All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Positioning Stages & Optical / Inspection Components
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- Connector
- Wire/Cable
- Crimp terminal
- Equipment supported cable
- Zip tie
- Cable gland
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Protection tube
- Duct/Wiring
- General purpose tool
- Dedicated tools
- Soldering supplies
- Personal computer/AV cable
- LAN/Network cable
- Cable with connector
- RS232C Cable
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Milling Cutter Insert / Holder
- Customized Straight Blade End Mill
- Dedicated Cutter
- Turning Tool
- Drill
- Screw Hole Related Tools
- Reamer
- Chamfering, Centering Tool
- Cutting Tool Related Equipment
- Step Drill
- Hole Saw
- Clean Key Cutter
- Core Drill (Tip Tool)
- Magnetic Drilling Machine Cutter
- Drill for Electric Drill
- Woodworking Drill Cutter
- Drill for Concrete
- Processing Tools
- Material Handling & Storage
- Tape Supplies
- Cushioning
- Stretch Film
- Cardboard
- Plastic Bag
- PP Band
- Magic Tape / Binding Tape
- Rubber Band
- String / Rope
- Cable Tie
- Label
- Labeler
- Cutter for Unpacking
- Packing Support Equipment
- Cloth / Sheet for Packing
- Carriage / Hand Truck
- Tool Wagon
- Tool Cabinet / Container Rack
- Lifter / Hand Pallet
- Container / Pallet
- Storage Supplies
- Shelf / Rack
- Workbench
- Hanging Clamp / Hanging Belt
- Jack / Winch
- Chain Block / Crane
- Bottle / Container
- Bike Storage
- Safety & General Supplies
- Lab & Clean Room Supplies
- General-purpose Equipment for Research
- Measurement Equipment for Research
- Research Equipment / Storage / Transportation Supplies
- Culture / Separation / Analysis Supplies
- Laboratory Containers
- Laboratory Essentials
- Laboratory Equipment
- Washing / Sterilization / Cleaning Supplies
- Clean Environment-Related Equipment
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components for Molding
- Components of Large Mold, Die Casting
- Injection Molding Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Chamfering, Centering Tool
Select a subcategory
Centering / Countersink
Chamfering, V Groove
Inner Reamer
Replaceable Blade Model Chamfering Tool / Tip / Blade
| Days to Ship |
|
|---|
-
Center Drill, Okabe Standard, Type 1 90°
OKABE
A center drill manufactured with tempering using the best heat treatment
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
High Speed Coating for Center Boy Throwaway Bit【1-5 Pieces Per Package】
DAISHOWASEIKI
[Features]
· Shows outstanding sharpness as it has a cutting edge with precision finishing.
· Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.Days to Ship: 4 Days or more -
NIKKENKOSAKU
Provides the best finished surface for any material. Has a pilot cone with spring and eliminates the need for centering. Includes a blade for iron.
Days to Ship: 4 Days or more -
- New Products
TiN Coated High-Speed Steel Countersink with Holes/90°
MISUMI
Now offering the frequently used standard sizes at affordable prices (C-Value)
Days to Ship: 4 Days or more -
Corner Radius Cutter for Carbide Steel and Stainless Steel ALD Coating
IWATATOOL
[Features]
· The raking blades/flutes ensure a highly precise rounded form.
· First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracyDays to Ship: 4 Days or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shot
- Non-Coated
- Aluminum
- 2 Flutes
Days to Ship: 4 Days or more -
TiAlN Coated Carbide Center Drill, 60° Chamfering Model/Regular, Long
MISUMI
Carbide center drill ideal for centering during mass production drilling
- Volume Discount
Days to Ship: 4 Days or more -
Days to Ship: Same Day or more Stock Items Included
-
OKABE
A center drill manufactured with tempering using the best heat treatment
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute
MISUMI
Standard Chamfering and V Grooving Type [Note: When V groove machining, a flat surface is left on the core thickness portion]
- TS
- General Steel
- 2 Flutes
Days to Ship: Same Day or more Stock Items Included
-
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single, highly efficient tool that's capable of centering, chamfering, and V grooving (Note: V grooving will leave a flat surface the thickness of the core. Ensure that you take core thickness into account)
Days to Ship: 4 Days or more -
TiAlN Coated High-Speed Steel Center Drill, Regular Model
MISUMI
TiAlN-coated version of the popular center drill
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
FUJIGEN
[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.Days to Ship: 4 Days or more -
Center Drill, JIS B Type 60°x120°
OKABE
A center drill manufactured with tempering using the best heat treatment
Days to Ship: 4 Days or more -
MISUMI
Non-coated design enables the edge of the tip to stand achieving superior chamfer performance.
Days to Ship: 4 Days or more -
- New Products
TiN Coated High-Speed Steel Countersink/3-Flute/90° 6-Size Set
MISUMI
Now offering the frequently used standard sizes in a set at an affordable price (C-Value)
Days to Ship: Same Day Stock Items Included
-
2-Flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
TS Coated Carbide Inner R-Cutter for High-Hardness Steel Machining, 4-Flute/Short Model
MISUMI
MISUMI's original inner R cutter that specializes in high hardness steel machining
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Days to Ship: 4 Days or more -
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade
MISUMI
The helix blade suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
- TS
- SUS
- 2 Flutes
Days to Ship: 4 Days or more -
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
Days to Ship: 4 Days or more -
Leading Drill, Carbide FX Coating FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
Days to Ship: 4 Days or more -
C-Cutter Mini, 1-Flute Front-Chamfering Type
DAISHOWASEIKI
[Features]
· 1-flute type front chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.
· Ultra-high feed machining achieves dramatic reductions in chamfering time.Days to Ship: 4 Days or more -
CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank
OKAZAKI
A holed type. For non-ferrous metals. All products are TiN coated.
Days to Ship: 4 Days or more -
High Speed Chamfering Tool TOGLON® Multi Chamfer
IWATATOOL
[Features]
· Toglon-shaped 5-flute chamfering dedicated model
· Ultra-high speed machining with suppressed burrs is possible for light chamfering
[Applications]
· Work materials: Mild steel, carbon steel, alloy steel, tempered steel, stainless steel, titanium alloyDays to Ship: 4 Days or more -
TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
MISUMI
TiAlN coated version of the popular spot drill
Days to Ship: 4 Days or more -
Days to Ship: Same Day or more Stock Items Included
-
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
FAGCCRC FA Coated Carbide Corner Rounding Cutter
S&K
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· Carbide FA coating improves machining efficiency, provides a long life, and enables high precision finished surface machiningDays to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Counter Sink【1-6 Pieces Per Package】
Trusco Nakayama
[Features]
· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.
[Applications]
· Work materials: Iron, casting, stainless steel.
· Chamfering.
· Deburring.
· For countersinking.Days to Ship: 4 Days or more -
C-Cutter Mini, Multi-Flute Front/Back-Chamfering Type
DAISHOWASEIKI
[Features]
· Multiple-flute type front and back chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.
· Ultra-high feed machining achieves dramatic reductions in chamfering time.
· Supports a wide range of machining, such as front chamfering, back chamfering, and face milling.Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Use |
| Point Angle(θ) |
| Tool Diameter (D)(mm) |
| Work Material |
| Single Blade / Double Blade |
| Peripheral Blade Availability |
| Tool Material Type |
| Coating Presence |
| Coating Type |
| R Size ( R )(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Brand | OKABE | TAIYO TOOL | OSG | DAISHOWASEIKI | NIKKENKOSAKU | MISUMI | IWATATOOL | MISUMI | MISUMI | MISUMI | OKABE | KOPAL | MISUMI | MISUMI | MISUMI | S&K | FUJIGEN | OKABE | MISUMI | MISUMI | OSG | NINE9 | FUJIGEN | DAISHOWASEIKI | MISUMI | MISUMI | OSG | OSG | NS TOOL | OSG | S&K | FUJIGEN | DAISHOWASEIKI | OKAZAKI | IWATATOOL | MISUMI | MISUMI | ILIX | FUKUDA | S&K | NINE9 | Trusco Nakayama | DAISHOWASEIKI | 7 LEADERS | ATI |
| Product Series | High Speed Coating for Center Boy Throwaway Bit【1-5 Pieces Per Package】 | Corner Radius Cutter for Carbide Steel and Stainless Steel ALD Coating | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | TiAlN Coated Carbide Center Drill, 60° Chamfering Model/Regular, Long | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiN Coated High-Speed Steel Countersink/3-Flute/90° 6-Size Set | TS Coated Carbide Inner R-Cutter for High-Hardness Steel Machining, 4-Flute/Short Model | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade | CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank | TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack | |||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more |
Same Day
Stock Items Included | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more |
| Specifications |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
| Use | Centering (Positioning) | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | R Chamfer | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) | Centering (Positioning) / Hole Chamfer | Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | R Chamfer | Hole Chamfer | R Chamfer | Centering (Positioning) / Chamfering / Horizontal | Chamfering / Horizontal | Hole Chamfer | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Hole Chamfer | R Chamfer | R Chamfer | Centering (Positioning) / Engraving | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | - |
| Point Angle(θ) | 90 | - | 90 | 90 ～ 120 | 90 | - | - | 90 | - | - | 60 | - | 60 ～ 120 | 60 ～ 120 | - | - | 90 ～ 118 | 60×120 | - | - | - | 90 | - | 90 ～ 120 | - | 90 | 60 ～ 120 | 60 ～ 130 | - | 60 ～ 120 | - | - | 30 ～ 60 | 90 | 90 | 90 | - | 90 | - | - | 45 ～ 60 | 90 | 45° | 90 | Cutter Tip Angle: 100° |
| Tool Diameter (D)(mm) | 0.3 ～ 10 | 25 ～ 55 | 3 ～ 25 | - | - | 10 ～ 35 | 3 ～ 5 | 3 ～ 12 | 0.5 ～ 5 | 1 ～ 5 | 0.5 ～ 10 | - | 3 ～ 16 | 0.5 ～ 2 | 1 ～ 4 | 9 ～ 76 | 13.5 ～ 16.15 | 0.5 ～ 10 | 0.3 ～ 2 | 6.3/8.3/10.4/12.4/16.5/20.5 | 0.5 ～ 1.5 | 16 ～ 20 | - | - | - | 3 ～ 12 | 3 ～ 25 | 0.5 ～ 25 | 0.8 ～ 12.1 | 4.3 ～ 37 | 9 ～ 46 | - | - | 10 ～ 55 | - | 2 ～ 12 | 1 ～ 5 | 4.3 ～ 37 | - | 4 ～ 14 | 0.45～2.1 ～ 0.65～2.7 | - | - | 0.5 ～ 20 | - |
| Work Material | General Steel[○] | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[○] | General Steel[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | - | Aluminum[○] / Copper[○] | - | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | - | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | - |
| Single Blade / Double Blade | Double Blade | Single Blade | Single Blade | - | Single Blade / Double Blade | Single Blade | Single Blade | Single Blade | Double Blade | Double Blade | Double Blade | Single Blade / Double Blade | Single Blade | Single Blade | Double Blade | - | Single Blade | Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | - | Single Blade | Single Blade | Single Blade | Single Blade | - | Single Blade | - | - | - | Single Blade | - | Single Blade | Double Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | - | - | - |
| Peripheral Blade Availability | None | - | None | None | None | None | None | None | None | None | None | - | None | Included | None | None | None | None | None | None | None | None | - | None | None | None | None | None | - | Included | None | - | None | None | - | None | None | Included | None | None | None | None | None | - | - |
| Tool Material Type | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | - | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | High-Speed Steel | High-Speed Steel | - | Carbide | Carbide | High-Speed Steel | Cobalt High-Speed Steel | - | High-Speed Steel | Carbide | High-Speed Steel | Carbide | - | - | High-Speed Steel | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | High-Speed Steel | Cobalt High-Speed Steel | - | - | Cobalt High-Speed Steel | - | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Cobalt High-Speed Steel | - | Carbide | - |
| Coating Presence | None | None | Included | Included | - | Included | Included | None | Included | None | None | - | Included | Included | Included | None | None | None | None | Included | Included | None | Included / None | Included | Included | Included | Included | Included | Included | Included | Included | Included / None | - | Included | - | Included | None | None | None | Included | Included | None | - | Included | - |
| Coating Type | Non-Coated | Non-Coated | TiCN | TiN | - | TiN | Others | - | TiAlN | - | Non-Coated | - | Ts | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | - | TiN | TiAlN | Non-Coated | TiAlN / Non-Coated | TiN | Ts | Ts | TiN | TiAlN | TiAlN | Others | TiCN | TiAlN / TiN / Non-Coated / AlCrN | - | TiN | Non-Coated / ALT | TiAlN | - | Non-Coated | Non-Coated | TiAlN | TiAlN / TiN | - | - | Others | - |
| R Size ( R )(mm) | - | - | - | - | - | - | 0.5 ～ 3 | - | - | - | - | - | - | - | - | 0.5 ～ 30 | - | - | - | - | 0.1 ～ 2 | - | 5 ～ 10 | - | 0.5 ～ 3 | - | - | - | 0.1 ～ 5 | - | 0.5 ～ 15 | - | - | - | - | - | - | - | 0.5 ～ 30 | 0.5 ～ 5 | - | - | - | - | - |
Loading...
Configure
Stock
-
- Stock Items Included
Specification/Dimensions
-
Use
-
Metric / Inch
-
Point Angle(θ)
-
Tool Diameter (D)(mm)
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.55
- 0.6
- 0.63
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1～2.12
- 1 to 2.5
- 1–6
- 1/8
- 1/16
- 1/32
- 1/64
- 1.1
- 1.2
- 1.25
- 1.25～2.65
- 1.3
- 1.4
- 1.5
- 1.5 to 4
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2
- 2～4.25
- 2~5
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.5 to 6.5
- 2.6
- 2.7
- 2.8
- 2.9
- 2.95
- 3
- 3–6
- 3–8
- 3~14
- 3 to 15
- 3/16
- 3～22
- 3/32
- 3/64
- 3.1
- 3.15
- 3.15～6.7
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4～8.5
- 4–10
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5～10.6
- 5–12
- 5/16
- 5/32
- 5/64
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6~15
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3～13.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8 to 17
- 8.2
- 8.3
- 8.4
- 8.8
- 9
- 9.0-9.4
- 9.1
- 9.4
- 9.5
- 9.5-9.9
- 9.52
- 10
- 10.0-10.4
- 10～21.2
- 10.1
- 10.3
- 10.4
- 10.5
- 10.5-10.9
- 10.8
- 11
- 11.0-11.4
- 11.1
- 11.2
- 11.4
- 11.5
- 11.5-11.9
- 11.88
- 12
- 12.0-12.4
- 12.1
- 12.3
- 12.4
- 12.5
- 12.5-12.9
- 12.7
- 13
- 13.0-13.4
- 13.4
- 13.5
- 13.5-13.9
- 14
- 14.0-14.4
- 14.2
- 14.4
- 14.5
- 14.5-14.9
- 14.6
- 15
- 15.0-15.9
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.0-16.9
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.0-17.9
- 17.1
- 17.7
- 18
- 18.0-18.9
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.5
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- 30.20
- 30.5
- 31
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- 41
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 75.5
- 76
- 80
- 90
- 95
- 100
-
Work Material
-
Single Blade / Double Blade
-
Peripheral Blade Availability
-
Tool Material Type
-
Coating Presence
-
Coating Type
-
R Size ( R )(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- 3.25
- 3.5
- 3.75
- 4
- 4RM
- 4RY
- 4.25
- 4.5
- 4.75
- 5
- 5RM
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.25
- 8.5
- 8.75
- 9
- 9.5
- 10
- 10.5
- 11
- 11~15
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16–20
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Brand
-
- ESCO (136)
- FUJIGEN (77)
- YAMAWA (56)
- IWATATOOL (53)
- NOGA JAPAN (46)
- GUHRING (34)
- OKABE (23)
- EIKOSHA (21)
- OSG (21)
- ILIX (17)
- DAISHOWASEIKI (15)
- ATOM (10)
- NINE9 (9)
- STARM (9)
- NIKKENKOSAKU (8)
- S&K (8)
- KYOWASEIKO (7)
- OKAZAKI (7)
- TAIYO TOOL (6)
- FUKUDA (5)
- RUKO (5)
- Trusco Nakayama (5)
- DIJET (4)
- DIXI (4)
- ALPEN (3)
- ASAHI TOOLS (3)
- ISCAR JAPAN (3)
- MAPAL (3)
- Poulten&Graf (3)
- ATI (2)
- KOPAL (2)
- NTTOOLS (2)
- SKC (2)
- 7 LEADERS (1)
- EARTH MAN (1)
- H AND H (1)
- NS TOOL (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Chamfering, Centering Tool
-
- Carbide End Mill
- HSS End Mill
- Milling Cutter Insert / Holder
- Customized Straight Blade End Mill
- Dedicated Cutter
- Turning Tool
- Drill
- Screw Hole Related Tools
- Reamer
- Chamfering, Centering Tool
- Cutting Tool Related Equipment
- Step Drill
- Hole Saw
- Clean Key Cutter
- Core Drill (Tip Tool)
- Magnetic Drilling Machine Cutter
- Drill for Electric Drill
- Woodworking Drill Cutter
- Drill for Concrete
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy