- Webcode Seach | Series
-
#CODE
- Discontinued Products
MenuClose
- MISUMI is open to support you, but some lead times may be impacted. Read more about our COVID 19 Response
Horizontal Vises
| Days to Ship |
|
|---|
-
Nabeya
For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.
Configure Now
Ships as soon as 4 Days -
Engineer's Vise (Square Shaft)
Trusco Nakayama
[Features]
· Tough body to maintain strong tightening force.Configure Now
Ships as soon as 4 Days -
Upright Vise (Heavy-Duty Type / Round Body Shaft)
Trusco Nakayama
[Features]
· Made of ductile cast iron and has impact resistance and durability. Withstands heavy use.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 5 Days -
Nabeya
[Features]
· Powerful angle vise.
· High fastening force: internal processing of the main body is done by broaching so the load loss is low and high fastening force is achieved.
· Highly durable: Tough cast iron and ductile parts are heavy duty, damage-resistant, and durable.
· Easy lubrication and smooth operation.
· Jaw portions are subjected to charcoal heat treatment with good durability; replacement is possible, allowing long vise service life.
· Stopper balls have heading so they will not come off.
· A turntable can be installed.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Nabeya
Made of ductile FCD600, even stronger than cast steel, and has a 35% larger mouth opening. The movable part and main unit are ductile FCD600 which will not be damaged. The high-strength socket S15CK has undergone carburizing and has been machined into a U-shape with 3 set screws to prevent excessive loosening due to impacts from above.
Configure Now
Ships as soon as 5 Days -
Engineer's Vise (Square Shaft) Jaw Fixing Screw Set【4 Pieces Per Package】
Trusco Nakayama
For use with a lead vise
Configure Now
Ships as soon as 4 Days -
Anvil Vise with Rotary Bench (Rectangular Body Shaft)
Trusco Nakayama
[Features]
· The main body is made of carbon steel cast steel, robust and long lasting.
· The turntable can rotate 360°.
· With anvil for better striking work and shock resistance.
[Applications]
· It can be used for work that involves striking.
· Since it rotates 360°, work can be performed at any angle.Configure Now
Ships as soon as 4 Days -
Trusco Nakayama
[Features]
· It is a sliding vise which cross-moves perpendicularly in the front/back and right/left directions.
· If attached to the drilling machine, the processing position can be easily moved.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Lead Vise with Turntable (Heavy Duty Rectangular Body Shaft) Connector【2 Pieces Per Package】
Trusco Nakayama
Clamp for lead vise with turntable.
Configure Now
Ships as soon as 4 Days -
Vise with Rotating Table (for Light Work) TRV-100【1-4 Pieces Per Package】
Trusco Nakayama
[Features]
· Suitable for light work and can be rotated by 360°. With anvilConfigure Now
Ships as soon as 4 Days -
Trusco Nakayama
[Features]
· Ductile cast iron so it is unlikely to be damaged due to heavy-duty work.
· Ideal for processing irregular materials.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Full Turn Vise Suction Cup Type
AS ONE
【Product Specifications】
・Product name： Adhesive disk type
・Size (mm)： 130 x 110 x 167
・Weight (kg)： About 1.3
・Material： Aluminum die casting
・Opening/closing width： 60mmConfigure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 5 Days -
JIS Vise Mouthpiece (2 Pieces 1 Set)
Nabeya
[Features]
· JIS vise base (2-piece set) for side-vise partsConfigure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 5 Days -
R Type Vise Mouthpiece (2 Pieces 1 Set)
Nabeya
Horizontal vise component, R-type vise (upright type) clamp.
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 32 Days -
Vise Mounting Bolt Set【3 Pieces Per Package】
Nabeya
Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Nabeya
[Features]
· Can be mounted on your current vise with the magnet.
· Can be used for any vise whether it is industrial or for do-it-yourself carpenters, machine vises, or work vises.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 32 Days -
Woodwork Vise for School Teaching Material (Under Platform Type)
Nabeya
[Features]
· A tool type that can be mounted on the top surface of a workbench.
· The main body and movable parts are made of robust hard cast iron FC250.
· Trapezoidal screws are used for powerful tightening.
· Stopper balls are integrated casting, so they will not come off.
· All parts are interchangeable and replaceable.Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Woodwork Vise for School Teaching Material (Under Platform Type)
Nabeya
A tool type that can be mounted on the top surface of a workbench. The main body and movable parts are made of tough cast iron FC250. The screw is trapezoidal type and strong tightening is possible. Stopper balls are integrated casting, so they will not come off. All parts are compatible and replaceable.
Configure Now
Ships as soon as 4 Days -
Nabeya
[Features]
· Upright type.
· This product is the same type of vise as the A type with JIS mark.
· Accordingly, it is a superior product with excellent durability and high precision.
· The body is made of tough cast iron, providing the most excellent strength and impact resistance.
· The female screw uses ductile cast iron and will not be damaged.
· Jaw portions are subjected to heat treatment and have hardness of HRC 35-45.
· Offers excellent durability.
· A popular model with low price.
· Stopper balls on both end surfaces are fully heading-processed, so they will not come off even during long-term use.Configure Now
Ships as soon as 5 Days -
Nabeya
Horizontal vise component, R-type vise (upright type) female screw.
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 92 Days -
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 5 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Brand | Nabeya | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | TRAD | Nabeya | Nabeya | Hozan | Nabeya | Nabeya | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Ｍ＆Ｍ | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | AS ONE | AS ONE | Hozan | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya |
| Product Series | Engineer's Vise (Square Shaft) Jaw Fixing Screw Set【4 Pieces Per Package】 | Lead Vise with Turntable (Heavy Duty Rectangular Body Shaft) Connector【2 Pieces Per Package】 | Vise with Rotating Table (for Light Work) TRV-100【1-4 Pieces Per Package】 | Woodwork Vise for School Teaching Material (Under Platform Type) | Woodwork Vise for School Teaching Material (Under Platform Type) | ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 5 Days | 5 Days | 32 Days | 4 Days | 4 Days | 32 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 4 Days | 5 Days | 5 Days | 5 Days | 92 Days | 5 Days | 5 Days |
Loading...
Configure
Filters
-
Metric / Inch
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy