Bits
- Electric Drill Bits
- Hole Saws
- HSS End Mills
- Magnetic Drill Press Cutters
- Milling Inserts & Holders
- Reamers
- Specialized Cutters
- Step Drills
- Threading Tools
- Turning Tools
- Wood Drills & Cutters
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy