MenuClose
Concrete Drill Bits
| Days to Ship |
|
|---|
-
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 5 Days -
Hex Shaft Bit HEX Type (Unika)
Unika
[Features]
· Hammer drill dedicated bit that efficiently transmits striking torque without loss.
· The integral design from the chuck part to the cutting edge makes it effective in through hole and deep hole machining.
· Bits for drilling pilot holes for anchors or bits for stone (for slope construction) are also available.
· Supports a wide range of work requirements. * Use the dedicated stone material type for drilling stone.
· Applicable Motor: Hammer DrillConfigure Now
Ships as soon as 4 Days -
Hex Shaft Rechargeable Screwdriver Bit (6.35 Hex Shaft) (Trusco Nakayama)
Trusco Nakayama
[Features]
· Use of 6.35 mm hexagonal shank improves torque transmission efficiency.
· An integrated shape from the shank to blade tip for safety.
[Applications]
· Work materials: Block, mortar, brick, plasterboard, etc.Configure Now
Ships as soon as 5 Days -
Unika
[Features]
· The blade tip is a cross blade which can penetrate a deck plate.
· Can make a hole close to a perfect circle, allowing anchors to be inserted smoothly.
· The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize biting even when reinforced steel bar is struck.Configure Now
Ships as soon as 12 Days -
Configure Now
Ships as soon as 4 Days -
Unika
[Features]
· Outstanding sharpness and durability support materials from general stone to difficult-to-cut granite.
· Provides effective power transmission due to the "slip-proof" engraving on the shank.
· Because the cutting edge is cooled with water before boring, the edge has more cutting ability and durability.Configure Now
Ships as soon as 4 Days -
Drill Bit for Vibration B Type (Straight Shank) Set (Unika)
Unika
[Features]
· Achieves fantastic cutting quality by using an ultra-hard tip with excellent durability, and employing a specially designed blade tip shape and angle.
[Applications]
· Work materials: Concrete, blocks, marble, gypsum boards, tiles.
[Set Contents]
· 3.2, 3.5, 4.3, 4.5, 4.8, 5.0 mm (total length 85 mm) x 1 pc each
· 6.0, 6.4 mm (total length 100 mm) 1 pc each
· 8.0, 8.5 mm (total length 125 mm) 1 pc eachConfigure Now
Ships as soon as 4 Days -
Concrete Drill Chip Top Bit (SDSplus Shank) Set of 10 Units for Small Capacity Hammer Drills (Unika)
Unika
[Features]
· The carbide tip and cutting edge of the candle type have been made thin, allowing it to drill workpieces sharply and improving the drilling speed.
· The center point at the end of the carbide tip exhibits excellent positioning performance to facilitate drilling that is close to a perfect circle.
· Center point suppress core vibration during drilling to reduce vibration load during operation.
[Applications]
· Work materials: Concrete, blocks, mortar, Japanese walls.
[Set Contents]
· 3.5, 4.3, 4.8, 5.0 mm (total length 110 mm) 1 pc each
· 6.4, 8.5, 10.5, 12.5, 12.7, 14.5 mm (total length 160 mm) x 1 pc eachConfigure Now
Ships as soon as 4 Days -
Concrete Drill for Vibration Drill (Straight Shank) (Trusco Nakayama)
Trusco Nakayama
[Features]
· Achieves fantastic cutting quality by using an ultra-hard tip with excellent durability, and employing a specially designed blade tip shape and angle.Configure Now
Ships as soon as 4 Days -
Concrete Drill (SDSplus Shank) for Small Capacity Hammer Drills (Trusco Nakayama)
Trusco Nakayama
[Features]
· The carbide tip and cutting edge of the candle type have been made thin, allowing it to drill workpieces sharply and improving the drilling speed.
· The center point at the end of the carbide tip exhibits excellent positioning performance to facilitate drilling that is close to a perfect circle.
· Center point suppress core vibration during drilling to reduce vibration load during operation.
[Applications]
· Work materials: Concrete, blocks, mortar, Japanese walls.Configure Now
Ships as soon as 4 Days -
Concrete Drill "SDS-Plus UX" (SDSplus Shank) for Small Capacity Hammer Drills (Trusco Nakayama)
Trusco Nakayama
[Features]
· It can make a hole close to a perfect circle and makes inserting an anchor smooth.
· The blade tip is a cross blade which can penetrate a deck plate.
· The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize pinching even when reinforced steel bar is struck.
[Applications]
· Work material: Deck plate + Concrete, Block, Brick, Mortar, Gypsum board, Marble.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Concrete Drill (for Both Rotary and Vibration) (HOUSEBM)
HOUSEBM
[Features]
· Rotation mode: For drilling mortar, ALC, Japanese style walls, ceramic siding, pottery tile, etc.
· Impact mode: For drilling holes in concrete, blocks, brick, mortar, etc.Configure Now
Ships as soon as 4 Days -
Hex Shaft Bit J-Type (Rechargeable) (HOUSEBM)
HOUSEBM
[Features]
· With hexagonal shaft (subtense 6.35 mm), it can be directly mounted on rechargeable impact screwdrivers.
· An integrated type with reduced flare and superior durability.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 7 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Power Drill PWL Type (SDSplus Shank) (Sanko Techno)
Sanko Techno
[Features]
· Use of 5 flutes enables highly durable performance.
· Effectively handles rebar for an ultra-long life.
· Nearly perfectly circular holes can be drilled.
[Applications]
· Work materials: Concrete, blocks, mortar, deck plates (through) + concrete.
[Material]
· Blade: Carbide tipConfigure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Sanko Techno
[Features]
· Extension adapter for SDS-plus bits.
· Regular type drills also available as long and high/long types.
[Material]
· Body: AlloyConfigure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 4 Days -
Adapter for Power Kyujin Drill PQH Type (Hexagonal Shaft)
Sanko Techno
[Features]
· A dedicated adapter for the Power Kyujin Drill.Configure Now
Ships as soon as 4 Days -
Power Kyujin Drill PQH Type (Hexagonal Shaft)
Sanko Techno
[Features]
· The design specialized for high dust suction power dramatically improves the working environment.
· Chips and dust do not scatter and chips do not fall even when the ceiling is drilled, so a clean working environment can be maintained.
[Applications]
· Work materials: Concrete, blocks, mortar.
[Material]
· Blade: Carbide tipConfigure Now
Ships as soon as 4 Days -
All Drill® SDS SDS-Plus Shaft with Blister Pack (Sanko Techno)
Sanko Techno
[Features]
· Lightweight hammer drill that can be attached and detached with one touch.
· It efficiently transmits the drilling power to the cutting edge.
· Abundant sizes are available.
· Ideal size for anchor construction.
· Top edge shape allows for easy positioning.
[Applications]
· For drilling holes in concrete, blocks, mortar, etc.Configure Now
Ships as soon as 11 Days -
All Drill® HEX Hexagonal Shaft / Standard Type with Blister Pack (Sanko Techno)
Sanko Techno
[Features]
· Shank is a hex shaft type dedicated for hammer drills.
· Efficient transmission of striking and rotation force to the cutting edge for speedy drilling.
· With ideal spirals, it discharges cutting powder smoothly and increases drilling capacity.
· Special carbide alloy blade tip, strictly selected steel material, and uniquely heat treated shank provide excellent wear resistance.
· Hexagonal shaft drill with excellent durability and sharpness.
[Applications]
· For drilling holes in concrete, blocks, mortar, etc. (Use the dedicated stone material type for drilling stone).
[Specifications]
· Shank Diameter (mm): 13Configure Now
Ships as soon as 17 Days -
Sanko Techno
[Features]
· A single adapter supports all sizes of the all drill/MT type.
· 2 types available, for hexagonal shaft shanks and SDS-plus shaft shanks.
· A wide selection of long types is also available, making it convenient for drilling holes in the ceiling.Configure Now
Ships as soon as 11 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
Loading...
Configure
Filters
-
Metric / Inch
Brand
CAD
-
- 2D
- 3D
Related Categories to Concrete Drill Bits
-
- Carbide End Mills
- Concrete Drill Bits
- Chamfering & Centering Tools
- Core Drill Bits
- Crinkey Cutters
- Custom Size Straight Flute End Mills
- Cutting Tool Accessories
- Drill Bits
- Electric Drill Bits
- Hole Saws
- HSS End Mills
- Magnetic Drill Press Cutters
- Milling Inserts & Holders
- Reamers
- Specialized Cutters
- Step Drills
- Threading Tools
- Turning Tools
- Wood Drills & Cutters
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy